Research progress and engineering application of long lasting high performance weathering steel bridges
-
摘要: 系统归纳与剖析了国内外耐候钢桥的研究新进展及工程应用情况, 总结了稳定耐候锈层的形成机制、选材标准、腐蚀与疲劳损伤机理、耐候构造、耐候螺栓研发以及锈层检测与评价技术等方面的关键科技成果, 梳理并完善了耐候钢桥的适用范围和腐蚀余量设计指标, 提出了耐候钢桥锈层稳定化处理及施工技术要点; 评析了耐候钢桥锈层损伤检测与评价技术、腐蚀损伤养管技术, 结合美、日耐候钢桥工程事故经验教训和中国首批长寿命高性能耐候钢桥建设技术创新成果, 探讨了该领域的技术创新方向。研究结果表明: 耐候锈层由外层的γ-FeOOH、α-FeOOH以及内层的非晶态FeOOH化合物与Fe3O4构成, 稳定耐候锈层能否形成与保持, 主要受氯离子、积水和积尘等因素的影响; 建议编制中国高性能耐候钢桥选材区划图谱, 完善稳定耐候锈层构造设计准则; 现代耐候钢桥具有高性能和长寿命的技术特征, 带锈层构造细节的面内应力疲劳、面外变形疲劳试验和数值断裂力学模拟, 以及耐候高强螺栓长期耐损性能研究的推进, 将为建立完善的耐腐蚀、抗疲劳设计准则奠定基础; 人工智能技术的应用将推动长寿命高性能耐候钢桥智能运维技术的重大进步; 应加大研发投入, 建立具有中国自主知识产权的长寿命高性能耐候钢桥设计、建造和运维标准规范体系, 培养高素质的工程技术人才, 推进交通强国建设。Abstract: The new research progress and engineering application of weathering steel bridges at home and abroad were systematically generalized and analyzed. The key scientific and technological achievements in the fields of formation mechanism of stable corrosion-resistant patina, material selection standard, corrosion and fatigue damage mechanism, research and development of corrosion-resistant configuration and weathering bolt, and detection and evaluation technology of patina were summarized. The application scope and corrosion allowance design indexes of weathering steel bridges were combed and improved, and the key points of stabilization treatment and construction technology for the patina of weathering steel bridges were proposed. The damage detection and evaluation technology and corrosion damage maintenance and management technology of patina in weathering steel bridges were evaluated and analyzed. Combined with the experience and lessons of weathering steel bridge engineering accidents in the United States and Japan, as well as the construction technological innovation achievements of the first batch of long lasting high performance weathering steel bridges in China, the technological innovation direction in this field was discussed. Research result shows that the composition of corrosion-resistant patina contains the outer layer of γ-FeOOH and α-FeOOH, and the inner layer of amorphous FeOOH compound and Fe3O4. The formation and durability of stable corrosion-resistant patina are mainly affected by the factors such as chloride ion, accumulated water and dust. The material selection zoning map of high performance weathering steel bridges in China is suggested to establish, and the configuration design criterion of stable corrosion-resistant patina should be improved. The modern weathering steel bridge has the technical characteristics of high performance and long lasting. The in-plane stress fatigue, out-of-plane deformation fatigue test, numerical fracture mechanics simulation of configuration details with patina and the research on the long-term damage resistance of weathering high-strength bolts should be promoted to lay the foundation for establishing a perfect design criterion of anti-corrosion and anti-fatigue. The application of artificial intelligence technology will promote the significant progress of intelligent management and maintenance technology of long lasting high performance weathering steel bridges. The investment for research and development should be increased, a specification system should be established for the design, construction and maintenance of long lasting high performance weathering steel bridges with independent intellectual property rights in China, the high-quality engineering and technical talents should be cultivated, thus to promot the development of Chinese strong transportation network.
