留言板

尊敬的读者、作者、审稿人, 关于本刊的投稿、审稿、编辑和出版的任何问题, 您可以本页添加留言。我们将尽快给您答复。谢谢您的支持!

姓名
邮箱
手机号码
标题
留言内容
验证码

钢桥面铺装混合料三轴重复加载试验变形特性

杨军 朱浩然 崔娟

杨军, 朱浩然, 崔娟. 钢桥面铺装混合料三轴重复加载试验变形特性[J]. 交通运输工程学报, 2008, 8(6): 24-28.
引用本文: 杨军, 朱浩然, 崔娟. 钢桥面铺装混合料三轴重复加载试验变形特性[J]. 交通运输工程学报, 2008, 8(6): 24-28.
YANG Jun, ZHU Hao-ran, CUI Juan. Deformation properties of asphalt mixtures for steel bridge deck through repeated load triaxial test[J]. Journal of Traffic and Transportation Engineering, 2008, 8(6): 24-28.
Citation: YANG Jun, ZHU Hao-ran, CUI Juan. Deformation properties of asphalt mixtures for steel bridge deck through repeated load triaxial test[J]. Journal of Traffic and Transportation Engineering, 2008, 8(6): 24-28.

钢桥面铺装混合料三轴重复加载试验变形特性

基金项目: 

教育部留学回国人员基金项目 6821001005

详细信息
    作者简介:

    杨军(1968-), 女, 江苏扬州人, 东南大学教授, 从事路面新材料和新工艺研究

  • 中图分类号: U414.1

Deformation properties of asphalt mixtures for steel bridge deck through repeated load triaxial test

More Information
  • 摘要: 为了研究钢桥面铺装材料的高温变形特性及其车辙预估方法, 针对MA及SMA两种钢桥面铺装混合料, 采用三轴重复加载试验评价其高温性能, 并根据试验结果, 通过多元线性回归得到材料的非线性计算模型参数, 使用ABAQUS有限元软件, 模拟三轴试验过程, 将计算变形与实测变形相比较。发现两种混合料高温变形发展规律以及对不同荷载条件的响应方式不同, SMA具有优异的高温抗变形能力; 有限元模拟的误差约为10%。分析结果表明: 采用三轴重复加载试验和多元线性回归确定材料的非线性计算模型参数的方法可靠, 模型参数可用于沥青桥面铺装的车辙变形预估。

     

  • 图  1  沥青混合料蠕变曲线

    Figure  1.  Creep curve of asphalt mixture

    Figure  2.  UTM

    图  3  SMA变形曲线

    Figure  3.  Deformation curves of SMA

    图  4  MA变形曲线

    Figure  4.  Deformation curves of MA

    图  5  SMA三轴重复加载蠕变试验结果

    Figure  5.  Result of repeated load triaxial test on SMA

    图  6  三轴重复加载试验的简化模型

    Figure  6.  Simplified model of repeated load triaxial test

    图  7  有限元简化模型

    Figure  7.  Simplified finite element model

    图  8  有限元方法计算竖向变形

    Figure  8.  Vertical deformations calculated by FEM

    图  9  计算及实测变形发展

    Figure  9.  Developments of calculated deformation and measured deformation

    表  1  粗集料性质

    Table  1.   Properties of coarse aggregate

    下载: 导出CSV

    表  2  细集料性质

    Table  2.   Properties of fine aggregate

    下载: 导出CSV

    表  3  SMA用改性沥青性能

    Table  3.   Properties of modified asphalt for SMA

    下载: 导出CSV

    表  4  MA用沥青性质

    Table  4.   Properties of asphalt for MA

    下载: 导出CSV

    表  5  SMA11配合比

    Table  5.   Mix proportion of SMA11

    下载: 导出CSV

    表  6  MA配合比

    Table  6.   Mix proportion of MA

    下载: 导出CSV

    表  7  材料参数

    Table  7.   Material parameters

    下载: 导出CSV

    表  8  变形计算值与实测值的比较

    Table  8.   Comparison of calculated deformation and measured deformation

    下载: 导出CSV
  • [1] 沈金安. 沥青与沥青混合料路用性能[M]. 北京: 人民交通出版社, 2001.
    [2] 陈忠达, 袁万杰, 薛航, 等. 沥青混合料高温性能评价指标[J]. 长安大学学报: 自然科学版, 2006, 26(5): 1-4. https://www.cnki.com.cn/Article/CJFDTOTAL-XAGL200605000.htm

