Influence of backfilling construction on mechanical performance for soil-covered corrugated steel arch bridge
-
摘要: 根据有限元软件和内蒙古某座拱桥参数, 用beam3二维梁单元模拟波纹钢板, 用plan42二维实体单元模拟回填土体, 建立了考虑回填高度与拱圈相互作用的平面模型, 计算了不同回填高度下的拱圈弯矩和轴力, 分析了回填高度对拱圈应力和变形的影响。计算结果表明: 在对称回填施工过程中, 拱圈最大径向绝对位移约为0.9 mm, 拱圈最大、最小应力分别约为10-、27 MPa; 在不对称回填施工过程中, 拱圈最大径向绝对位移约为1.4 mm, 拱圈最大、最小应力分别约为12、-18 MPa, 且最大径向绝对位移和最大应力均出现在拱圈右侧的1/8跨度附近。在回填施工过程中, 应重点监控拱圈右侧1/8跨度附近拱圈的应力和变形。Abstract: On the basis of finite element software and the parameters of arch bridge in Inner Mongolia, 2D beam element beam3 was used to simulate corrugated steel, 2D solid element plan42 was used to simulate backfilling soil, and a plane model based on the interaction between backfilling height and arch ring was set up. The bending moments and axial forces of arch ring under different backfilling heights were calculated, and the influence of backfilling height on the stress and deformation of arch ring was analyzed. Calculation result shows that during symmetric backfilling construction process, the maximum radial absolute displacement of arch ring is about 0.9 mm, and the maximum and minimum stresses of arch ring are about 10, -27 MPa respectively. During asymmetric backfilling construction process, the maximum radial absolute displacement of arch ring is about 1.4 mm, the maximum and minimum stresses of arch ring are about 12, -18 MPa respectively, and the maximum radial absolute displacement and the maximum stress appear at 1/8 span on the right of arch ring. During backfilling construction process, the stress and displacement at 1/8 span on the right of arch ring must be mainly monitored.
-
图 12 基准回填高度为2.2 m时的拱圈最大应力
Figure 12. Maximum stresses of arch ring while standard backfilling height is 2.2 m
图 13 基准回填高度为2.2 m时的拱圈最小应力
Figure 13. Minimum stresses of arch ring while standard backfilling height is 2.2 m
图 14 基准回填高度为2.5 m时的拱圈最大应力
Figure 14. Maximum stresses of arch ring while standard backfilling height is 2.5 m
图 15 基准回填高度为2.5 m时的拱圈最小应力
Figure 15. Minimum stresses of arch ring while standard backfilling height is 2.5 m
表 1 回填高度
Table 1. Backfilling heights
施工阶段 1 2 3 4 5 6 7 回填高度/m 0.4 0.7 1.0 1.3 1.6 1.9 2.2 施工阶段 8 9 10 11 12 13 14 回填高度/m 2.5 2.8 3.1 3.4 3.7 4.0 4.3 
下载: 导出CSV
-
[1] 白义松, 高伟, 李洪峰. 波纹钢管涵洞在公路工程中的应用研究[J]. 森林工程, 2008, 24 (2): 28-30. doi: 10.3969/j.issn.1001-005X.2008.02.009BAI Yi-song, GAO Wei, LI Hong-feng. Application research of corrugated steel pipe culvert in highway engineering[J]. Forest Engineering, 2008, 24 (2): 28-30. (in Chinese) doi: 10.3969/j.issn.1001-005X.2008.02.009 [2] 刘戈, 符进, 章金钊. 多年冻土地区金属波纹管涵设计[J]. 公路, 2008 (9): 315-318. https://www.cnki.com.cn/Article/CJFDTOTAL-GLGL200809070.htmLIU Ge, FU Jin, ZHANG Jin-zhao. Design of corrugated metal culvert in the region of frozen soil[J]. Highway, 2008 (9): 315-318. (in Chinese) https://www.cnki.com.cn/Article/CJFDTOTAL-GLGL200809070.htm [3] 王军刚, 刘强. 钢波纹管涵在山区高速公路中的应用[J]. 中外公路, 2009, 29 (2): 165-168. https://www.cnki.com.cn/Article/CJFDTOTAL-GWGL200902050.htmWANG Jun-gang, LIU Qiang. Application of corrugated steel culvert in highway of mountain area[J]. Journal of China and Foreign Highway, 2009, 29 (2): 165-168. (in Chinese) https://www.cnki.com.cn/Article/CJFDTOTAL-GWGL200902050.htm [4] WEBB MC. I mproved design and construction of large-span culverts[D]. Amherst: University of Massachusetts, 1999. [5] FLENER E B, KAROUMI R, SUNDQUIST H. Field testing of a long-span arch steel culvert during backfilling and in service[J]. Structure and Infrastructure Engineering, 2005, 1 (3): 