-
图 2 HPS485W挂片试样腐蚀前后形貌对比
Figure 2. Aappearance comparison of HPS485W coupon specimen before and after corrosion
图 5 CVN夏比冲击试样的破坏形态与韧-脆转变温度曲线
Figure 5. Failure patterns of CVN Charpy impact specimens and ductile-brittle transition temperature curves
图 7 混合设计高强耐候钢工字梁抗弯性能试验
Figure 7. Bending performance test of high strength weathering steel Ⅰ-beam with hybrid design
图 8 遮蔽条件下焊接耐候钢梁下翼缘疲劳裂纹
Figure 8. Fatigue cracks on bottom flange of welded weathering steel girder under sheltered condition
图 9 面外变形疲劳试验装置与腹板间隙面外变形疲劳裂纹
Figure 9. Test device for out-of-plane deformation fatigue test and out-of-plane deformation fatigue cracks at web gaps
图 10 应力比和间隙尺寸对腹板间隙面外变形细节疲劳强度的影响
Figure 10. Influences of stress ratio and gap size on out-of-plane deformation fatigue strength of web gap details
图 11 JISF规范中规定的日本本土与冲绳地区适宜使用耐候钢的区域
Figure 11. Areas of Japan and Okinawa where suitable for weathering steel specified in JISF code
图 13 日本技术标准中建议的下翼缘构造
Figure 13. Bottom flange configuration proposed by Japan technical standards
图 23 排水措施不合理导致钢梁与混凝土桥台结合处局部锈蚀
Figure 23. Local corrosion at connection between steel girder and concrete abutment caused by unreasonable drainage facilities
图 24 未形成稳定锈层导致锈液流淌到墩台上
Figure 24. Patina fluid in unstable patina flowing onto pier and abutment
图 26 耐候钢表面锈层松散、片状脱落
Figure 26. Loosing and flaking of patina on weathering steel surface
图 27 腐蚀劣化的日本耐候钢桥
Figure 27. Corrosion and deterioration of weathering steel bridge in Japan
表 1 中国耐候钢桥
Table 1. Weathering steel bridges in China
桥名 桥梁用途 结构形式 跨径组成/m 涂装情况 主要构件材质 开通时间 京广铁路武汉巡司河桥 铁路桥 钢箱梁桥 3×19.3 钢梁免涂装 NHq35 1991 沈阳后丁香大桥 公路桥 钢箱梁桥 38+61+38、38+61+61+48、48+61+38 箱内免涂装 Q345qENH 2013 陕西眉县常兴二号桥 公路桥 管翼缘组合梁桥 54 全桥免涂装 下翼缘Q500qDNH, 其余Q345qDNH 2014 陕西黄延高速磨坊跨线桥(K16+322.607) 公路桥 钢板梁桥 2×28 全桥免涂装 下翼缘Q500qENH, 其余Q345qENH 2015 陕西黄延高速磨坊跨线桥(K18+496.141) 公路桥 管翼缘组合梁桥 2×28 全桥免涂装 下翼缘Q500qENH, 其余Q345qENH 2015 西藏墨脱达国大桥 公路桥 钢桁架悬索桥 81 主桁免涂装 Q345qDNH 2015 西藏墨脱西莫河大桥 公路桥 钢桁架悬索桥 126 主桁免涂装 Q345qDNH 2015 台州内环路立交桥 公路桥 钢箱梁桥 45~61 箱内免涂装 Q345qDNH 2017 拉林铁路藏木雅鲁藏布江大桥 铁路桥 中承式钢管混凝土提篮拱桥 430 桥面以上钢管拱免涂装 主钢管Q420qENH, 其余Q345qDNH 2019 官厅水库特大桥 公路桥 双塔单跨悬索桥 210+720+210 主桥加劲钢板梁免涂装 Q345qENH 2019 G109线改建工程跨柳忠高速高架桥 市政桥 钢管翼缘斜弯组合梁桥 51+61+51 全桥免涂装 下翼板Q500qENH, 其余Q345qENH 2020 
下载: 导出CSV
表 2 日本可使用耐候钢的地区
Table 2. Areas of Japan where weathering steel can be used
地区 与海岸线距离/km 日本海的沿海地区 Ⅰ > 20 Ⅱ > 5 太平洋海岸 > 2 濑户内海沿岸 > 1
下载: 导出CSV
表 3 EN ISO 9223—2012中的环境等级分类
Table 3. Classification of environmental grades in EN ISO 9223—2012
环境等级 环境特征 C1 仅室内环境 C2 大气中含有少量污染物, 多为农村地区 C3 含有中等SO2含量污染物的城市和工业环境, 含少量盐的海岸地区 C4 含有中等盐含量的工业和海岸地区 C5-I 湿度高、腐蚀较严重的工业地区 C5-M 盐含量较高的海岸及近海地区
下载: 导出CSV
表 4 BD 7/01—1981中规定的各环境等级下的腐蚀余量
Table 4. Corrosion allowances under each environmental grade in BD 7/01—1981
环境等级 腐蚀等级 腐蚀余量/mm C1、C2、C3 中级 1.0 C4、C5 严重 1.5 箱梁内部 0.5
