-
摘要: 为了提高超限运输检测的精度, 提出了车辆装载几何参数超限识别方法。应用2个激光测距传感器分别扫描通过车辆, 得到不完整的端部轮廓以及各点坐标值, 根据左轮廓最小横坐标、右轮廓最大横坐标与两轮廓的最小纵坐标, 计算了车辆装载宽度和高度, 再经过轮廓合成, 得到完整的正投影, 应用光幕和光电开关构成的复合基准点判定装载长度, 并与载货汽车运输超限判定标准比较。现场测试结果表明: 检测误差在±3%的范围内, 可以实时存储通过车辆身份, 因此, 识别方法精度较高, 检测结果直观。Abstract: In order to improve the precision of inspecting oversize transportation, identifying method of geometry parameters for oversize vehicle was proposed. Vehicle was scanned by using two laser measurement sensors respectively to acquire the half outlines of vehicle and the coordinates of all inspecting points, the height and width of vehicle were computed according to the minimum abscissa of left outline, the maximal abscissa of right outline and the minimum ordinate of two outlines, the whole outline of vehicle was gained by using outline synthetic method, vehicle length was identified according to the datum marks consisted of light curtain and light-electricity switch and was compared with the standard of oversize transportation. Computation result shows that inspecting error is within ±3%, vehicle license is stored in time, so the precision of the method is higher, and inspecting result is intuitionistic.
-
表 1 系统测试结果
Table 1. Testing results of system
-
[1] 蔡凤田, 韩国庆, 王祝鹏. 超载运输对汽车燃料经济性及排放性能的影响[J]. 公路交通科技, 2004, 21(9): 131-135. https://www.cnki.com.cn/Article/CJFDTOTAL-GLJK200409034.htmCai Feng-tian, Han Guo-qing, Wang Zhu-peng. The effects of overloading on fuel consumption and emission of motor vehicle[J]. Journal of Highway and Transportation Research and Development, 2004, 21(9): 131-135. (in Chinese) https://www.cnki.com.cn/Article/CJFDTOTAL-GLJK200409034.htm [2] 张红卫, 王文龙. 车辆超限、超载与公路运输安全性分析[J]. 公路交通科技, 2004, 21(3): 132-136. https://www.cnki.com.cn/Article/CJFDTOTAL-GLJK200403035.htmZhang Hong-wei, Wang Wen-long. Safty analysis of oversize and overloadin road transport[J]. Journal of Highway and Transportation Research and Development, 2004, 21(3): 132-136. (in Chinese) https://www.cnki.com.cn/Article/CJFDTOTAL-GLJK200403035.htm [3] 李万恒. 浅谈超载运输对公路桥梁的危害[J]. 公路交通科技, 2004, 21(4): 130-132. doi: 10.3969/j.issn.1002-0268.2004.04.036Li Wan-heng. Discussion on highway bridge damage caused by overload[J]. Journal of Highway and Transportation Research and Development, 2004, 21(4): 130-132. (in Chinese) doi: 10.3969/j.issn.1002-0268.2004.04.036 [4] 宗雪梅, 胡大琳, 高军. 桥梁超重荷载与限载标准的确定[J]. 长安大学学报: 自然科学版, 2008, 28(1): 61-65. doi: 10.3969/j.issn.1671-6248.2008.01.013Zong Xue-mei, Hu Da-lin, Gao Jun. Vehicle s overload and li miting load standard for bridge safety[J]. Journal of Chang an University: Natural Science Edition, 2008, 28(1): 61-65. (in Chinese) doi: 10.3969/j.issn.1671-6248.2008.01.013 [5] 曾凡奇, 黄晓明. 超载对沥青路面的影响[J]. 