留言板

尊敬的读者、作者、审稿人, 关于本刊的投稿、审稿、编辑和出版的任何问题, 您可以本页添加留言。我们将尽快给您答复。谢谢您的支持!

姓名
邮箱
手机号码
标题
留言内容
验证码

考虑温度影响的粉煤灰路基填料剪切特性及本构模型

惠迎新,  张如江,  郭聚坤,  袁东东,  王迪,  袁化强,  闫升

惠迎新, 张如江, 郭聚坤, 袁东东, 王迪, 袁化强, 闫升. 考虑温度影响的粉煤灰路基填料剪切特性及本构模型[J]. 交通运输工程学报, 2026, 26(10): 89-103. doi: 10.19818/j.cnki.1671-1637.2026.341
引用本文: 惠迎新, 张如江, 郭聚坤, 袁东东, 王迪, 袁化强, 闫升. 考虑温度影响的粉煤灰路基填料剪切特性及本构模型[J]. 交通运输工程学报, 2026, 26(10): 89-103. doi: 10.19818/j.cnki.1671-1637.2026.341
HUI Ying-xin, ZHANG Ru-jiang, GUO Ju-kun, YUAN Dong-dong, WANG Di, YUAN Hua-qiang, YAN Sheng. Shear characteristics and constitutive model of fly ash subgrade filler considering temperature influence[J]. Journal of Traffic and Transportation Engineering, 2026, 26(10): 89-103. doi: 10.19818/j.cnki.1671-1637.2026.341
Citation: HUI Ying-xin, ZHANG Ru-jiang, GUO Ju-kun, YUAN Dong-dong, WANG Di, YUAN Hua-qiang, YAN Sheng. Shear characteristics and constitutive model of fly ash subgrade filler considering temperature influence[J]. Journal of Traffic and Transportation Engineering, 2026, 26(10): 89-103. doi: 10.19818/j.cnki.1671-1637.2026.341

考虑温度影响的粉煤灰路基填料剪切特性及本构模型

doi: 10.19818/j.cnki.1671-1637.2026.341
基金项目: 

宁夏自然科学基金项目 2025AAC030528

宁东能源化工基地本级重点支持领域科技项目 20250301NDKJ020

详细信息
    作者简介:

    惠迎新(1985-),男,内蒙古阿拉善盟人,教授,博士生导师,工学博士,E-mail:huiyx@seu.edu.cn

  • 中图分类号: U416.1

Shear characteristics and constitutive model of fly ash subgrade filler considering temperature influence

Funds: 

Natural Science Foundation of Ningxia 2025AAC030528

Key Support Area Science and Technology Project at the Level of Ningdong Energy Chemical Industry Base 20250301NDKJ020

More Information
Article Text (Baidu Translation)
  • 摘要:

    为推进寒区交通基础设施低碳化转型,实现工业固废资源化利用,本文通过自主研发的温控直剪系统,考察了法向应力、温度以及含水率对粉煤灰剪切特性的影响;基于室内试验数据,建立了不同条件下的粉煤灰本构模型,并将所建立的本构模型引入有限元数值模拟进行验证。研究结果表明:在负温-高含水率耦合条件下,粉煤灰表现出脆性破坏与显著的应变软化,而在负温低含水率或正温条件下,其破坏模式转为塑性破坏,表现为应变硬化或弱软化特征;体变行为受温度与含水率共同调控,正温时表现为剪缩,负温时随含水率增加,体变由剪缩逐渐转为剪胀,其临界含水率约为13%;抗剪强度及其指标随温度降低而显著提高,负温下内摩擦角与黏聚力随含水率增加持续增长,正温下内摩擦角随含水率增加而递减,黏聚力与抗剪强度则先增后减,并在最佳含水率为13.54%时达到峰值;数值模拟结果证实了本构模型的合理性。本文为粉煤灰在公路路基工程中的应用提供了可靠的理论工具,可助力工业固废的大规模资源化利用及交通基础设施的低碳化转型。

     