下载: 导出CSV
表 5 德国、瑞典技术标准中建议的腐蚀余量
Table 5. Corrosion allowances recommended in Germany and Sweden techincal standards mm
环境等级 C2 C3 C4 德国标准 0.8 1.2 1.5 瑞典标准 0.6 1.2 1.7
下载: 导出CSV
表 6 tv的取值
Table 6. Values of tv
钢板厚度/mm EN 10029—1991中厚度允许容差分类下tv的取值/mm 类别A 类别B 类别C 类别D (5, 8] 0.05 0.15 0.45 -0.15 (8, 15] 0.10 0.25 0.60 -0.25 (15, 25] 0.15 0.45 0.75 -0.20 (25, 40] 0.25 0.75 1.05 -0.10 > 40 0.40 1.10 1.40 0.10
下载: 导出CSV
表 7 耐候钢最低预热温度建议值
Table 7. Recommended values of minimum preheating temperature for weathering steel
耐候钢牌号 不同接头最大板厚(mm)的最低预热温度建议值/℃ [20, 40] (40, 60] (60, 80] > 80 Q345qNH 50 80 100 Q420qNH 65 100 120 Q500qNH 80 100 120 150
下载: 导出CSV
表 8 日本耐候高强螺栓化学成分(F10TW级)
Table 8. Chemical compositions of weathering high-strength bolts in Japan(F10TW grade)
螺栓名称 C含量/% Si含量/% Mn含量/% P含量/% S含量/% Cr含量/% Ni含量/% Cu含量/% Mo含量/% Ti含量/% B含量/% I指数 KHB10W 0.20 0.30 0.80 0.010 0.010 0.80 0.55 0.43 0.10 ≤0.05 ≤0.003 6.97 NWB110 0.20~0.25 0.15~0.25 0.70~0.90 ≤0.03 ≤0.03 0.6~0.8 0.30~0.50 0.3~0.5 0.001~0.003 6.74 JFE 0.23 0.14 0.82 0.010 0.010 0.83 0.47 0.42 0.20 6.77 0.20~0.30 0.15~0.35 0.60~0.90 ≤0.03 ≤0.035 0.7~0.9 0.35~0.55 0.3~0.5 0.005~0.04 0.001~0.003 6.97 SNC22BA 0.20~0.25 0.10~0.20 0.70~0.90 ≤0.03 ≤0.03 0.7~0.9 0.30~0.60 0.3~0.6 0.003 6.55
下载: 导出CSV
表 9 日本耐候钢桥锈层外观评定分级
Table 9. Appearance classification of patina for weathering steel bridges in Japan
表 10 Iowa州交通厅建议的锈层量化分级标准
Table 10. Quantitative classification standard of patina recommended by Iowa Department of Transportation
-
[1] 王春生, 段兰, 朱经纬, 等. 创新型高性能钢桥与管翼缘组合梁桥研究[C]//陈艾荣, 阮欣. 第一届全国桥梁维护与安全学术会议论文集. 北京: 人民交通出版社, 2013: 157-176.WANG Chun-sheng, DUAN Lan, ZHU Jing-wei, et al. Research on innovative high performance steel bridge and tubular flange composite girder bridge[C]//CHEN Ai-rong, RUAN Xin. The First National Conference on Bridge Maintenance and Safety. Beijing: China Communications Press, 2013: 157-176. (in Chinese). [2] 刘玉擎, 陈艾荣. 耐候钢桥的发展及其设计要点[J]. 桥梁建设, 2003(5): 39-41, 45. doi: 10.3969/j.issn.1003-4722.2003.05.011LIU Yu-qing, CHEN Ai-rong. Development and design essentials of weathering steel bridges[J]. Bridge Construction, 2003(5): 39-41, 45. (in Chinese). doi: 10.3969/j.issn.1003-4722.2003.05.011 [3] ALBRECHT P, CHENG J G. Fatigue tests of 8-yr weathered A588 steel weldment[J]. Journal of Structural Engineering, 1983, 109(9): 2048-2065. doi: 10.1061/(ASCE)0733-9445(1983)109:9(2048) [4] ALBRECHT P, SIDANI M. Fatigue of eight-year weathered A588 steel stiffeners in salt water[J]. Journal of Structural Engineering, 1989, 115(7): 1756-1767. doi: 10.1061/(ASCE)0733-9445(1989)115:7(1756) [5] ALBRECHT P, LENWARI A. Fatigue strength of weathered A588 steel beams[J]. Journal of Bridge Engineering, 2009, 14(6): 436-443. doi: 10.1061/(ASCE)1084-0702(2009)14:6(436) [6] ALBRECHT P, COBURN S K, WATTAR F M, et al. Guidelines for the use of weathering steel in bridges (NCHRP 314)[R]. Washington DC: Transportation Research Board, 1989. [7] Federal Highway Administration. Uncoated weathering steel in structures[R]. Washington DC: Federal Highway Administration, 1989. [8] 王春生, 段兰, 王继明, 等. 