-
摘要: 在考虑传力杆松动量的基础上, 建立了重复荷载作用下刚性路面传力杆接缝模型, 提出了以第一传荷状态临界荷载为特征的传荷能力评价指标和方法, 研究了荷载大小、荷载作用位置及传力杆松动量对传力杆接缝传荷能力的影响, 分析了重复荷载作用下弯沉传荷系数指标的适用性, 并与考虑传力杆松动量的接缝传荷能力指标进行了对比研究。发现重复荷载作用下, 接缝两侧的荷载-弯沉关系曲线具有分段线性的特征, 存在多级传荷状态临界荷载, 实测与计算第一传荷状态临界荷载误差仅为4.2%;重复荷载作用4×104次后, 弯沉传荷系数变化范围为57.3%~71.5%, 而考虑传力杆松动量的传荷能力为0~51.9%。结果表明考虑松动量影响的传力杆接缝力学模型是可靠的, 以第一传荷状态临界荷载为特征的传荷能力评价指标和方法, 能够反映刚性路面传力杆接缝的实际传荷状况, 是评价其传荷能力的有效方法。Abstract: Based on considering dowel loosened quantity, a doweled joint model of rigid pavement under repetitive loading was formed, a new method figured by the first critical load of load-transfered condition was put forward to evaluate load-transfered capacity at joint, the effect of load size, load position and dowel loosened quantity on joint load-transfered capacity was studied, the applicability of existing load-transfered index figured by direct deflection ratio under repetitive loading was analyzed, and compared with that of new load-transfered index which took dowel loosened quantity into consideration.It is found that the relationship between load and deflection near joint under repetitive loading is subsection linear character, there exists several levels of critical loads, the error between field test load and calculated first critical load in load-transfered condition is only 4.2%;direct deflection ratio changes from 57.3% to 71.5%, and load-transfered capacity with dowel loosened quantity changes from 0 to 51.9% after 4×104 times repetitive loading.Analysis result shows that the model is reliable, the new method can actually reflect the load-transfered status of doweled joint in rigid pavement under repetitive loading.
-
表 1 路面参数
Table 1. Pavement parameters
混凝土板参数 尺寸/ (cm·cm) 板厚H/cm 弹性模量Ec/MPa 支承模量Bk/MPa 泊松比μc 180×200 20 3.4×104 1.6×104 0.15 传力杆与接缝参数 布型 直径D/cm 弹性模量Ed/MPa 泊松比μd 缝宽b/cm 30 cm×6根 2.0 2.1×105 0.30 1.5 地基参数 计算模量Es/MPa 泊松比μs 180 0.35 荷载作用面积(作用于缝边板中) / (cm·cm) 25.0×25.0 
下载: 导出CSV
表 2 各级荷载作用下的计算弯沉、传荷能力及各级临界荷载
Table 2. Calculated deflections, load-transfered coefficients and critical loads under different load levels
荷载P/kN 中心板计算弯沉W1/cm 边板计算弯沉W2/cm 式(3) 弯沉传荷系数EW/% 式(9) EW/% 临界荷载PLi/kN 0 0 0 — — 传力杆不传递荷载 5 0.002 81 0.001 61 57.3 0 10 0.005 61 0.003 22 57.3 0 15 0.008 42 0.004 83 57.4 0 PL1=15.634#传力杆开始传荷 20 0.011 01 0.006 66 60.5 14.6 25 0.013 56 0.008 54 63.0 25.7 PL2≈PL3=24.253#、5#传力杆开始传荷 30 0.016 00 0.010 51 65.7 34.1 35 0.018 45 0.012 48 67.6 40.3 PL4≈PL5=37.132#、6#传力杆开始传荷 40 0.020 89 0.014 46 69.2 45.0 45 0.023 32 0.016 44 70.5 48.8 50 0.025 76 0.018 43 71.5 51.9 1#、7#传力杆始终不传荷
下载: 导出CSV
-
