-
摘要: 在分析了现行高速公路数据网络的基础上, 针对高速公路省域内的联网收费要求, 提出了数据网络底层扩展的全新技术模型, 并结合工程实践给出了两种实现方案, 列举了方案实现的关键配置。Abstract: This paper analyses the existing expressway data network, presents a new model based on the data network extended understratum, and gives out two achieved project, enumerates the key configure.
-
Key words:
- data network /
- expressway /
- understratum /
- design
-
表 1 VLAN1的群组端口设置
Table 1. VLAN1's configuration of group ports
VLAN Configuration Create VLAN: [1] VLAN Type: [Port-Based] Delete VLAN: [ ] Protocol ID (PID) : [None] VLAN Name: [VLAN#1] User-Defined PID: [0×0000] Management VLAN: [Yes] VLAN State: [Active] Port Membership 1-6 7-12 13-18 19-24 …… …… …… …… Unit#1 UUUUUU UUUUUU UUUUUU UUUUUU KEY: T为Tagged Port Member, U为Untagged Port Member, “……”为Not a Member of VLAN Use space bar to display choices, press〈Return〉or〈Enter〉to select choice Press Ctrl-R to return to previous menu. Press Ctrl-C to return to main menu 表 2 指定端口15为PVID=1的标识
Table 2. Assigning the 15thport's tag being PVID=1
VLAN Port Configuration Port: [15] Filter Tagged Frames: [No] Filter Untagged Frames: [No] Filter Unregistered Frames: [No] Port Name: [Port 15] PVID: [1] Port Priority: [0] Tagging: [Untagged Access] Use space bar to display choices, press〈Return〉or〈Enter〉to select choice Press Ctrl-R to return to previous menu.Press Ctrl-C to retrun to main menu. -
[1] Geoff Bennett, 王岚波.TCP/IP互联网络的规划与设计[M]. 北京: 电子工业出版社, 1997. [2] Tarek N Saadawi, 黄岩. 远程通信网络基础[M]. 北京: 电子工业出版社, 1996. [3] 孙大跃, 江代有. 高速公路网络工程技术[M]. 北京: 人民交通出版社, 2001.