基于混合设计的高性能钢梁抗弯性能及延性试验[J]. 中国公路学报, 2012, 25(2): 81-89. doi: 10.3969/j.issn.1001-7372.2012.02.014WANG Chun-sheng, DUAN Lan, WANG Ji-ming, et al. Bending behavior and ductility test of high performance steel beam based on hybrid design[J]. China Journal of Highway and Transport, 2012, 25(2): 81-89. (in Chinese). doi: 10.3969/j.issn.1001-7372.2012.02.014 [9] 王春生, 段兰, 郑丽, 等. 桥梁高性能钢HPS485W疲劳裂纹扩展速率试验研究[J]. 工程力学, 2013, 30(6): 212-216. https://www.cnki.com.cn/Article/CJFDTOTAL-GCLX201306033.htmWANG Chun-sheng, DUAN Lan, ZHENG Li, et al. Fatigue crack growth rate tests of high performance steel HPS485W for bridges[J]. Engineering Mechanics, 2013, 30(6): 212-216. (in Chinese). https://www.cnki.com.cn/Article/CJFDTOTAL-GCLX201306033.htm [10] 王春生, 段兰, 胡景雨, 等. 桥梁高性能钢HPS485W断裂韧性试验研究[J]. 工程力学, 2013, 30(8): 54-59. https://www.cnki.com.cn/Article/CJFDTOTAL-GCLX201308011.htmWANG Chun-sheng, DUAN Lan, HU Jing-yu, et al. Fracture and toughness tests study of high performance steel HPS485W for bridge engineering[J]. Engineering Mechanics, 2013, 30(8): 54-59. (in Chinese). https://www.cnki.com.cn/Article/CJFDTOTAL-GCLX201308011.htm [11] MISAWA T, ASAMI K, HASHIMOTO K, et al. The mechanism of atmospheric rusting and the protective amorphous rust on low alloy steel[J]. Corrosion Science, 1974, 5(20): 279-289. [12] 刘国超, 董俊华, 韩恩厚, 等. 耐候钢锈层研究进展[J]. 腐蚀科学与防护技术, 2006, 18(4): 268-272. doi: 10.3969/j.issn.1002-6495.2006.04.010LIU Guo-chao, DONG Jun-hua, HAN En-hou, et al. Progress in research on rust layer of weathering steel[J]. Corrosion Science and Protection Technology, 2006, 18(4): 268-272. (in Chinese). doi: 10.3969/j.issn.1002-6495.2006.04.010 [13] MORCILLO M, CHICO B, DÍAZ I, et al. Atmospheric corrosion data of weathering steels. A review[J]. Corrosion Science, 2013, 77: 6-24. doi: 10.1016/j.corsci.2013.08.021 [14] YANN H. Atmospheric corrosion study of weathering steel using sensor technology[D]. Boca Raton: Florida Atlantic University, 2007. [15] ZHANG Q C, WU J S, WANG J J, et al. Corrosion behavior of weathering steel in marine atmosphere[J]. Materials Chemistry and Physics, 2002, 77(2): 603-608. [16] CHEN Ai-hua, XU Jing-qiu, LI Ran, et al. Corrosion resistance of high performance weathering steel for bridge building applications[J]. Journal of Iron and Steel Research, 2012, 19(6): 59-63. doi: 10.1016/S1006-706X(12)60128-9 [17] OKADA H, HOSOI Y, YUKAWA K I, et al. Structure of the rust formed on low alloy steels in atmospheric