[1] 刘晓曦, 王硕太. 机场混凝土道面封缝材料疲劳特性[J]. 交通运输工程学报, 2006, 6(1): 44-47. http://transport.chd.edu.cn/article/id/200601009Liu Xiao-xi, Wang Shuo-tai. Joint sealant fatigue property of airport concrete pavement[J]. Journal of Traffic and Transportation Engineering, 2006, 6(1): 44-47. (in Chinese) http://transport.chd.edu.cn/article/id/200601009 [2] 武建民, 伍石生. 用三维有限元方法评价带接缝的旧水泥混凝土路面罩面[J]. 长安大学学报: 自然科学版, 2002, 22(1): 10-13. https://www.cnki.com.cn/Article/CJFDTOTAL-XAGL200201002.htmWu Jian-min, Wu Shi-sheng. Evaluating of overlay on cement concrete slab with joints by 3D FEM[J]. Journal of Chang'an University: Natural Science Edition, 2002, 22(1): 10-13. (in Chinese) https://www.cnki.com.cn/Article/CJFDTOTAL-XAGL200201002.htm [3] 唐伯明. 路面结构状况的评价与分析[D]. 南京: 东南大学, 1990. [4] 邓学钧, 陈荣生. 刚性路面设计[M]. 北京: 人民交通出版社, 1990. [5] 周德云, 姚祖康. 水泥混凝土路面接缝传荷能力的分析[J]. 同济大学学报: 自然科学版, 1993, 21(1): 57-65. https://www.cnki.com.cn/Article/CJFDTOTAL-TJDZ199301016.htmZhou De-yun, Yao Zu-kang. Analysis of load transfer at joints in concrete pavements[J]. Journal of Tongji University: Natural Science Edition, 1993, 21(1): 57-65. (in Chinese) https://www.cnki.com.cn/Article/CJFDTOTAL-TJDZ199301016.htm [6] Guo Hua, Sherwood J A, Shyder M B. Component dowel-bar model for load-transfer system in PCC pavements[J]. Journal of Transportation Engineering, 1995, 121(3): 289-298. doi: 10.1061/(ASCE)0733-947X(1995)121:3(289) [7] Teller L W. Performance of doweled joints under repetitive loading[J]. Public Roads, 1958, 30(1): 1-23. [8] 赵佳军. 水泥混凝土路面接缝性能研究[D]. 南京: 东南大学, 1991. [9] 张宁, 黄晓明. 重复荷载下传力杆接缝运行特性[J]. 东南大学学报: 自然科学版, 1998, 28(2): 89-95. https://www.cnki.com.cn/Article/CJFDTOTAL-DNDX802.016.htmZhang Ning, Huang Xiao-ming. Analysis of doweled joints under repetitive loading[J]. Journal of Southeast University: Natural Science Edition, 1998, 28(2): 89-95. (in Chinese) https://www.cnki.com.cn/Article/CJFDTOTAL-DNDX802.016.htm [10] 张宁, 钱振东, 黄卫. 水泥混凝土路面板下地基脱空状况的评定与分析[J]. 公路交通科技, 2004, 21(1): 4-7. https://www.cnki.com.cn/Article/CJFDTOTAL-GLJK200401002.htmZhang Ning, Qian Zhen-dong, Huang Wei. Void detection under PCC pavement[J]. Journal of Highway and Transportation Research and Development, 2004, 21(1): 4-7. (in Chinese) https://www.cnki.com.cn/Article/CJFDTOTAL-GLJK200401002.htm [11] 交通部水泥混凝土路面推广组. 水泥混凝土路面研究[M]. 北京: 人民交通出版社, 1992. [12] 王陶. 基于遗传算法的刚性路面脱空判定[J]. 中国公路学报, 2003, 16(3): 23-26. https://www.cnki.com.cn/Article/CJFDTOTAL-ZGGL200303006.htmWang Tao. Void identifying of rigid pavement based on genetic algorithm[J]. China Journal of Highway and Transport, 2003, 16(3): 23-26. (in Chinese) https://www.cnki.com.cn/Article/CJFDTOTAL-ZGGL200303006.htm [13] 查旭东. 基于同伦方法的路面模量反算的研究[D]. 西安: 长安大学, 2001. [14] 赵彤, 甘耀清, 高农. 刚性路面接缝效能分析中一个重要公式的适用范围[J]. 哈尔滨建筑大学学报, 1998, 31(2): 109-114. https://www.cnki.com.cn/Article/CJFDTOTAL-HEBJ802.018.htmZhao Tong, Gan Yao-qing, Gao Nong. The conditions of using a formula in load transfer analysis for rigid pavement joints[J]. Journal of Harbin University of Civil Engineering and Architecture, 1998, 31(2): 109-114. (in Chinese) https://www.cnki.com.cn/Article/CJFDTOTAL-HEBJ802.018.htm -
点击查看大图
图(4) / 表(2)
计量
- 文章访问数: 335
- HTML全文浏览量: 119
- PDF下载量: 325
- 被引次数: 0