    CHEN Zhong-da, YUAN Wan-jie, XUE Hang, et al. High temperature stability index of hot mixed asphalt[J]. Journal of Chang an University: Natural Science Edition, 2006, 26(5): 1-4. (in Chinese) https://www.cnki.com.cn/Article/CJFDTOTAL-XAGL200605000.htm
    [3] 岳学军, 黄晓明. 沥青混合料高温稳定性评价指标的试验研究[J]. 公路交通科技, 2006, 23(10): 37-40. https://www.cnki.com.cn/Article/CJFDTOTAL-GLJK200610008.htm

    YUE Xue-jun, HUANG Xiao-ming. Experi ment research on high-temperature deformation indexes of asphalt mixtures[J]. Journal of Highway and Transportation Research and Deve-lopment, 2006, 23(10): 37-40. (in Chinese) https://www.cnki.com.cn/Article/CJFDTOTAL-GLJK200610008.htm
    [4] BARKSDALE R D, MILLER J H. Development of equip-ment andtechniques for evaluatingfatigue and rutting charac-teristics of asphalt concrete mixes[R]. Atlanta: Georgia In-stitute of Technology, 1977.
    [5] KALOUSH K E. Si mple performance test for permanent de-formation of asphalt mixtures[D]. Tempe: Arizona State University, 2001.
    [6] 邓学钧. 中国江阴长江大桥桥面沥青铺装层高温稳定性[J]. 交通运输工程学报, 2002, 2(2): 1-7. http://transport.chd.edu.cn/article/id/200202001

    DENG Xue-jun. Asphalt pavement stability at high-tempera-ture for the Jiangyin bridge in China[J]. Journal of Traffic and Transportation Engineering, 2002, 2(2): 1-7. (in Chi-nese). http://transport.chd.edu.cn/article/id/200202001
    [7] 张祥, 李洪涛, 赵永军. 江阴长江公路大桥钢桥面铺装设计[J]. 铁道标准设计, 2005, 49(5): 68-71. https://www.cnki.com.cn/Article/CJFDTOTAL-TDBS20050500P.htm

    ZHANG Xiang, LI Hong-tao, ZHAO Yong-jun. Pavement design of Yangtze river highway bridge in Jiangyin[J]. Rail-way Standard Design, 2005, 49(5): 68-71. (in Chinese) https://www.cnki.com.cn/Article/CJFDTOTAL-TDBS20050500P.htm
    [8] 吴光蓉, 牟建波, 陈仕周, 等. 钢桥桥面铺装方案环道试验研究[J]. 公路, 2001, 46(1): 20-23. https://www.cnki.com.cn/Article/CJFDTOTAL-GLGL200101005.htm

    WU Guang-rong, MUJian-bo, CHENShi-zhou, et al. Study on circular track test of steel deck pavement scheme[J]. Highway, 2001, 46(1): 20-23. (in Chinese) https://www.cnki.com.cn/Article/CJFDTOTAL-GLGL200101005.htm
    [9] BROWN S F, COOPER K E. The Mechanical properties of bituminous materials for road bases and base courses[J]. Journal of the Association of Asphalt Paving Technologists, 1984, 53(4): 10-15. https://trid.trb.org/view/725969
    [10] 黄菲. 沥青路面永久变形数值模拟及车辙预估[D]. 南京: 东南大学, 2006.
  • 加载中
图(9) / 表(8)
计量
  • 文章访问数:  295
  • HTML全文浏览量:  106
  • PDF下载量:  517
  • 被引次数: 0
出版历程
  • 收稿日期:  2008-06-26
  • 刊出日期:  2008-12-25

目录

    /

    返回文章
    返回