corrosion[J]. Tetsu-to-Hagane, 2010, 55(5): 355-365. [18] MISAWA T, KYUNO T, SUËTAKA W, et al. The mechanism of atmospheric rusting and the effect of Cu and P on the rust formation of low alloy steels[J]. Corrosion Science, 1971, 11(1): 35-48. doi: 10.1016/S0010-938X(71)80072-0 [19] TOWNSEND H E, SIMPSON T C, JOHONSON G L. Structure of rust on weathering steel in rural and industrial environments[J]. Corrosion Science, 1994, 50(7): 546-554. doi: 10.5006/1.3294356 [20] YAMASHITA M, MIYUKI H, MATSUDA Y, et al. The long term growth of the protective rust layer formed on weathering steel by atmospheric corrosion during a quarter of a century[J]. Corrosion Science, 1994, 36(2): 283-299. doi: 10.1016/0010-938X(94)90158-9 [21] KATAYAMA H, YAMAMOTO M, KODAMA T. Degradation behavior of protective rust layer in chloride solution[J]. Corrosion Engineering, 2000, 49(1): 41-44. doi: 10.3323/jcorr1991.49.41 [22] CHOI Y S, KIM J G. Aqueous corrosion behavior of weathering steel and carbon steel in acid-chloride environments[J]. Corrosion, 2012, 56(12): 1202-1210. [23] DIAZ I, CANO H, CHICO B, et al. Some clarifications regarding literature on atmospheric corrosion of weathering steels[J]. International Journal of Corrosion, 2012, 2012: 1-9. [24] 张全成, 吴建生, 陈家光, 等. 暴露1年的耐大气腐蚀用钢表面锈层分析[J]. 中国腐蚀与防护学报, 2001, 21(5): 297-300. doi: 10.3969/j.issn.1005-4537.2001.05.007ZHANG Quan-cheng, WU Jian-sheng, CHEN Jia-guang, et al. Analysis on the corrosion rust of weathering steel exposed in atmosphere[J]. Journal of Chinese Society for Corrosion and Protection, 2001, 21(5): 297-300. (in Chinese). doi: 10.3969/j.issn.1005-4537.2001.05.007 [25] SUZUKI I, HISAMATSU Y, MASUKO N. Nature of atmospheric rust on iron[J]. Journal of Electrochemical Society, 1980, 127(10): 2210. doi: 10.1149/1.2129376 [26] STRATMANN M, BOHNENKAMP K, RAMCHANDRAN T. The influence of copper upon the atmospheric corrosion of iron[J]. Corrosion Science, 1987, 27(9): 905-926. doi: 10.1016/0010-938X(87)90058-8 [27] ASAMI K, KIKUCHI M. In-depth distribution of rusts on a plain carbon steel and weathering steels exposed to coastal-industrial atmosphere for 17 years[J]. Corrosion Science, 2003, 45(11): 2671-2688. doi: 10.1016/S0010-938X(03)00070-2 [28] NISHIMURA T, KATAYAMA H, NODA K, et al. Effect of Co and Ni on the corrosion behavior of low alloy steels in wet/dry environments[J]. Corrosion Science, 2000, 42(9): 1611-1621. doi: 10.1016/S0010-938X(00)00018-4 [29] NISHIMURA T, KODAMA T. Clarification of chemical state for alloying elements in iron rust using a binary-phase potential-pH diagram and physical analyses[J]. Corrosion Science, 2003, 45(5): 1073-1084. doi: 10.1016/S0010-938X(02)00186-5 [30] NISHIMURA T. Rust formation and corrosion performance of Si- and Al-bearing