温拌沥青混合料的压实特性与难易系数

延西利; 陈四来; 安舒文; 李昂; 张青

温拌沥青混合料的压实特性与难易系数

延西利^{1, 2,},
陈四来³,
安舒文¹,
李昂¹,
张青¹

1.
长安大学公路学院, 陕西西安 710064
2.
国立公共工程学院土工材料实验室, 罗纳里昂 69120
3.
四川俄岗公路工程建设有限责任公司, 四川成都 610041

基金项目:

四川省交通科技项目 2011A7-4-1

四川省交通科技项目 2012B1-1

国家自然科学基金项目 51308064

详细信息

作者简介:
延西利(1963-), 男, 陕西绥德人, 长安大学教授, 工学博士, 从事路面材料研究

中图分类号: U414.1
计量
- 文章访问数: 1293
- HTML全文浏览量: 129
- PDF下载量: 746
- 被引次数: 0
出版历程
- 收稿日期: 2016-11-15
- 刊出日期: 2017-02-25

Compaction characteristic and operability factor of warm bituminous mixture

1.
School of Highway, Chang'an University, Xi'an 710064, Shaanxi, China
2.
Laboratoire des Géomatériaux, Ecole Nationale des Travaux Publics de l'Etat, Lyon 69120, Rhône, France
3.
Sichuan E-gang RoadEngineering Construction Co., Ltd., Chengdu 610041, Sichuan, China

More Information

Author Bio:
YANXi-li(1963-), male, professor, PhD, +86-29-82334434, xili.yan@chd.edu.cn

摘要

摘要: 为了研究温拌沥青混合料的压实性能及其可压实的难易程度, 选用3种同品牌温拌沥青(ACMP1、ACMP2与ACMP3) 和2种热拌沥青(70^#基质沥青与SBS改性沥青), 制备了AC-13C型沥青混合料, 采用马歇尔击实试验, 变化不同的击实次数和击实温度, 测试了马歇尔试件的压实度和稳定度, 分析了其变化规律, 建立了压实度与击实次数的指数回归关系, 引入了压实成长曲率因子, 定义了压实难易系数。试验结果表明: 沥青混合料的压实度随着击实次数的增加而呈指数增长, 初期增长较快, 后期较慢, 且最终趋于稳定; 在击实温度为90℃¹50℃的范围内, 压实度随着击实温度的升高呈线性增长; 马歇尔稳定度随压实度增大呈线性增长变化, 符合传统研究结果; 温拌沥青混合料的压实难易系数比热拌沥青混合料降低了13.5%~18.5%, 具有较小的压实难易系数, 更容易压实。
- 路面材料 /
- 沥青混合料 /
- 压实度 /
- 击实温度 /
- 击实次数 /
- 难易系数
Abstract: To study the compaction characteristics and compaction operability of warm bituminous mixture, AC-13 C mixtures were made based on 3types of warm mix bitumens with the same brand (ACMP1, ACMP2 and ACMP3) and 2kinds of hot mix bitumens (70 ^# base bitumen and SBS modified bitumen).The compactness and stability of each Marshall specimen were measured by Marshall compaction test, their change rules were analyzed in different initial compaction temperatures and times, and the exponential regression relationship between compactness and compaction times was proposed.The curvature factor on compaction growing was applied and the operability factor was defined to evaluate the compaction workability.Test result shows that the compactness of bituminous mixture increases exponentially with the increase of compaction times, increases faster in the early stage, slows in the late stage, and stabilizes finally.The compactness increases linearly with the increase of initial compaction temperature within 90 ℃-150 ℃.Marshall stability increases linearly with the increase of compactness in accordance with traditional research results.The operability factor of warm bituminous mixture decreases by13.5%-18.5% compared with hot bituminous mixture, so it is easier to be compacted.
- pavement material /
- bituminous mixture /
- compactness /
- compaction temperature /
- compaction times /
- operability factor