  • 图  1  粉煤灰级配曲线与微观形貌

    Figure  1.  Fly ash grading curve and micro-morphology

    图  2  土体冻融循环剪切试验仪

    Figure  2.  Shearing tester of soil undergoing freeze-thaw cycles

    图  3  剪切应力-剪切位移关系

    Figure  3.  Shear stress-displacement relationships

    图  4  法向位移-剪切位移关系

    Figure  4.  Vertical displacement-shear displacement relationships

    图  5  抗剪强度-法向应力关系

    Figure  5.  Shear strength-normal stress relationships

    图  6  抗剪强度和含水率关系曲线

    Figure  6.  Relationship curves between shear strength and moisture content

    图  7  抗剪强度指标变化

    Figure  7.  Variations of shear strength parameters

    图  8  黏聚-损伤模型示意

    Figure  8.  Schematic of the cohesive-damage model

    图  9  摩擦模型示意

    Figure  9.  Schematic of the frictional model

    图  10  黏聚-损伤-摩擦模型示意

    Figure  10.  Schematic of the cohesive-damage-friction constitutive model

    图  11  损伤演化机制及界面微元区域示意

    Figure  11.  Schematic of damage evolution mechanism and interface micro-element region

    图  12  Gompertz模型

    Figure  12.  Gompertz model

    图  13  粉煤灰试样有限元模型

    Figure  13.  Finite element model of fly ash specimen

    图  14  模拟与试验结果对比曲线

    Figure  14.  Comparison curvers of simulated and experimental results

    图  15  T=-10 ℃、w=38%、σn=900 kPa条件下剪切面上的剪切应力分布

    Figure  15.  Distribution of shear stress on the shear plane under the condition of T=-10 ℃, w=38%, σn=900 kPa

    图  16  T=-10 ℃、w=9%、σn=900 kPa条件下剪切面上的剪切应力分布

    Figure  16.  Distribution of shear stress on the shear plane under the condition of T=-10 ℃, w=9%, σn=900 kPa

    表  1  试验方案

    Table  1.   Experimental scheme

    因素 取值
    温度T/℃ -10、-5、0、5、10
    含水率w/% 9、13、17、24、31、38
    法向应力σn/kPa 300、600、900、1 200
    下载: 导出CSV

    表  2  抗剪强度和含水率的拟合关系

    Table  2.   Fitting relationships between shear strength and moisture content

    T/℃ σn/kPa 拟合多项式 wp+/% R2
    5 300 τp=-1.64w2+45.51w-90.38 13.88 0.971
    600 τp=-2.27w2+59.43w-62.93 13.09 0.942
    900 τp=-1.74w2+46.73w+93.86 13.43 0.945
    1 200 τp=-2.45w2+61.86w+129.92 12.62 0.961
    10 300 τp=-1.14w2+33.10w-36.02 14.52 0.982
    600 τp=-2.293w2+63.58w-142.67 13.86 0.964
    900 τp=-2.47w2+67.22w-76.08 13.61 0.961
    1 200 τp=-1.21w2+32.23w+257.46 13.32 0.912
    下载: 导出CSV

    表  3  在α=0.05下的F检验临界值

    Table  3.   Critical values of the F-test at α=0.05

    试验因素 fX fE 临界值
    σn 3 60 2.758
    T 4 60 2.525
    w 5 60 2.368
    σn×T 12 60 1.917
    σn×w 15 60 1.836
    T×w 20 60 1.748
    下载: 导出CSV

    表  4  因素间交互作用显著性分析结果

    Table  4.   Results of the significance analysis on factor interactions

    试验因素 SX/kPa2 SE/kPa2 fX fE 均方 F 显著性
    σn 1 710 860 3 570 287 1 074.0 0.000
    T 4 049 343 4 1 012 336 1 906.0 0.000
    w 982 658 5 196 532 370.0 0.000
    σn×T 137 517 12 11 460 22.0 0.000
    σn×w 3 312 15 221 0.4 0.969
    T×w 2 584 657 20 531 243.0 0.000
    σn×T×w 31 869 60
    下载: 导出CSV

    表  5  负温且w > wp+条件下的模型参数

    Table  5.   Model parameters under the conditions of negative temperature and w > wp+

    w/% T/℃ σn/kPa δp/mm δr/mm φ/(°) c/kPa φr/(°)
    38 -10 900 3.437 7.501 31.48 956.89 32.58
    24 -10 900 4.123 15.169 27.83 340.60 31.51
    下载: 导出CSV

