-
摘要: 考虑车联网中待测节点的快速移动性及实现方式多样性等特点, 应用网络断层扫描技术, 设计并实现了一种面向车联网的无线网络试验床。试验床主要包括网络性能测量单元和测试区域上下游探测单元。用试验床测试了车联网中测试车快速移动对网络性能的影响。测试性能指标包括网络往返延迟、网络丢包率、网络平均吞吐率等。测试结果表明: 随车联网中测试车平均行程速度的增大, 无线网络性能指标呈下降趋势。当测试车平均行程速度达到70km·h-1以上时, 各项性能指标与20km·h-1时相比下降明显, 网络平均往返延迟增加约2.4倍, 丢包率提高约10倍, 网络平均吞吐率下降约2.6倍。可见, 试验床能够实现对车联网无线网络性能指标的有效测量和评估。Abstract: Considering the features of rapid mobility and realizing way diversity of tested nodes in the internet of vehicles, a wireless network testbed oriented internet of vehicles was designed and implemented by using network tomography technology.The testbed was composed of network performance measurement units and up-down stream detection units of testing area.The impact of rapid mobility of test vehicle on network performance was tested by designed testbed.The performance indexes were composed of round-trip delay, packet loss rate, average throughput, etc.in the network.Test result indicates that wireless network performance indexes degrade with the increase of the average speed of test vehicle in the internet of vehicles.When the average speed of test vehicle is more than 70 km·h-1, all performance indexes decrease significantly comparing to the situation of 20 km·h-1.Average network round-trip delay increases about 2.4 times, packet loss rate increases about 10 times, and average throughput decreases about 2.6 times.Obviously, the wireless network performance indexes of internet of vehicles are measured and evaluated effectively by the designed wireless network testbed oriented internet of vehicles.
-
表 1 测试结果1
Table 1. Test result 1
表 2 测试结果2
Table 2. Test result 2
表 3 待测网络系统性能指标
Table 3. Performance indexes of tested network system
-
[1] 秦玲, 张剑飞, 郭鹏, 等. 浮动车交通信息采集与处理关键技术及其应用研究[J]. 交通运输系统工程与信息, 2007, 7 (1): 39-42. doi: 10.3969/j.issn.1009-6744.2007.01.006QIN Ling, ZHANG Jian-fei, GUO Peng, et al. Study of key technologies and applications of floating car traffic information collection and processing[J]. Journal of Transportation Systems Engineering and Information Technology, 2007, 7 (1): 39-42. (in Chinese). doi: 10.3969/j.issn.1009-6744.2007.01.006 [2] HARTENSTEIN H, LABERTEAUX K P. A tutorial survey on vehicular Ad Hoc networks[J]. IEEE Communications Magazine, 2008, 46 (6): 164-171. doi: 10.1109/MCOM.2008.4539481 [3] TURIN G L, JEWELL W S, JOHNSTON T L. Simulation of urban vehicle-monitoring systems[J]. IEEE Transactions on Vehicular Technology, 1972, 21 (1): 9-16. doi: 10.1109/T-VT.1972.23493 [4] 廖惜春, 丘敏, 麦汉荣. 无线传感网络中多普勒效应的研究与仿真[J]. 传感技术学报, 2007, 20 (12): 2674-2678. doi: 10.3969/j.issn.1004-1699.2007.12.029LIAO Xi-chun, QIU Min, MAI Han-rong. The research and simulation of doppler effect in wireless sensors networks[J]. Chinese Journal of Sensors and Actuators, 2007, 20 (12): 2674-2678. (in Chinese). doi: 10.3969/j.issn.1004-1699.2007.12.029 [5] LEVIS P, LEE N, WELSH M, et al. TOSSIM: accurate and scalable simulation of entire TinyOS applications[C]//ACM. Proceedings of the 1st International Conference on Embedded Networked Sensor Systems. New York: ACM, 2003: 126-137. [6] SUNDRESH S, KIM W, AGHA G. SENS: a sensor, environment and network simulator[C]//IEEE. Proceedings of the 37th Annual Simulation Symposium. Washington DC: IEEE, 2004: 221-228. [7] WERNER-ALLEN G, SWIESKOWSKI P, WELSH M. MoteLab: a wireless sensor network testbed[C]//IEEE. Proceedings of the 4th International Symposium on Information Processing in Sensor Networks. Piscataway: IEEE, 2005: 483-488. [8] HANDZISKI V, KOPKE A, WILLIG A, et al. TWIST: a scalable and reconfigurable testbed for wireless indoor experiments with sensor networks[C]//ACM. Proceedings of the 2nd International Workshop on Multi-hop Ad Hoc Networks: from Theory to Reality. Florence: ACM, 2006: 63-70. [9] ERTIN E, ARORA A, RAMNATH R, et al. Kansei: a high-fidelity sensing testbed[J]. IEEE Internet Computing, 2006, 10 (2): 35-47. doi: 10.1109/MIC.2006.37 [10] 王建军, 秦振海. ZigBee无线个人区域网技术在汽车网络的应用[J]. 