HTML全文

图 1 沥青混合料的三相体系

Figure 1. Three-phase system of bituminous mixture

下载: 全尺寸图片幻灯片

图 2 沥青针入度与温度的关系

Figure 2. Relationship between asphalt penetration and temperature

下载: 全尺寸图片幻灯片

图 3 压实度与击实温度的关系

Figure 3. Relationships between compactness and compaction temperature

下载: 全尺寸图片幻灯片

图 4 稳定度与击实温度的关系

Figure 4. Relationships between stability and compaction temperature

下载: 全尺寸图片幻灯片

图 5 稳定度与压实度的关系

Figure 5. Relationships between stability and compactness

下载: 全尺寸图片幻灯片

图 6 压实度与击实次数的关系

Figure 6. Relationships between compactness and compaction times

下载: 全尺寸图片幻灯片

图 7 曲线的边界条件和几何特性

Figure 7. Limit conditions and geometric properties of curves

下载: 全尺寸图片幻灯片

表 1 ACMP沥青的基本组成与物理性状

Table 1. Basic compositions and physical properties of ACMP bitumens

下载: 导出CSV

表 2 沥青的技术性能指标

Table 2. Technical feature indexes of bitumens

下载: 导出CSV

表 3 矿料级配组成与密度

Table 3. Gradation compositions and densities of mineral aggregates

下载: 导出CSV

表 4 沥青混合料的真密度

Table 4. Real densities of bituminous mixtures

下载: 导出CSV

表 5 变击实次数时沥青混合料的试验温度

Table 5. Test temperatures of bituminous mixtures under changing compaction times

下载: 导出CSV

表 6 不同击实温度下的压实度和稳定度

Table 6. Compactness and stability under different compaction temperatures

下载: 导出CSV

表 7 不同击实次数下的压实度计算值

Table 7. Computational values of compactness under different compaction times

下载: 导出CSV

表 8 数值回归结果

Table 8. Result of numerical regression

下载: 导出CSV

表 9 难易系数的计算结果

Table 9. Calculational result of operability factor

下载: 导出CSV

参考文献(27)