    表  6  本构模型参数

    Table  6.   Parameters for the constitutive model

    试验条件 w/% T/℃ σn/kPa Rp K n φ/(°) c/kPa
    正温,w≤wp+ 9 -10 900 1.03 2 548.00 0.988 4 23.11 98.726
    负温,w≤wp+ 17 5 600 1.08 2 494.02 0.976 0 16.48 119.670
    下载: 导出CSV
  • [1] CURPEN S, TEUTSCH N, KOVLER K, et al. Evaluating life cycle environmental impacts of coal fly ash utilization in embankment versus sand and landfilling [J]. Journal of Cleaner Production, 2023, 385: 135402. doi: 10.1016/j.jclepro.2022.135402
    [2] HUI Y X, ZHANG R J, MEN G Y, et al. Fly ash for sustainable roads: A comprehensive review on mechanisms and performance optimization [J]. Journal of Road Engineering, 2025, 5(4): 618-638. doi: 10.1016/j.jreng.2025.07.001
    [3] BHATT A, PRIYADARSHINI S, ACHARATH MOHANAKRISHNAN A, et al. Physical, chemical, and geotechnical properties of coal fly ash: A global review [J]. Case Studies in Construction Materials, 2019, 11: e00263. doi: 10.1016/j.cscm.2019.e00263
    [4] HU Y, TANG J P, FEI Y X, et al. Enhancement of Zn adsorption on coal fly ash-based geopolymer with steel slag incorporation: Leaching behavior and performance insights [J]. Environmental Pollution, 2025, 367: 125639. doi: 10.1016/j.envpol.2025.125639
    [5] WU H Q, ZHANG J X, CHEN Y L, et al. Stress-strain behavior and failure criterion study of polypropylene fiber reinforced recycled aggregate concrete under triaxial stress state [J]. Construction and Building Materials, 2024, 448: 138185. doi: 10.1016/j.conbuildmat.2024.138185
    [6] ZHU J F, WANG Z Q, TAO Y L, et al. Macro-micro investigation on stabilization sludge as subgrade filler by the ternary blending of steel slag and fly ash and calcium carbide residue [J]. Journal of Cleaner Production, 2024, 447: 141496. doi: 10.1016/j.jclepro.2024.141496
    [7] 黄敦文, 邹有宝, 窦淑豪, 等. 碱激发粉煤灰-矿渣混凝土的徐变性能预测[J]. 交通运输工程学报, 2026, 26(6): 115-122. doi: 10.19818/j.cnki.1671-1637.2026.128

    HUANG Dun-wen, ZOU You-bao, DOU Shu-hao, et al. Creep prediction of alkali-activated fly ash-slag concrete[J]. Journal of Traffic and Transportation Engineering, 2026, 26(6): 115-122. doi: 10.19818/j.cnki.1671-1637.2026.128
    [8] LI M Y, LIU S Y, WANG Z C, et al. Static and dynamic characteristics of alkali residue-based lightweight soil subgrade filler subjected to freeze-thaw cycles [J]. Transportation Geotechnics, 2025, 55: 101687. doi: 10.1016/j.trgeo.2025.101687
    [9] 邓友生, 李龙, 孙雅妮, 等. 水泥粉煤灰处理湿陷性黄土路基承载性能[J]. 交通运输工程学报, 2023, 23(4): 92-103. doi: 10.19818/j.cnki.1671-1637.2023.04.006

    DENG You-sheng, LI Long, SUN Ya-ni, et al. Bearing capability of collapsible loess subgrade through cement-fly ash treatment [J]. Journal of Traffic and Transportation Engineering, 2023, 23(4): 92-103. doi: 10.19818/j.cnki.1671-1637.2023.04.006
    [10] 张志权, 井彦林, 孔德泉, 等. 浸水作用下二灰黄土的稳定性[J]. 交通运输工程学报, 2018, 18(1): 61-70. doi: 10.3969/j.issn.1671-1637.2018.01.006