ultrafine grained weathering steel[J]. Corrosion Science, 2008, 50(5): 1306-1312. doi: 10.1016/j.corsci.2008.01.025 [31] KIM K Y, HWANG Y H, YOO J Y. Effect of silicon content on the corrosion properties of calcium-modified weathering steel in a chloride environment[J]. Corrosion, 2002, 58(7): 570-583. doi: 10.5006/1.3277648 [32] ASAMI K, KIKUCHI M. Characterization of rust layers on weathering steels air-exposed for a long period[J]. Journal of the Japan Institute of Metals, 2002, 66(6): 649-656. [33] 张全成, 马峰, 郑文龙. 耐候钢表面保护性锈层与基体结合强度的研究[J]. 机械工程材料, 2004, 28(6): 30-32. doi: 10.3969/j.issn.1000-3738.2004.06.011ZHANG Quan-cheng, MA Feng, ZHENG Wen-long. Bonding strength between the substrate and protective rust layer of weathering-steel[J]. Mechanical Engineering Materials, 2004, 28(6): 30-32. (in Chinese). doi: 10.3969/j.issn.1000-3738.2004.06.011 [34] 张全成, 吴建生. 耐候钢表面保护性锈层的力学性能[J]. 钢铁研究学报, 2006, 18(3): 42-45. doi: 10.3321/j.issn:1001-0963.2006.03.011ZHANG Quan-cheng, WU Jian-sheng. Mechanical properties of protective rust layer formed on surface of weathering steel panels[J]. Journal of Iron and Steel Research, 2006, 18(3): 42-45. (in Chinese). doi: 10.3321/j.issn:1001-0963.2006.03.011 [35] 姜传海. 晶须增强铝复合材料残余应力及钢材锈层残余应力[D]. 上海: 上海交通大学, 2001.JIANG Chuan-hai. Whisker reinforced aluminum composite residual stress and steel rust residual stress[D]. Shanghai: Shanghai Jiao Tong University, 2001. (in Chinese). [36] 王树涛, 高克玮, 杨善武, 等. 低碳贝氏体钢在青岛曝晒一年的锈层力学性能和抗热震性能研究[J]. 腐蚀科学与防护技术, 2010, 22(1): 9-13. https://www.cnki.com.cn/Article/CJFDTOTAL-FSFJ201001004.htmWANG Shu-tao, GAO Ke-wei, YANG Shan-wu, et al. Mechanical properties and thermal shock resistance of rust layer formed on low carbon bainitic steel after being exposed in Qingdao atmosphere for one year[J]. Corrosion Science and Protection Technology, 2010, 22(1): 9-13. (in Chinese). https://www.cnki.com.cn/Article/CJFDTOTAL-FSFJ201001004.htm [37] 王雷, 董俊华, 柯伟. 加载与循环干湿条件下MnCu耐候钢的腐蚀行为[J]. 中国腐蚀与防护学报, 2010, 30(4): 257-261. https://www.cnki.com.cn/Article/CJFDTOTAL-ZGFF201004003.htmWANG Lei, DONG Jun-hua, KE Wei. Corrosion behavior of MnCu cost-effective weathering steel under cyclic load in a wet/dry cyclic corrosion environment[J]. Journal of Chinese Society for Corrosion and Protection, 2010, 30(4): 257-261. (in Chinese). https://www.cnki.com.cn/Article/CJFDTOTAL-ZGFF201004003.htm [38] GAO K, LI D, PANG X, et al. Corrosion behaviour of low-carbon bainitic steel under a constant elastic load[J]. Corrosion Science, 2010, 52(10): 3428-3434. doi: 10.1016/j.corsci.2010.06.021 [39] KAYSER C R, SWANSON J A, LINZELL D G. Characterization of material properties of HPS-485W (70W) TMCP for bridge girder applications[J]. Journal of Bridge Engineering, 2006, 11(1): 99-108. doi: 