汽车电器, 2012 (6): 70-72. https://www.cnki.com.cn/Article/CJFDTOTAL-QCDQ201206032.htmWANG Jian-jun, QIN Zhen-hai. Application of ZigBee personal wireless LAN in vehicle network[J]. Auto Electric Parts, 2012 (6): 70-72. (in Chinese). https://www.cnki.com.cn/Article/CJFDTOTAL-QCDQ201206032.htm [11] 常促宇, 向勇, 史美林. 车载自组网的现状与发展[J]. 通信学报, 2007, 28 (11): 116-126. https://www.cnki.com.cn/Article/CJFDTOTAL-TXXB200711019.htmCHANG Cu-yu, XIANG Yong, SHI Mei-lin. Development and status of vehicular ad hoc networks[J]. Journal on Communications, 2007, 28 (11): 116-126. (in Chinese). https://www.cnki.com.cn/Article/CJFDTOTAL-TXXB200711019.htm [12] DU Ying-tian, ZHANG Lin, FENG Yu-fei, et al. Performance analysis and enhancement of IEEE 802.11p/l609 protocol family in vehicular environments[C]//IEEE. Proceedings of the 13th International IEEE Conference on Intelligent Transportation Systems. Piscataway: IEEE, 2010: 1085-1090. [13] 汪成亮, 张晨. 面向车联网的交通流参数检测[J]. 计算机工程与应用, 2012, 48 (23): 212-218. https://www.cnki.com.cn/Article/CJFDTOTAL-JSGG201223048.htmWANG Cheng-liang, ZHANG Chen. Detection model of traffic flow parameters oriented internet of vehicles[J]. Computer Engineering and Applications, 2012, 48 (23): 212-218. (in Chinese). https://www.cnki.com.cn/Article/CJFDTOTAL-JSGG201223048.htm [14] 王伟, 蔡皖东, 田广利, 等. Ad Hoc网络性能测量分析[J]. 计算机科学, 2007, 34 (1): 71-73, 91. https://www.cnki.com.cn/Article/CJFDTOTAL-JSJA200701019.htmWANG Wei, CAI Wan-dong, TIAN Guang-li, et al. Analysis of the ad hoc network performance measurement[J]. Computer Science, 2007, 34 (1): 71-73, 91. (in Chinese). https://www.cnki.com.cn/Article/CJFDTOTAL-JSJA200701019.htm [15] 刘宏伟, 李成. ISO/IEC 18000-6C简析[J]. 信息技术与标准化, 2007 (7): 17-20. https://www.cnki.com.cn/Article/CJFDTOTAL-DZBZ200707007.htmLIU Hong-wei, LI Cheng. ISO/IEC 18000-6Csketch and analyse[J]. Information Technology and Standardization, 2007 (7): 17-20. (in Chinese). https://www.cnki.com.cn/Article/CJFDTOTAL-DZBZ200707007.htm [16] 李贵山, 蔡皖东. 网络断层扫描技术的研究与发展[J]. 测控技术, 2008, 27 (2): 1-4. https://www.cnki.com.cn/Article/CJFDTOTAL-IKJS200802000.htmLI Gui-shan, CAI Wan-dong. Research and development of network tomography[J]. Measurement and Control Technology, 2008, 27 (2): 1-4. (in Chinese). https://www.cnki.com.cn/Article/CJFDTOTAL-IKJS200802000.htm [17] 胡振涛, 刘先省. 基于相对距离的一种多传感器数据融合方法[J]. 系统工程与电子技术, 2006, 28 (2): 196-198. https://www.cnki.com.cn/Article/CJFDTOTAL-XTYD200602009.htmHU Zhen-tao, LIU Xian-xing. Method of multi-sensor data fusion based on relative distance[J]. Systems Engineering and Electronics, 2006, 28 (2): 196-198. (in Chinese). https://www.cnki.com.cn/Article/CJFDTOTAL-XTYD200602009.htm [18] 康军, 戴冠中. 基于网络QoS的网络化控制系统保性能控制[J]. 控制与决策, 2009, 24 (7): 973-978, 984. https://www.cnki.com.cn/Article/CJFDTOTAL-KZYC200907003.htmKANG Jun, DAI Guan-zhong. Design of guaranteed cost controller of networked control systems based on QoS[J]. Control and Decision, 2009, 24 (7): 973-978, 984. (in Chinese). https://www.cnki.com.cn/Article/CJFDTOTAL-KZYC200907003.htm