    ZHANG Zhi-quan, JING Yan-lin, KONG De-quan, et al. Stability of lime-fly ash loess under action of water immersion [J]. Journal of Traffic and Transportation Engineering, 2018, 18(1): 61-70. doi: 10.3969/j.issn.1671-1637.2018.01.006
    [11] ZHANG R H, ZHOU J J, GONG X N, et al. Experimental and DEM simulation on engineering properties of soft soil stabilized by industrial solid waste-cement synergy [J]. Case Studies in Construction Materials, 2025, 22: e04852. doi: 10.1016/j.cscm.2025.e04852
    [12] JUNJIE H, CAI D G, SU Q, et al. Study on frost resistance improvement of foamed concrete used as subgrade filler [J]. Construction and Building Materials, 2025, 468: 140446. doi: 10.1016/j.conbuildmat.2025.140446
    [13] WANG H L, HE M. Laboratory and field test study on fly ash as subgrade filling [J]. Advanced Materials Research, 2010, 146/147: 859-864. doi: 10.4028/www.scientific.net/AMR.146-147.859
    [14] ŠEŠLIJA M, RADOVIĆ N, VUKOJEVIĆ M, et al. Physico-mechanical properties of fly ash applicable in road construction [J]. Journal of the Croatian Association of Civil Engineers, 2017, 69(10): 923-932. doi: 10.14256/JCE.1860.2016
    [15] BAYKAL G, EDINÇLILER A, SAYGıLı A. Highway embankment construction using fly ash in cold regions [J]. Resources, Conservation and Recycling, 2004, 42(3): 209-222. doi: 10.1016/j.resconrec.2004.04.002
    [16] 唐杰, 邵国霞, 郑中元. 粉煤灰基地聚物在软土地基加固中的应用效果[J]. 矿产综合利用, 2026, 47(5): 38-43.

    TANG Jie, SHAO Guo-xia, ZHENG Zhong-yuan. Application effect of fly ash based geopolymer in foundation stabilization with soft soil [J]. Multipurpose Utilization of Mineral Resources, 2026, 47(5): 38-43.
    [17] 《中国公路学报》编辑部. 中国路基工程学术研究综述·2025 [J]. 中国公路学报, 2025, 38(12): 1-153.

    Editorial Department of China Journal of Highway and Transport. Review on China's subgrade engineering research: 2025 [J]. China Journal of Highway and Transport, 2025, 38(12): 1-153.
    [18] 惠迎新, 张如江, 袁东东, 等. 粉煤灰改良土在公路工程中的应用研究进展[J]. 长安大学学报(自然科学版), 2026, 46(1): 1-22.

    HUI Ying-xin, ZHANG Ru-jiang, YUAN Dong-dong, et al. Advances in application research of fly ash-stabilized soil for highway engineering [J]. Journal of Chang'an University (Natural Science Edition), 2026, 46(1): 1-22.
    [19] XU L, GUAN X Q, LIAO H J, et al. A strain work constitutive model for structured soils [J]. Computers and Geotechnics, 2025, 184: 107243. doi: 10.1016/j.compgeo.2025.107243
    [20] LI X C, WENG X L, ZHOU S Q, et al. A non-orthogonal constitutive model for unsaturated structured soils using sub-loading plasticity [J]. Computers and Geotechnics, 2026, 190: 107753. doi: 10.1016/j.compgeo.2025.107753
    [21] HOU B, DANG F N, PENG C H, et al. Study on freeze-thaw resistance of cellulose modified loess based on complex stress state [J]. Construction and Building Materials, 2025, 458: 139659. doi: 10.1016/j.conbuildmat.2024.139659
    [22] LIANG J Y, LI H W, QI J L, et al. A non-orthogonal elastoplastic constitutive model incorporating cohesion degradation for frozen soil [J]. Computers and Geotechnics, 2025, 183: 107231. doi: 10.1016/j.compgeo.2025.107231
    [23] SHI S, ZHANG F, FENG D C, et al. Creep constitutive model for frozen soils based on hardening and damage effects [J]. KSCE Journal of Civil Engineering, 2020, 24(4): 1146-1158. doi: 10.1007/s12205-020-1681-y
    [24] LAI Y M, JIN L, CHANG X X. Yield criterion and elasto-plastic damage constitutive model for frozen sandy soil [J]. International Journal of Plasticity, 2009, 25(6): 1177-1205. doi: 10.1016/j.ijplas.2008.06.010
    [25] 郑立阳, 惠迎新, 郭聚坤, 等. 粉煤灰路基的力学变形特性及综合含水率研究[J]. 硅酸盐通报, 2025, 44(4): 1486-1494, 1524.

