-
摘要: 为了合理处理列车车体结构分析中典型的板梁偏心连接问题, 分别基于罚单元法和La-grange乘子法构造了板梁组合结构模型, 将组合结构中相关节点对之间通过偏心关系建立的约束方程引入到平衡方程中, 解决了梁单元因偏心连接而对组合结构总体刚度矩阵的贡献问题, 并编制了求解板梁组合结构静强度计算问题的有限元程序。实例计算表明不但两种计算方法的计算结果吻合, 而且其计算结果均与有限元分析软件ANSYS 9.0计算结果接近, 位移误差在1%以内, 应力误差在2%以内, 分析表明二者均是处理板梁偏心连接组合结构的有效方法。Abstract: In order to deal with the eccentric connection problems of plate and beam reasonably in the structural analysis of vehicle, the constraint equations to the correlative nodes of plate and beam were involved in their balance equations, based on the theories of penalty element method and Lagrange multiplier method, which can solve the contribution problem of the eccentric connection to unitary stiffness matrix.A finite element program was worked out to solve the static intensity calculation problem of composite structure.Numerical computation result shows that the results of the two methods are both close to those obtained by finite element software ANSYS 9.0, the maximum errors of displacement and stress are respectively less than 1% and 2%, it indicates that the two methods are effective on dealing with the composite structure of plate and beam.
-
表 1 求解结果比较
Table 1. Comparison of analysis results
方法 v/mm u/mm w/mm θx/rad θy/rad 当量应力/MPa 罚单元法 -0.529 57×10-2 0.665 27×10-3 -1.509 7 -0.229 71×10-1 0.235 61×10-2 414.61 Lagrange法 -0.529 58×10-2 0.665 27×10-3 -1.509 7 -0.229 71×10-1 0.235 61×10-2 414.75 ANSYS 9.0 -0.525 39×10-2 0.690 55×10-3 -1.511 0 -0.229 89×10-1 0.237 47×10-2 409.52 
下载: 导出CSV
-
[1] 姚曙光, 许平. 高速磁浮列车国产化[J]. 交通运输工程学报, 2004, 4(2): 40-44. doi: 10.3321/j.issn:1671-1637.2004.02.010Yao Shu-guang, Xu Ping. Chinese components of high-speed maglev train body[J]. Journal of Traffic and Transportation Engineering, 2004, 4(2): 40-44. (in Chinese) doi: 10.3321/j.issn:1671-1637.2004.02.010 [2] 朱合华, 缪圆冰. 组合结构有限元计算存在的问题和处理方法[J]. 岩土力学, 2005, 26(9): 1437-1442. doi: 10.3969/j.issn.1000-7598.2005.09.018Zhu He-hua, Miao Yuan-bing. Problems in calculating composite structure with FEM and their counter measures[J]. Rock and Soil Mechanics, 2005, 26(9): 1 437-1 442. (in Chinese) doi: 10.3969/j.issn.1000-7598.2005.09.018 [3] 姚曙光. 板梁组合结构的I-deas软件有限元建模研究[J]. 机车电传动, 2000, 29(6): 22-24. doi: 10.3969/j.issn.1000-128X.2000.06.007Yao Shu-guang. Modeling study on sheet-beam unit construction with I-deas finite element[J]. Electric Drive for Locomotive, 2000, 29(6): 22-24. (in Chinese) doi: 10.3969/j.issn.1000-128X.2000.06.007 [4] 彭祖洋. 板梁组合结构的有限元分析[J]. 管理与技术, 2001, 16(4): 20-22. https://www.cnki.com.cn/Article/CJFDTOTAL-XDKD200502009.htmPeng Zu-yang. Finite element analysis of composite structures of beam and plate[J]. Management and Technology, 2001, 16(4): 20-22. (in Chinese) https://www.cnki.com.cn/Article/CJFDTOTAL-XDKD200502009.htm [5] 彭国伦. Fortran 95程序设计[M]. 北京: 中国电力出版社, 2002. [6] 孙苗钟. 处理板梁组合结构连接的一种方法[J]. 天津轻工业学院学报, 1998, 13(1): 30-36. https://www.cnki.com.cn/Article/CJFDTOTAL-TQYX801.006.htmSun Miao-zhong. A method of treating the link of plate-beam composite elastic structures[J]. Journal of Tianjin Institute of Light Industry, 1998, 13(1): 30-36. (in Chinese) https://www.cnki.com.cn/Article/CJFDTOTAL-TQYX801.006.htm [7] 曲圣年. 组合结构有限元分析的罚单元法[J]. 固体力学学报, 1982, 3(4): 555-559. https://www.cnki.com.cn/Article/CJFDTOTAL-GTLX198204007.htmQu Sheng-nian. Penalty element method in finite element analysis for composite structures[J]. Act Mechanic Solid Sinic, 1982, 3(4): 555-559. (in Chinese) https://www.cnki.com.cn/Article/CJFDTOTAL-GTLX198204007.htm [8] Bathe K J. Finite Element Procedures[M]. New Jersey: Prentice Hall, Englewood Cliffs, 1996. [9] 袁锦根. 用平面元和杆系元耦合方法计算框支剪力墙[J]. 工业建筑, 1998, 35(8): 21-24. https://www.cnki.com.cn/Article/CJFDTOTAL-GYJZ808.005.htmYuan Jin-gen. Calculation of column supported shear-wall stress using combination method of plan element and bar element[J]. Industrial Architecture, 1998, 35(8): 21-24. (in Chinese) https://www.cnki.com.cn/Article/CJFDTOTAL-GYJZ808.005.htm [10] 龙志飞, 岑松. 有限元法新论原理程序进展[M]. 北京: 中国水利水电出版社, 2001. [11] 姚松, 田红旗. DKQ弯曲单元的构造及应用[J]. 交通运输工程学报, 2006, 6(1): 16-19. http://transport.chd.edu.cn/article/id/200601003Yao Song, Tian Hong-qi. Construction and application of DKQ bending element[J]. Journal of Traffic and Transportation Engineering, 2006, 6(1): 16-19. (in Chinese) http://transport.chd.edu.cn/article/id/200601003 [12] 谢贻权, 何福保. 弹性和塑性力学中的有限单元法[M]. 北京: 机械工业出版社, 1981. [13] 傅永华. 关于偏心梁单元刚度矩阵的几点说明[J]. 力学与实践, 1996, 18(2): 65-67. https://www.cnki.com.cn/Article/CJFDTOTAL-LXYS602.024.htmFu Yong-hua. Some explanation about rigid matrix of eccentric beam[J]. Mechanics and Practice, 1996, 18(2): 65-67. (in Chinese) https://www.cnki.com.cn/Article/CJFDTOTAL-LXYS602.024.htm [14] 朱恒伟, 杨光松, 方赤峰. 组合结构罚有限元分析与罚因子的影响[J]. 固体力学学报, 1996, 17(1): 77-80. https://www.cnki.com.cn/Article/CJFDTOTAL-GTLX601.010.htmZhu Heng-wei, Yang Guang-song, Fang Chi-feng. Selection of penalty factor of penalty element method in finite element analysis for composite structures[J]. Act Mechanic Solid Sinic, 1996, 17(1): 77-80. (in Chinese) https://www.cnki.com.cn/Article/CJFDTOTAL-GTLX601.010.htm -
点击查看大图
图(5) / 表(1)
计量
- 文章访问数: 232
- HTML全文浏览量: 85
- PDF下载量: 273
- 被引次数: 0
