LI Ping, WANG Bing-gang, ZHANG Zheng-qi. Design method of asphalt mixture aggregate gradation based on high-temperature performance[J]. Journal of Traffic and Transportation Engineering, 2010, 10(6): 9-14. doi: 10.19818/j.cnki.1671-1637.2010.06.002
Citation: LI Ping, WANG Bing-gang, ZHANG Zheng-qi. Design method of asphalt mixture aggregate gradation based on high-temperature performance[J]. Journal of Traffic and Transportation Engineering, 2010, 10(6): 9-14. doi: 10.19818/j.cnki.1671-1637.2010.06.002

Design method of asphalt mixture aggregate gradation based on high-temperature performance

doi: 10.19818/j.cnki.1671-1637.2010.06.002
More Information
  • Author Bio:

    LI Ping(1978-),male,associate professor,PhD,+86-731-82309571,lipingchd@126.com

  • Received Date: 2010-07-03
  • Publish Date: 2010-12-25
  • In order to gain the aggregate gradation with extrusion, density and stabilization, the density test of coarse aggregate was used to research the influences of vessel volume and spreading mode on aggregate density, penetration test was established based on MTS, and Hamburg wheel rutting test was taken for different mixtures. The gradation of coarse aggregate was confirmed by penetration test, and the aggregate gradations of asphalt mixtures were combined by Bailey method. Test result shows that because of the difference of vessel volumes and falling modes of aggregate, the home and abroad test difference of loose densities of aggregate is 6%. The good high-temperature performance of the mixture designed with Bailey method can not be assured. Penetration test can distinguish the stability of coarse aggregate effectively, and the correlation coefficient with the rutting depth of mixture is 0.71. So the high-temperature performance of mixture can be kept well by using the method.

     

  • loading
  • [1]
    HUANG Wei-dong, YOU Hong, ZHONG Shun-fu. ModifiedSMAdesign procedure based on voids in mineral aggregate[J]. Journal of Tongji University: Natural Science, 2009, 37 (4): 500-504. (in Chinese) https://www.cnki.com.cn/Article/CJFDTOTAL-TJDZ200904019.htm
    [2]
    LI Xiao-jun, FENG Fan. A microstructure-based numericalsi mulation of semi-circular bending test of asphalt concrete[J]. Journal of Chang an University: Natural Science Edition, 2010, 30 (4): 18-22. (in Chinese) https://www.cnki.com.cn/Article/CJFDTOTAL-XAGL201004006.htm
    [3]
    SHA Ai-min, ZHOU Qing-hua, YANG Qin. Material com-position design methodfor high modulus asphalt concrete[J]. Journal of Chang an University: Natural Science Edition, 2009, 29 (3): 1-5. (in Chinese) https://www.cnki.com.cn/Article/CJFDTOTAL-XAGL200903000.htm
    [4]
    JI A Jin-xiu, HAN Sen, XU Ou-ming. Anti-shearing per-formance of asphalt treated base mixtures[J]. Journal ofChang an University: Natural Science Edition, 2009, 29 (3): 23-26. (in Chinese) https://www.cnki.com.cn/Article/CJFDTOTAL-XAGL200903005.htm
    [5]
    TAN Yi-qiu, SHI Kun-lei, ZHU Feng, et al. Impact of asphaltmixture gradation on stress-absorbing layer performance[J]. Journal of Chang an University: Natural Science Edition, 2009, 29 (2): 33-36. (in Chinese) https://www.cnki.com.cn/Article/CJFDTOTAL-XAGL200902011.htm
    [6]
    WANG Fu-yu, SHA Qing-lin, DAI Wen-ting, et al. Applicationof aggregate gradation test method of VCAACin highwayconstruction[J]. Journal of Chang an University: NaturalScience Edition, 2008, 28 (5): 39-44. (in Chinese) https://www.cnki.com.cn/Article/CJFDTOTAL-XAGL200805011.htm
    [7]
    ZHAO Zhan-li, ZHANG Zheng-qi, XUE Jian-she, et al. Evaluation of skid resistance gradations of asphalt mixture basedon fractal theory[J]. Journal of Chang an University: NaturalScience Edition, 2008, 28 (3): 6-10. (in Chinese) https://www.cnki.com.cn/Article/CJFDTOTAL-XAGL200803002.htm
    [8]
    FU Qi-lin, CHENShuan-fa, CHEN Hua-xin. Hightempera-ture stability of open-graded large stone asphalt mixes[J]. Journal of Chang an University: Natural Science Edition, 2010, 30 (2): 20-23. (in Chinese) https://www.cnki.com.cn/Article/CJFDTOTAL-XAGL201002006.htm
    [9]
    FENG Xin-jun, HAO Pei-wen. Gradation design method ofdense-graded asphalt stabilized macadam base[J]. ChinaJournal of Highway and Transport, 2009, 22 (4): 33-38. (in Chinese) https://www.cnki.com.cn/Article/CJFDTOTAL-ZGGL200904007.htm
    [10]
    WU Kuang-huai, ZHANG Xiao-ning. Coarse aggregate void-filling method for asphalt mixture design[J]. Central SouthHighway Engineering, 2004, 29 (2): 58-64. (in Chinese) https://www.cnki.com.cn/Article/CJFDTOTAL-ZNGL200402015.htm
    [11]
    WANG Li-jiu, LI U Hui. Method of aggregate gradationdesign of skeleton denseness asphalt mixture[J]. China Journalof Highway and Transport, 2008, 21 (5): 6-9. (in Chinese) https://www.cnki.com.cn/Article/CJFDTOTAL-ZGGL200805003.htm
    [12]
    SHEN Kang, CHEN Ai-wen, LU Wen-jiang, et al. Influ-ence of Bailey s chosen unit weight on performance of asphaltmixture[J]. Journal of Chang an University: Natural ScienceEdition, 2008, 28 (3): 16-20. (in Chinese) https://www.cnki.com.cn/Article/CJFDTOTAL-XAGL200803004.htm
    [13]
    HAO Pei-wen, XUJin-zhi, ZHOU Huai-zhi. Key technolo-gies of aggregate blending by Bailey method[J]. Journal ofChang an University: Natural Science Edition, 2004, 24 (6): 1-6. (in Chinese)
    [14]
    JTG E42—2005, test method of aggregate for highway engin-eering[S].
    [15]
    AASHTO T326—2005, standard method of test for uncom-pacted void content of coarse aggregate (as influence by parti-cle shape, surface texture, and grading)[S].
    [16]
    JTG F40—2004, technical specifications for construction ofhighway asphalt pavements[S]. (in Chinese)

Catalog

    Article Metrics

    Article views (1258) PDF downloads(552) Cited by()
    Related

    /

    DownLoad:  Full-Size Img  PowerPoint
    Return
    Return