    ZHENG Li-yang, HUI Ying-xin, GUO Ju-kun, et al. Mechanical deformation characteristics and comprehensive water content of fly ash subgrade [J]. Bulletin of the Chinese Ceramic Society, 2025, 44(4): 1486-1494, 1524.
    [26] 惠迎新, 顾士周, 郭聚坤, 等. 单向冻结下粉煤灰路基水-热-力耦合特性研究[J]. 硅酸盐通报, 2025, 44(11): 4048-4059.

    HUI Ying-xin, GU Shi-zhou, GUO Ju-kun, et al. Thermo-hydro-mechanical coupling characteristics of fly ash subgrade in condition of unidirectional freezing [J]. Bulletin of the Chinese Ceramic Society, 2025, 44(11): 4048-4059.
    [27] CHEN H E, DING Q, DU H, et al. Evolution and prediction model of pore size distribution in lean clay subjected to freeze-thaw cycles [J]. Construction and Building Materials, 2025, 493: 143138. doi: 10.1016/j.conbuildmat.2025.143138
    [28] YANG X, HU Z Q, LI H R, et al. Effect of freeze-thaw cycles on mechanical properties and microstructure of artificially prepared site soil [J]. Construction and Building Materials, 2025, 485: 141878. doi: 10.1016/j.conbuildmat.2025.141878
    [29] ARABCHOBDAR F, SADEGHI H, GHOLAMI M, et al. Multi-directional deformation and hydraulic conductivity of expansive soils subjected to freeze-thaw cycles from three distinct initial saturation levels [J]. Journal of Rock Mechanics and Geotechnical Engineering, 2025, 17(9): 5939-5953. doi: 10.1016/j.jrmge.2024.10.007
    [30] NG C W W, SADEGHI H, JAFARZADEH F, et al. Effect of microstructure on shear strength and dilatancy of unsaturated loess at high suctions [J]. Canadian Geotechnical Journal, 2020, 57(2): 221-235. doi: 10.1139/cgj-2018-0592
    [31] KHODAYARI M R, AHMADI M M. Excess pore water pressure along the friction sleeve of a piezocone penetrating in clay: Numerical study [J]. International Journal of Geomechanics, 2020, 20(7): 04020100. doi: 10.1061/(ASCE)GM.1943-5622.0001702
    [32] BAREITHER C A, BENSON C H, EDIL T B. Reproducibility of direct shear tests conducted on granular backfill materials [J]. Geotechnical Testing Journal, 2008, 31(1): 84-94. doi: 10.1520/GTJ100878
    [33] 陈晓, 何鹏飞, 董建华, 等. 冻土-构筑物界面粘聚-损伤-摩擦本构模型[J]. 兰州理工大学学报, 2021, 47(5): 115-121.

    CHEN Xiao, HE Peng-fei, DONG Jian-hua, et al. Cohesion-damage-friction constitutive model of the frozen soil-structure interface [J]. Journal of Lanzhou University of Technology, 2021, 47(5): 115-121.
    [34] LI H X, YAN C G, SHI Y L, et al. A statistical damage model for the soil-structure interface considering interface roughness and soil shear area [J]. Construction and Building Materials, 2024, 431: 136606. doi: 10.1016/j.conbuildmat.2024.136606
  • 加载中
图(16) / 表(6)
计量
  • 文章访问数:  6
  • HTML全文浏览量:  3
  • PDF下载量:  0
  • 被引次数: 0
出版历程
  • 收稿日期:  2026-01-19
  • 录用日期:  2026-05-27
  • 修回日期:  2026-04-29
  • 刊出日期:  2026-10-28

目录

    /

    返回文章
    返回