交通运输工程学报, 2004, 4(3): 8-10. doi: 10.3321/j.issn:1671-1637.2004.03.003Zeng Fan-qi, Huang Xiao-ming. Asphalt pavement stress under overloading[J]. Journal of Traffic and Transportation Engineering, 2004, 4(3): 8-10. (in Chinese) doi: 10.3321/j.issn:1671-1637.2004.03.003 [6] 王国清, 胡国盛. 计重收费的理论与实践探索[J]. 公路交通科技, 2001, 18(1): 91-93. https://www.cnki.com.cn/Article/CJFDTOTAL-GLJK200101024.htmWang Guo-qing, Hu Guo-sheng. Study on loading based tollcollection theory and practice[J]. Journal of Highway and Transportation Research and Development, 2001, 18(1): 91-93. (in Chinese) https://www.cnki.com.cn/Article/CJFDTOTAL-GLJK200101024.htm [7] 王健伟, 马0, 杨铭. 收费公路计重定价理论模型[J]. 中国公路学报, 2004, 17(3): 98-101. https://www.cnki.com.cn/Article/CJFDTOTAL-ZGGL200403020.htmWang Jian-wei, Ma Jian, Yang Ming. Pricing theory model on toll-by-weight turnpike[J]. China Journal of Highway and Transport, 2004, 17(3): 98-101. (in Chinese) https://www.cnki.com.cn/Article/CJFDTOTAL-ZGGL200403020.htm [8] 陈荫三. 运用经济杠杆长效治理超载超限运输[J]. 中国公路学报, 2004, 17(2): 94-99. https://www.cnki.com.cn/Article/CJFDTOTAL-ZGGL200402021.htmChen Yin-san. Long-term effective solution to the overload transportation with economic lever[J]. China Journal of Highway and Transport, 2004, 17(2): 94-99. (in Chinese) https://www.cnki.com.cn/Article/CJFDTOTAL-ZGGL200402021.htm [9] 李忠奎, 荣朝和. 治理公路超载超限运输的长效机制和对策研究[J]. 中国公路学报, 2005, 18(4): 96-99. https://www.cnki.com.cn/Article/CJFDTOTAL-ZGGL200504019.htmLi Zhong-kui, Rong Chao-he. Research onlong-termsolution mechanism and counter-measure to overload and oversize transportation of highway[J]. China Journal of Highway and Transport, 2005, 18(4): 96-99. (in Chinese) https://www.cnki.com.cn/Article/CJFDTOTAL-ZGGL200504019.htm [10] Casavant K, Lenzi J. An economic evaluation of the fee and fine structure for overloaded trucks in Washington[J]. Transportation Quarterly, 1993, 47(2): 281-294. [11] Mohammadi J. Statistical evaluation of truck overloads[J]. Transportation England, 1992, 118(5): 651-665. [12] 熊军, 仲思东, 毛庆洲. 利用测量光幕检测货物列车端部超限[J]. 铁道车辆, 2005, 43(11): 35-37. https://www.cnki.com.cn/Article/CJFDTOTAL-TDCL200511012.htmXiong Jun, Zhong Si-dong, Mao Qing-zhou. Inspection of out-of-gauge of freight train ends with the application of measurement light curtain[J]. Rolling Stock, 2005, 43(11): 35-37. (in Chinese) https://www.cnki.com.cn/Article/CJFDTOTAL-TDCL200511012.htm [13] 卞晓东, 张为公, 郭占军. 利用视觉伺服技术进行车辆尺寸测量的方法[J]. 汽车工程, 2004, 26(3): 341-344. https://www.cnki.com.cn/Article/CJFDTOTAL-QCGC200403023.htmBian Xiao-dong, Zhang Wei-gong, Guo Zhan-jun. Vehicle dimensions measurement based on vision servoing technology[J]. Automotive Engineering, 2004, 26(3): 341-344. (in Chinese) https://www.cnki.com.cn/Article/CJFDTOTAL-QCGC200403023.htm -
下载:
点击查看大图
图(10) / 表(1)
计量
- 文章访问数: 432
- HTML全文浏览量: 163
- PDF下载量: 213
- 被引次数: 0
