Volume 26 Issue 10
Oct.  2026
Turn off MathJax
Article Contents
HOU Shuai-long, YE Hua-wen, SONG Wen-yu, YANG Xuan, WU Liu-yang, XU Xun. Trigonometric series solution for natural vibration characteristics of simply supported steel-concrete composite beams considering interface slip and damping effect[J]. Journal of Traffic and Transportation Engineering, 2026, 26(10): 165-175. doi: 10.19818/j.cnki.1671-1637.2026.262
Citation: HOU Shuai-long, YE Hua-wen, SONG Wen-yu, YANG Xuan, WU Liu-yang, XU Xun. Trigonometric series solution for natural vibration characteristics of simply supported steel-concrete composite beams considering interface slip and damping effect[J]. Journal of Traffic and Transportation Engineering, 2026, 26(10): 165-175. doi: 10.19818/j.cnki.1671-1637.2026.262

Trigonometric series solution for natural vibration characteristics of simply supported steel-concrete composite beams considering interface slip and damping effect

doi: 10.19818/j.cnki.1671-1637.2026.262
Funds:

National Natural Science Foundation of China 52278219

Science and Technology Research and Development Program of China Railway Group Limited 2023-Special Project-02

Natural Science Foundation of Sichuan Province 2026NSFSC0304

Project Funded by China Scholarship Council 202507000099

More Information
  • Corresponding author: YE Hua-wen, professor, PhD, E-mail: hbha2000@163.com
  • Received Date: 2025-11-05
  • Accepted Date: 2026-03-20
  • Rev Recd Date: 2026-01-22
  • Publish Date: 2026-10-28
  • To derive a simplified and mechanically rigorous formula for the natural vibration frequency, the shear stiffness of the shear connectors was employed to characterize the interface slip effect. The relationship between the damping effect and the shear stiffness was established. Subsequently, trigonometric series were utilized to construct the time-varying displacement response and the interface slip function of the composite beam. By applying Hamilton's principle, an analytical solution for the vertical natural vibration frequency was derived with the synergistic effect of both interface slip and damping taken into account. Building on this, a practical simplified formula for the natural vibration frequency reduction coefficient was proposed. Finally, through a comparative analysis with an extensive body of existing literature on both measured vibration modes and calculation methods, the effectiveness and accuracy of the proposed approach were validated. The results indicate that after considering interface slip and damping effects, the fundamental frequency of steel-concrete composite beams can be reduced by up to 17%. These effects primarily influence the lower-order natural vibration frequencies (first five modes), with a negligible impact on higher-order modes. The damping ratio increases with the higher mode order and decreases with greater shear stiffness. A damping ratio of 1% is recommended for practical applications. Compared to existing calculation methods, the trigonometric series solution considering interface slip and damping effect is applicable to calculating the natural vibration frequencies of simply supported steel-concrete composite beams with varying connection degrees (shear stiffness and stud spacing). It is more concise, physically intuitive, and offers higher computational accuracy.

     