[1]	GHABCHI R, SINGH D, ZAMAN M. Laboratory evaluation of stiffness, low-temperature cracking, rutting, moisture damage and fatigue performance of WMA mixes[J]. Road Materials and Pavement Design, 2015, 16 (2): 334-357. doi: 10.1080/14680629.2014.1000943
[2]	郭乃胜, 尤占平, 赵颖华, 等. 温拌再生沥青混合料耐久性能[J]. 中国公路学报, 2014, 27 (8): 17-22. https://www.cnki.com.cn/Article/CJFDTOTAL-ZGGL201408004.htm GUO Nai-sheng, YOU Zhan-ping, ZHAO Ying-hua, et al. Durability of warm mix asphalt containing recycled asphalt mixtures[J]. China Journal of Highway and Transport, 2014, 27 (8): 17-22. (in Chinese). https://www.cnki.com.cn/Article/CJFDTOTAL-ZGGL201408004.htm
[3]	YAN Xi-li. Comportement mécanique des enrobés au bitume et au bitume-polymère-application de l'essai triaxial de révolution[D]. Lyon: Ecole Nationale des Travaux Publics de l'Etat, 1992.
[4]	延西利, 吕嵩巍, 常小马. 沥青混合料的压实性能研究[J]. 西安公路交通大学学报, 1996, 16 (1): 1-3. https://www.cnki.com.cn/Article/CJFDTOTAL-XAGL601.000.htm YAN Xi-li, LU Song-wei, CHANG Xiao-ma. Study on compacting behaviour of bituminous mixtures[J]. Journal of Xi'an Highway University, 1996, 16 (1): 1-3. (in Chinese). https://www.cnki.com.cn/Article/CJFDTOTAL-XAGL601.000.htm
[5]	BIJLEVELD F R, MILLER S R, DE BONDT A H, et al. Aligning laboratory and field compaction practices for asphalt-the influence of compaction temperature on mechanical properties[J]. International Journal of Pavement Engineering, 2016, 17 (8): 727-740. doi: 10.1080/10298436.2015.1019494
[6]	胡涛. 沥青混合料压实特性分析[D]. 西安: 长安大学, 2012. HU Tao. Study on asphalt mixture compaction characteristics[D]. Xi'an: Chang'an University, 2012. (in Chinese).
[7]	李宇峙, 杨瑞华, 邵腊庚, 等. 沥青混合料压实特性分析[J]. 公路交通科技, 2005, 22 (3): 28-30, 34. https://www.cnki.com.cn/Article/CJFDTOTAL-GLJK200503008.htm LI Yu-zhi, YANG Rui-hua, SHAO La-geng, et al. Compactness analysis of asphalt mixture[J]. Journal of Highway and Transportation Research and Development, 2005, 22 (3): 28-30, 34. (in Chinese). https://www.cnki.com.cn/Article/CJFDTOTAL-GLJK200503008.htm
[8]	张争奇, 袁迎捷, 王秉纲. 沥青混合料旋转压实密实曲线信息及其应用[J]. 中国公路学报, 2005, 18 (3): 1-6. ZHANG Zheng-qi, YUAN Ying-jie, WANG Bing-gang. Information of gyratory compaction densification curve of asphalt mixture and its application[J]. China Journal of Highway and Transport, 2005, 18 (3): 1-6. (in Chinese).
[9]	李立寒, 李新军, 钟陟鑫. 沥青混合料压实特性的影响因素分析[J]. 中国公路学报, 2001, 14 (增): 31-34, 38. https://www.cnki.com.cn/Article/CJFDTOTAL-ZGGL2001S1008.htm LI Li-han, LI Xin-jun, ZHONG Zhi-xin. Analysis of factors effecting on densification characteristics of hot mix asphalt[J]. China Journal of Highway and Transport, 2001, 14 (S): 31-34, 38. (in Chinese). https://www.cnki.com.cn/Article/CJFDTOTAL-ZGGL2001S1008.htm
[10]	蒋玮, 沙爱民, 裴建中, 等. 多孔沥青混合料旋转压实特性[J]. 长安大学学报: 自然科学版, 2010, 30 (5): 11-16. https://www.cnki.com.cn/Article/CJFDTOTAL-XAGL201005005.htm JIANG Wei, SHA Ai-min, PEI Jian-zhong, et al. Gyratory compaction characteristics of porous asphalt concrete[J]. Journal of Chang'an University: Natural Science Edition, 2010, 30 (5): 11-16. (in Chinese). https://www.cnki.com.cn/Article/CJFDTOTAL-XAGL201005005.htm
[11]	苗春泽. 沥青混合料体积参数及体积设计方法研究[D]. 成都: 西南交通大学, 2006. MIAO Chun-ze. The study on volume parameters and volume design of asphalt mixture[D]. Chengdu: Southwest Jiaotong University, 2006. (in Chinese).
[12]	KUMAR S A, SARVANAN U, KRISHNAN J M, et al. Rheological characterization of modified binders at mixing and compaction temperature[J]. International Journal of Pavement Engineering, 2014, 15 (9): 767-785. doi: 10.1080/10298436.2013.851792
[13]	鲁正兰, 孙立军, 孙希瑾. 成型温度对沥青混合料体积参数的影响分析[J]. 同济大学学报: 自然科学版, 2006, 34 (2): 186-190. https://www.cnki.com.cn/Article/CJFDTOTAL-TJDZ200602008.htm LU Zheng-lan, SUN Li-jun, SUN Xi-jin. Influence analysis of shaping temperature on the volume parameters of asphalt mixture[J]. Journal of Tongji University: Natural Science, 2006, 34 (2): 186-190. (in Chinese). https://www.cnki.com.cn/Article/CJFDTOTAL-TJDZ200602008.htm
[14]	徐东, 章玮. Sasobit再生沥青混合料的设计与性能[J]. 长安大学学报: 自然科学版, 2015, 35 (3): 13-20. https://www.cnki.com.cn/Article/CJFDTOTAL-XAGL201503004.htm XU Dong, ZHANG We. Design and performance of Sasobit warm mixed reclaimed asphalt mixture[J]. Journal of Chang'an University: Natural Science Edition, 2015, 35 (3): 13-20. (in Chinese). https://www.cnki.com.cn/Article/CJFDTOTAL-XAGL201503004.htm
