[1] |
CUI Chang-lin, SUN Jun, HE Zhi-xian, et al. Systematical analysis method for the mechanical behaviors of crankshaftbearing system[J]. Journal of Tribology, 2017, 139 (2): 021702-1-9. doi: 10.1115/1.4033362
|
[2] |
刘成, 吕延军, 李莎, 等. 表面织构对曲轴轴承润滑性能的影响[J]. 交通运输工程学报, 2017, 17 (3): 65-74. doi: 10.3969/j.issn.1671-1637.2017.03.007LIU Cheng, LU Yan-jun, LI Sha, et al. Effect of surface texture on tribological performance of crankshaft bearing[J]. Journal of Traffic and Transportation Engineering, 2017, 17 (3): 65-74. (in Chinese). doi: 10.3969/j.issn.1671-1637.2017.03.007
|
[3] |
HE Zhen-peng, ZHANG Jun-hong, ZHANG Gui-chang, et al. Crankshaft-bearing evolution indexes investigation and asperity contact identification based on neural network[J]. Applied Mathematical Modelling, 2014, 38 (2): 506-523. doi: 10.1016/j.apm.2013.06.042
|
[4] |
SUN Jun, SHU Lei, SONG Xian-hao, et al. Multi-objective optimization design of engine crankshaft bearing[J]. Industrial Lubrication and Tribology, 2016, 68 (1): 86-91. doi: 10.1108/ILT-03-2015-0040
|
[5] |
WANG Li-gang, CAO Deng-qing, HUANG Wen-hu. Nonlinear coupled dynamics of flexible blade-rotor-bearing systems[J]. Tribology International, 2010, 43 (4): 759-778. doi: 10.1016/j.triboint.2009.10.016
|
[6] |
DE CASTRO H F, CAVALCA K L, NORDMANN R. Whirl and whip instabilities in rotor-bearing system considering a nonlinear force model[J]. Journal of Sound and Vibration, 2008, 317 (1/2): 273-293.
|
[7] |
XIE Wen-hui, TANG You-gang, CHEN Yu-shu. Analysis of motion stability of the flexible rotor-bearing system with two unbalanced disks[J]. Journal of Sound and Vibration, 2008, 310 (1/2): 381-393.
|
[8] |
JING Jian-ping, MENG Guang, SUN Yi, et al. On the nonlinear dynamic behavior of a rotor-bearing system[J]. Journal of Sound and Vibration, 2004, 274 (3-5): 1031-1044. doi: 10.1016/S0022-460X(03)00663-1
|
[9] |
WANG Jun-guo, ZHOU Jian-zhong, DONG Da-wei, et al. Nonlinear dynamic analysis of a rub-impact rotor supported by oil film bearings[J]. Archive of Applied Mechanics, 2013, 83 (3): 413-430. doi: 10.1007/s00419-012-0688-3
|
[10] |
LI De-xin, XU Jian-xue. A method to determine the periodic solution of the non-linear dynamics system[J]. Journal of Sound and Vibration, 2004, 275 (1/2): 1-16.
|
[11] |
CHANGJIAN Cai-wan. Non-linear dynamic analysis of dual flexible rotors supported by long journal bearings[J]. Mechanism and Machine Theory, 2010, 45 (6): 844-866. doi: 10.1016/j.mechmachtheory.2009.11.010
|
[12] |
XIAO Zhong-hui, WANG Li-ping, ZHENG Tie-sheng. An efficient algorithm for fluid force and its Jacobian matrix in journal bearing[J]. Journal of Tribology, 2006, 128 (2): 291-295. doi: 10.1115/1.2162559
|
[13] |
LU Y J, LIU H, DAI R, et al. A method for determining the periodic solution and its stability of non-linear bearingrotor system based on observed states of the system[J]. Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology, 2009, 223 (2): 137-149. doi: 10.1243/13506501JET457
|
[14] |
HEI Di, LU Yan-jun, ZHANG Yong-fang, et al. Nonlinear dynamic behaviors of a rod fastening rotor supported by fixedtilting pad journal bearings[J]. Chaos, Solitons and Fractals, 2014, 69: 129-150. doi: 10.1016/j.chaos.2014.09.013
|
[15] |
HIRANI H, ATHRE K, BISWAS S. Dynamically loaded finite length journal bearings: analytical method of solution[J]. Journal of Tribology, 1999, 121 (4): 844-852. doi: 10.1115/1.2834144
|
[16] |
MERUANE V, PASCUAL R. Identification of nonlinear dynamic coefficients in plain journal bearings[J]. Tribology International, 2008, 41 (8): 743-754. doi: 10.1016/j.triboint.2008.01.002
|
[17] |
BASTANI Y, DE QUEIROZ M. A new analytic approximation for the hydrodynamic forces in finite-length journal bearings[J]. Journal of Tribology, 2010, 132 (1): 014502-1-9. doi: 10.1115/1.4000389
|
[18] |
WANG Y L, LIU Z S, KANG W J, et al. Approximate analytical model for fluid film force of finite length plain journal bearing[J]. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 2012, 226 (5): 1345-1355. doi: 10.1177/0954406211418302
|
[19] |
VIGNOLO G G, BARILD O, QUINZANI L M. Approximate analytical solution to Reynolds equation for finite length journal bearings[J]. Tribology International, 2011, 44 (10): 1089-1099. doi: 10.1016/j.triboint.2011.03.020
|
[20] |
CHASALEVRIS A. Finite length floating ring bearings: operational characteristics using analytical methods[J]. Tribology International, 2016, 94: 571-590. doi: 10.1016/j.triboint.2015.10.016
|
[21] |
SFYRIS D, CHASALEVRIS A. An exact analytical solution of the Reynolds equation for the finite journal bearing lubrication[J]. Tribology International, 2012, 55: 46-58. doi: 10.1016/j.triboint.2012.05.013
|
[22] |
ZHANG Yong-fang, WU Peng, GUO Bo, et al. Approximate solution of oil film load-carrying capacity of turbulent journal bearing with couple stress flow[J]. Chinese Journal of Mechanical Engineering, 2015, 28 (1): 106-114. doi: 10.3901/CJME.2014.1118.170
|
[23] |
GONG Ru-zhi, LI De-you, WANG Hong-jie, et al. Analytical solution of Reynolds equation under dynamic conditions[J]. Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology, 2016, 230 (4): 416-427. doi: 10.1177/1350650115604654
|
[24] |
ZHANG Yong-fang, HEI Di, LIU Cheng, et al. An approximate solution of oil film forces of turbulent finite length journal bearing[J]. Tribology International, 2014, 74: 110-120. doi: 10.1016/j.triboint.2014.02.015
|
[25] |
张永芳, 刘成, 李莎, 等. 基于混合遗传算法的径向滑动轴承表面织构优化[J]. 交通运输工程学报, 2017, 17 (3): 90-98. doi: 10.3969/j.issn.1671-1637.2017.03.010ZHANG Yong-fang, LIU Cheng, LI Sha, et al. Surface texture optimization of journal bearing based on hybrid genetic algorithm[J]. Journal of Traffic and Transportation Engineering, 2017, 17 (3): 90-98. (in Chinese). doi: 10.3969/j.issn.1671-1637.2017.03.010
|