  • loading
  • [1]
    WANG X H, YANG Q W, PENG X, et al. A review of mechanical performance studies on composite concrete beams and slabs[J]. Materials, 2025, 18(14): 3259. doi: 10.3390/ma18143259
    [2]
    NIE J G, CAI C S. Steel-concrete composite beams considering shear slip effects[J]. Journal of Structural Engineering, 2003, 129(4): 495-506. doi: 10.1061/(ASCE)0733-9445(2003)129:4(495)
    [3]
    HOU Zhong-ming, XIA He, ZHANG Yan-ling. The influence of the shear stiffness of stud connectors on the natural vibration characteristics of steel-concrete composite beams[J]. China Railway Science, 2012, 33(6): 24-29.
    [4]
    NIE Jian-guo, SHEN Ju-min, YU Zhi-wu. A reduced rigidity method for calculation deformation of composite steel-concrete beams[J]. China Civil Engineering Journal, 1995, 28(6): 11-17.
    [5]
    WANG Jing-quan, LV Zhi-tao, LIU Zhao. Consistency factor method for calculating deformation of composite steel-concrete girders with partial shear connection[J]. Journal of Southeast University (Natural Science Edition), 2005, 35(S1): 5-10.
    [6]
    YE Hua-wen, JIANG Cheng-chuan, HUANG Ao, et al. A novel theoretical method of elastic bending deformation of steel-concrete composite beams based on trigonometric series solution[J]. Journal of Building Structures, 2024, 45(5): 253-261.
    [7]
    DENG Ji-hua, HE Zi-an, HE Jun, et al. Exact finite element method for time-dependent analysis of steel-concrete composite beam considering shear deformation[J]. Journal of Traffic and Transportation Engineering, 2026, 26(5): 111-124.
    [8]
    ZHANG Shu-bing, WANG Jing-quan, LI Ming, et al. A modified stiffness reduction method for calculating the natural frequencies of composite beams considering the effect of interfacial slippage[J]. China Civil Engineering Journal, 2015, 48(12): 41-49.
    [9]
    WANG Hui, SHEN Rui-li, LIU Gao, et al. Longitudinal movement characteristics and rational restraint systems of long-span railway suspension bridges under train load[J]. Journal of Traffic and Transportation Engineering, 2026, 26(6): 21-35. doi: 10.19818/j.cnki.1671-1637.2026.232
    [10]
    LI Xia-yuan, WAN Shui, FU Li-xiang, et al. A novel box girder beam element considering equivalent shear deformation freedom of corrugated steel webs[J]. Journal of Traffic and Transportation Engineering, 2025, 25(5): 385-398. doi: 10.19818/j.cnki.1671-1637.2025.05.025
    [11]
    HOU Zhong-ming, XIA He, WANG Yuan-qing, et al. Dynamic reduction coefficients for a steel-concrete composite beam[J]. Journal of Vibration and Shock, 2015, 34(4): 74-81.
    [12]
    TANG Q C, ZHU L. Vibration control of the steel-concrete composite box girder bridge with slip and shear-lag effects by MTMDs under the train-bridge interaction[J]. Structural Control and Health Monitoring, 2023, 2023(1): 6696148.
    [13]
    XU Q Z, WANG J Q, SEBASTIAN W. Experimental and theoretical study on the dynamic properties of externally prestressed steel-concrete composite beams[J]. Structures, 2025, 80: 109716. doi: 10.1016/j.istruc.2025.109716
    [14]
    ZHOU Wang-bao, JIANG Li-zhong, YU Zhi-wu, et al. Free vibration characteristics of steel-concrete composite continuous box girder considering shear lag and slip[J]. China Journal of Highway and Transport, 2013, 26(5): 88-94.
    [15]
    ZHOU W B, JIANG L Z, HUANG Z, et al. Flexural natural vibration characteristics of composite beam considering shear deformation and interface slip[J]. Steel and Composite Structures, 2016, 20(5): 1023-1042. doi: 10.12989/scs.2016.20.5.1023
    [16]
    LUO H, ZHONG H Q, CHEN B C, et al. Sensitivity-based finite element model updating of a scaled steel-concrete composite box girder considering interfacial slip and boundary conditions[J]. Structures, 2026, 84: 110927. doi: 10.1016/j.istruc.2025.110927
    [17]
    YAN L B, CAO L, HE Y K, et al. Dynamic characteristics analysis of three-layer steel-concrete composite beams[J]. Buildings, 2025, 15(8): 1347. doi: 10.3390/buildings15081347
    [18]
    SUN Qi-kai, ZHANG Nan, LIU Xiao. Dynamic characteristic analysis of steel-concrete composite continuous beams considering the effect of beam shear deformation[J]. Journal of Vibration and Shock, 2023, 42(2): 258-266.
    [19]
    HE G H, YANG X. Dynamic analysis of two-layer composite beams with partial interaction using a higher order beam theory[J]. International Journal of Mechanical Sciences, 2015, 90: 102-112. doi: 10.1016/j.ijmecsci.2014.10.020
    [20]
    TAN M Y, GUO D Q, YANG Q, et al. In-plane and out-of-plane free vibration analysis of thin-walled box beams based on one-dimensional higher-order beam theory[J]. Mechanics of Advanced Materials and Structures, 2024, 31(22): 5638-5652. doi: 10.1080/15376494.2023.2218049
    [21]
    SUN Qi-kai, ZHANG Nan, LIU Xiao. Analytical solution of dynamic characteristics of steel-concrete composite beams considering shear deformation[J]. Journal of the China Railway Society, 2023, 45(6): 161-168.
    [22]
    HOU Zhong-ming, XIA He, ZHANG Yan-ling. Analytical solution to dynamic characteristics of simply-supported steel-concrete composite beams[J]. Journal of the China Railway Society, 2014, 36(3): 100-105.
    [23]
    WANG Wei-an, LI Qiao, ZHAO Can-hui, et al. Dynamic property of long-span steel-concrete composite bridge with external tendons[J]. Journal of Highway and Transportation Research and Development, 2013, 30(3): 59-65, 71.
    [24]
    ZHANG Shu-bing, WANG Jing-quan, YIN Hui-guang. Comparative study of two calculation methods for equivalent damping ratios of composite beams[J]. Journal of Building Structures, 2013, 34(S1): 395-400.
    [25]
    QI Jing-jing, JIANG Li-zhong, ZHANG Chuan-zeng, et al. Effects of interface slip, vertical uplift and shear deformation on dynamic behavior of steel-concrete composite continuous beams[J]. Journal of Central South University (Science and Technology), 2010, 41(6): 2334-2343.
    [26]
    YANG Shi-jun, YANG Yang, WANG Zhe-wei, et al. Damping ratio identification of beam bridge based on vehicle bridge coupling theory under single vehicle[J]. Chinese Journal of Theoretical and Applied Mechanics, 2024, 56(4): 1098-1109.
    [27]
    WANG Jing-quan, YIN Hui-guang, ZHANG Shu-bing, et al. Experimental investigation on dynamic properties of steel- concrete composite beams considering effect of interfacial slip[J]. Journal of Building Structures, 2016, 37(2): 142-149.
    [28]
    SUN Qi-kai, ZHANG Nan, LIU Xiao, et al. Free vibration characteristics of steel-concrete composite beams considering the longitudinal stiffness distribution based on the energy method[J]. Journal of Vibration and Shock, 2021, 40(10): 67-72, 102.
    [29]
    ZHANG Yan-ling, FENG Kang-ping, LIU Huan, et al. Experimental research on dynamic responses of steel-concrete composite beams[J]. Journal of Guangxi University (Natural Science Edition), 2017, 42(1): 97-107.
    [30]
    XU R Q, WU Y F. Static, dynamic, and buckling analysis of partial interaction composite members using Timoshenko's beam theory[J]. International Journal of Mechanical Sciences, 2007, 49(10): 1139-1155. doi: 10.1016/j.ijmecsci.2007.02.006

Catalog

    Article Metrics

    Article views (33) PDF downloads(1) Cited by()
    Related

    /

    DownLoad:  Full-Size Img  PowerPoint
    Return
    Return