[15]	PLATI C, GEORGIOU P, LOIZOS A. Influence of different roller compaction modes on asphalt mix performance[J]. International Journal of Pavement Engineering, 2015, 17 (1): 64-70.
[16]	赵可, 李海骢. 改性沥青感温性评价指标的讨论[J]. 中国公路学报, 2000, 13 (4): 1-7. https://www.cnki.com.cn/Article/CJFDTOTAL-ZGGL200004000.htm ZHAO Ke, LI Hai-cong. Discussion of the temperature susceptibility indexes of modified asphalt[J]. China Journal of Highway and Transport, 2000, 13 (4): 1-7. (in Chinese). https://www.cnki.com.cn/Article/CJFDTOTAL-ZGGL200004000.htm
[17]	魏建国, 王兆仑, 付其林. 温拌沥青混合料施工温度确定方法[J]. 长安大学学报: 自然科学版, 2013, 33 (6): 16-21. https://www.cnki.com.cn/Article/CJFDTOTAL-XAGL201306004.htm WEI Jian-guo, WANG Zhao-lun, FU Qi-lin. Determination method of warm mix asphalt mixture construction temperature[J]. Journal of Chang'an University: Natural Science Edition, 2013, 33 (6): 16-21. (in Chinese). https://www.cnki.com.cn/Article/CJFDTOTAL-XAGL201306004.htm
[18]	左锋, 叶奋. 国外温拌沥青混合料技术与性能评价[J]. 中外公路, 2007, 27 (6): 164-168. https://www.cnki.com.cn/Article/CJFDTOTAL-GWGL200706045.htm ZUO Feng, YE Fen. Technology and performance evaluation about foreign warm mix asphalt[J]. Journal of China and Foreign Highway, 2007, 27 (6): 164-168. (in Chinese). https://www.cnki.com.cn/Article/CJFDTOTAL-GWGL200706045.htm
[19]	李宁利, 李铁虎, 陈华鑫, 等. 改性沥青混合料的拌和与压实温度[J]. 中国公路学报, 2007, 20 (2): 40-44. https://www.cnki.com.cn/Article/CJFDTOTAL-ZGGL200702007.htm LI Ning-li, LI Tie-hu, CHEN Hua-xin, et al. Mixing and compaction temperatures of modified asphalt mixture[J]. China Journal of Highway and Transport, 2007, 20 (2): 40-44. (in Chinese). https://www.cnki.com.cn/Article/CJFDTOTAL-ZGGL200702007.htm
[20]	DI BÉNÉDETTO H, NGUYEN Q T, SAUZÉAT C. Nonlinearity, heating, fatigue and thixotropy during cyclic loading of asphalt mixtures[J]. Road Materials and Pavement Design, 2011, 12 (1): 129-158. doi: 10.1080/14680629.2011.9690356
[21]	安舒文. 热拌和温拌沥青混合料的马歇尔击实性能研究[D]. 西安: 长安大学, 2014. AN Shu-wen. Research on Marshall compaction properties of hot mix asphalt and warm mix asphalt[D]. Xi'an: Chang'an University, 2014. (in Chinese).
[22]	杜鹏. ACMP温拌沥青混合料的路用性能研究[D]. 西安: 长安大学, 2014. DU Peng. The study of the performance of ACMP warm mix asphalt[D]. Xi'an: Chang'an University, 2014. (in Chinese).
[23]	延西利, 雍黎明, 延梦璐, 等. ACMP沥青温拌性能的黏温曲线分析[J]. 中国公路学报, 2015, 28 (8): 1-7. https://www.cnki.com.cn/Article/CJFDTOTAL-ZGGL201508002.htm YAN Xi-li, YONG Li-ming, YAN Meng-lu, et al. Analysis of viscosity-temperature curve about warm mix property of ACMP bitumen[J]. China Journal of Highway and Transport, 2015, 28 (8): 1-7. (in Chinese). https://www.cnki.com.cn/Article/CJFDTOTAL-ZGGL201508002.htm
[24]	延西利, 梁春雨, 艾涛, 等. 基于沥青与石料界面剪切的黏塑性流变模型研究[J]. 土木工程学报, 2014, 47 (2): 136-144. https://www.cnki.com.cn/Article/CJFDTOTAL-TMGC201402018.htm YAN Xi-li, LIANG Chun-yu, AI Tao, et al. Study on the visco-plastic model of the interfacial shear between bitumen and stone[J]. China Civil Engineering Journal, 2014, 47 (2): 136-144. (in Chinese). https://www.cnki.com.cn/Article/CJFDTOTAL-TMGC201402018.htm
[25]	张琛, 汪海年, 尤占平, 等. 橡胶沥青混合料和易性与压实特性的相关性[J]. 东南大学学报: 自然科学版, 2016, 46 (1): 202-208. https://www.cnki.com.cn/Article/CJFDTOTAL-DNDX201601033.htm ZHANG Chen, WANG Hai-nian, YOU Zhan-ping, et al. Correlation between workability and compaction property of rubber asphalt mixture[J]. Journal of Southeast University: Natural Science Edition, 2016, 46 (1): 202-208. (in Chinese). https://www.cnki.com.cn/Article/CJFDTOTAL-DNDX201601033.htm
[26]	延西利, 田辉黎, 延喜乐, 等. 沥青混合料的变速拌和功率测试与拌和流变模型[J]. 交通运输工程学报, 2016, 16 (3): 1-7. doi: 10.19818/j.cnki.1671-1637.2019.06.003 YAN Xi-li, TIAN Hui-li, YAN Xi-le, et al. Mixing power measurement at different mixing velocities and mixing rheological model of bituminous mixture[J]. Journal of Traffic and Transportation Engineering, 2016, 16 (3): 1-7. (in Chinese). doi: 10.19818/j.cnki.1671-1637.2019.06.003
[27]	裴建中, 邢向阳. 温拌沥青混合料施工技术研究[J]. 筑路机械与施工机械化, 2010, 27 (3): 41-44. https://www.cnki.com.cn/Article/CJFDTOTAL-ZLJX201003022.htm PEI Jian-zhong, XING Xiang-yang. Study on construction technology of warm mix asphalt[J]. Road Machinery and Construction Mechanization, 2010, 27 (3): 41-44. (in Chinese). https://www.cnki.com.cn/Article/CJFDTOTAL-ZLJX201003022.htm