10.1061/(ASCE)1084-0702(2006)11:1(99) [40] CHEN H T, GRONDIN G Y, DRIVER R G. Fatigue properties of high performance steel[C]//WIT Press. First International Conference on Fatigue Damage of Materials Experiment and Analysis, Fatigue Damage of Materials. Toronto: WIT Press, 2003: 181-191. [41] CHEN H T, GRONDIN G Y, DRIVER R G. Characterization of fatigue properties of ASTM A709 high performance steel[J]. Journal of Constructional Steel Research, 2007, 63(6): 838-848. doi: 10.1016/j.jcsr.2006.08.002 [42] BARTH K E, WHITE D W, BOBB B M. Negative bending resistance of HPS70W girders[J]. Journal of Constructional Steel Research, 2000, 53(1): 1-31. doi: 10.1016/S0143-974X(99)00037-1 [43] SAUSE R, FAHNESTOCK L A. Strength and ductility of HPS-100W I-girders in negative flexure[J]. Journal of Bridge Engineering, 2001, 6(5): 316-323. doi: 10.1061/(ASCE)1084-0702(2001)6:5(316) [44] SALEM E S, SAUSE R. Flexural strength and ductility of highway bridge I-girders fabricated from HPS-100W steel[D]. Bethlehem: Lehigh University, 2004. [45] YAKEL A J, MANS P, AZIZINAMINI A. Flexural capacity and ductility of HPS-70W bridge girders[J]. Engineering Journal, 2002, 39: 38-51. [46] 郑丽. 混合设计高性能钢梁抗剪性能研究[D]. 西安: 长安大学, 2013.ZHENG Li. Shear performance of hybrid girders fabricated using high performance steel[D]. Xi'an: Chang'an University, 2013. (in Chinese). [47] TAKAMORI H. Improving fatigue strength of welded joints[D]. Bethlehem: Lehigh University, 2000. [48] 王春生, 王雨竹, 崔冰, 等. 应力比对钢桥腹板间隙面外变形疲劳性能的影响试验[J]. 中国公路学报, 2017, 30(3): 72-81. doi: 10.3969/j.issn.1001-7372.2017.03.008WANG Chun-sheng, WANG Yu-zhu, CUI Bing, et al. Experiment on effect of stress ratio on out-of-plane distortion-induced fatigue performance of web gaps in steel bridges[J]. China Journal of Highway and Transport, 2017, 30(3): 72-81. (in Chinese). doi: 10.3969/j.issn.1001-7372.2017.03.008 [49] TAKABE M, OHYA M, AJIKI S. Estimation of quantity of Cl- from deicing salts on weathering steels used for bridges[J]. Steel Structures, 2008, 8(2): 73-81. [50] BD 7/01—1981, design manual for roads and bridges—weathering steel for highway structures[S]. [51] Corus Construction and Industrial. Weathering steel bridges[R]. London: Corus Construction and Industrial, 2010. [52] KRIV V. Design of corrosion allowances on structures from weathering steel[J]. Procedia Engineering, 2012, 40: 235-240. doi: 10.1016/j.proeng.2012.07.086 [53] YAMADA K. Japanese experience with weathering steel bridges[R]. Nagoya: Nagoya University, 1983. [54] 辽宁省高等级公路建设局, 中铁宝桥集团有限公司, 鞍钢集团钢铁研究院, 等. 公路桥梁耐候钢焊接施工技术指南[R]. 