181-188. doi: 10.1080/00222930500030929 [6] FLENER E B. Soil-steel interaction of long-span box culvertsperformance during backfilling[J]. Journal of Geotechnicaland Geoenvironmental Engineering, 2010, 136 (6): 823-832. doi: 10.1061/(ASCE)GT.1943-5606.0000287 [7] MANKO Z Z, BEBEN D. Tests during three stages of construction of a road bridge with a flexible load-carrying structure made of super cor type steel corrugated plates interacting with soil[J]. Journal of Bridge Engineering, 2005, 10 (5): 570-591. doi: 10.1061/(ASCE)1084-0702(2005)10:5(570) [8] MANKO Z Z, BEBEN D. Research on steel shell of a road bridge made of corrugated plates during backfilling[J]. Journal of Bridge Engineering, 2005, 10 (5): 592-603. doi: 10.1061/(ASCE)1084-0702(2005)10:5(592) [9] 黄豪, 赵雷鸣, 邹志强, 等. 高填方涵洞分层回填的数值模拟和土压力分析[J]. 交通与计算机, 2008, 26 (1): 96-98. https://www.cnki.com.cn/Article/CJFDTOTAL-JTJS200801026.htmHUANG Hao, ZHAO Lei-ming, ZOU Zhi-qiang, et al. Numerical si mulation and earth pressure analysis of backfilling in layers for high embankment culvert[J]. Computer and Communications, 2008, 26 (1): 96-98. (in Chinese) https://www.cnki.com.cn/Article/CJFDTOTAL-JTJS200801026.htm [10] 罗炜华, 刘樟富, 何晓峰, 等. 基于施工过程的沟埋式刚性矩形涵洞位移场试验研究与有限元分析[J]. 中国西部科技, 2010, 9 (4): 1-5. doi: 10.3969/j.issn.1671-6396.2010.04.001LUO Wei-hua, LI U Zhang-fu, HE Xiao-feng, et al. Experi-mental study and numerical si mulation on displacement field of rectangular trench-buried culverts based on construction process[J]. Science and Technology of West China, 2010, 9 (4): 1-5. (in Chinese) doi: 10.3969/j.issn.1671-6396.2010.04.001 [11] 徐群丽, 季文玉. 青藏线波纹管涵洞现场试验及理论分析[J]. 中国铁道科学, 2006, 27 (6): 55-59. doi: 10.3321/j.issn:1001-4632.2006.06.011XU Qun-li, JI Wen-yu. Field test and theoretical analysis of corrugated pipe culvert on Qinghai-Tibet Railway[J]. China Railway Science, 2006, 27 (6): 55-59. (in Chinese) doi: 10.3321/j.issn:1001-4632.2006.06.011 [12] 张峰. 覆土波纹钢板拱桥模型试验和有限元分析[D]. 北京: 北京交通大学, 2008.ZHANG Feng. Experi mental study and finite element analysis of a tested buried corrugated steel arch bridge[D]. Beijing: Beijing Jiaotong University, 2008. (in Chinese) [13] CAN/CSA-S6-00, Canadian highway bridge design code[S]. [14] 范鹤, 付春辉, 范泽. 考虑不同填土参数的高填土涵洞土压力分布研究[J]. 北方交通, 2008 (10): 31-34. doi: 10.3969/j.issn.1673-6052.2008.10.013FAN He, FU Chun-hui, FAN Ze. Research on earth pressure distribution of high earth fill culvert under different parameter of earth filling[J]. Northern Communications, 2008 (10): 31-34. (in Chinese) doi: 10.3969/j.issn.1673-6052.2008.10.013 [15] 刘保东, 尹航, 冯芝茂, 等. 基于土-钢共同作用模型的覆土波纹钢板拱桥施工过程受力分析[J]. 北京交通大学学报, 2009, 33 (4): 65-68. https://www.cnki.com.cn/Article/CJFDTOTAL-BFJT200904016.htmLIU Bao-dong, YIN Hang, FENG Zhi-mao, et al. Mechanics behavior of buried corrugated steel arch bridge based on soilsteel interaction mode during construction[J]. Journal of Beijing Jiaotong University, 2009, 33 (4): 65-68. (in Chinese) https://www.cnki.com.cn/Article/CJFDTOTAL-BFJT200904016.htm [16] 黄豪, 赵雷鸣, 邹志强, 等. 高填方下卵形拱涵的土压力分析与结构内力计算[J]. 华中科技大学学报: 城市科学版, 2008, 25 (2): 74-77. https://www.cnki.com.cn/Article/CJFDTOTAL-WHCJ200802017.htmHUANG Hao, ZHAO Lei-ming, ZOU Zhi-qiang, et al. Earth pressure analysis of the egg-shaped arch culvert and computation of internal force under high filling[J]. Journal of Huazhong University of Science and Technology: Urban Science Edition, 2008, 25 (2): 74-77. (in Chinese) https://www.cnki.com.cn/Article/CJFDTOTAL-WHCJ200802017.htm -
点击查看大图
图(15) / 表(1)
计量
- 文章访问数: 956
- HTML全文浏览量: 133
- PDF下载量: 518
- 被引次数: 0