沈阳: 辽宁省高等级公路建设局, 2015.Liaoning Provincial Transportation Investment Group. China Railway Baoji Bridge Group Co., Ltd. Ansteel Research Institute of Iron and Steel, et al. Technology guide for construction of highway bridge weathering steel welding[R]. Shenyang: Liaoning Provincial Transportation Investment Group, 2015. (in Chinese). [55] MCDAD B, LAFFREY D C, DAMMANN M, et al. Performance of weathering steel in TxDOT bridges[R]. Austin: Texas Department of Transportation, 1999. [56] 陶晓燕, 史志强, 韩继跃, 等. 耐候钢桥的高强度螺栓连接试验研究[J]. 钢结构, 2018, 33(1): 105-108. https://www.cnki.com.cn/Article/CJFDTOTAL-GJIG201801022.htmTAO Xiao-yan, SHI Zhi-qiang, HAN Ji-yue, et al. Experimental research on high strength bolted connection of weathering steel bridge[J]. Steel Construction, 2018, 33(1): 105-108. (in Chinese). https://www.cnki.com.cn/Article/CJFDTOTAL-GJIG201801022.htm [57] 石振家, 王雷, 陈楠, 等. 耐候钢表面锈层及其稳定化处理现状与发展趋势[J]. 腐蚀科学与防护技术, 2015, 27(5): 503-508. https://www.cnki.com.cn/Article/CJFDTOTAL-FSFJ201505021.htmSHI Zhen-jia, WANG Lei, CHEN Nan, et al. Current situation and development trend of weathering steel surface rust layer and its stabilization treatment, corrosion science and protection technology[J]. Corrosion Science and Protection Technology, 2015, 27(5): 503-508. (in Chinese). https://www.cnki.com.cn/Article/CJFDTOTAL-FSFJ201505021.htm [58] CRAMPTON D D, HOLLOWAY K P, FRACZEK J. Assessment of weathering steel bridge performance in Iowa and development of inspection and maintenance techniques[R]. Iowa: Iowa Department of Transportation, 2012. [59] HARA S, KAMIMURA T, MIYUKI H, et al. Taxonomy for protective ability of rust layer using its composition formed on weathering steel bridge[J]. Corrosion Science, 2007, 49(3): 1131-1142. doi: 10.1016/j.corsci.2006.06.016 [60] 王春生, 常全禄, 翟晓亮, 等. 管翼缘组合梁桥设计与结构分析[J]. 钢结构, 2015, 30(6): 17-21. https://www.cnki.com.cn/Article/CJFDTOTAL-GJIG201506005.htmWANG Chun-sheng, CHANG Quan-lu, ZHAI Xiao-liang, et al. Design and structural analysis of tubular flange composite girder bridge[J]. Steel Construction, 2015, 30(6): 17-21. (in Chinese). https://www.cnki.com.cn/Article/CJFDTOTAL-GJIG201506005.htm [61] 朱劲松, 郭晓宇, 亢景付, 等. 耐候桥梁钢腐蚀力学行为研究及其应用进展[J]. 中国公路学报, 2019, 32(5): 1-16. https://www.cnki.com.cn/Article/CJFDTOTAL-ZGGL201905002.htmZHU Jin-song, GUO Xiao-yu, KANG Jing-fu, et al. Research on corrosion behavior, mechanical property and application of weathering steel in bridges[J]. China Journal of Highway and Transport, 2019, 32(5): 1-16. (in Chinese). https://www.cnki.com.cn/Article/CJFDTOTAL-ZGGL201905002.htm [62] TAMAKI Y, SHIMOZATO T, ARIZUMI Y, et al. Evaluation of corrosion deterioration of weathering steel bridge under the environmental corrosiveness[C]//Taylor and Francis. Proceedings of the 5th International Conference on Bridge Maintenance, Safety, Management and Life-cycle Optimization. London: Taylor and Francis, 2010: 3569-3575. -
点击查看大图
计量
- 文章访问数: 1469
- HTML全文浏览量: 254
- PDF下载量: 969
- 被引次数: 0
