Review on digital twin technology for highway construction and maintenance equipment
-
摘要: 为促进数字孪生技术在公路建养装备的发展与应用，从零部件、系统和设备3个层级出发，探讨了数字孪生公路建养装备的概念和组成，提出了机理-数据异构融合的数字孪生层级架构，研究了核心零部件液力变矩器多能域耦合和滚动轴承故障诊断、寿命预测的现状和最新进展，总结了融合机理-数据异构的公路建养装备零部件级数字孪生架构；基于装备动力流传递和大数据分析，将系统层级的数字孪生技术归纳为数字协同运动系统和后台数据管理系统，阐述了传动系统功率匹配、液压系统性能退化和数据管理系统工况感知，剖析了当前的技术应用与不足；围绕数字孪生装备的基本理念，阐释了设备级公路建养装备数字孪生技术的内涵与特征，介绍了当前公路建养装备数字孪生技术在工况划分、效能优化与作业质量控制的典型实践场景，探讨与展望了数字孪生公路建养装备所面临的挑战及关键技术。研究结果表明：公路建养装备的相关研究目前集中于典型工况的仿真分析与试验测试验证，存在复杂工况下多耦合场机理和算法研究不够深入、技术工况简单、外部参量与内部多物理场耦合研究不充分、试验结果与实际装备使用存在较大区别的问题；未来应从建立混合设备群状态智能监测与远程控制、研究不同场景下状态分析与数据处理算法的决策优化与指导、构建复杂环境下有效的“人-机-环”交互机制三方面入手，实现数字孪生技术在公路建养装备的落地应用。Abstract: To promote the development and application of digital twin technology for highway construction and maintenance equipment, starting from the three levels of components, systems, and equipment, the concept and composition of digital twin highway construction and maintenance equipment were discussed, and the digital twin hierarchical architecture of mechanism-data heterogeneous fusion was proposed. The current status and latest progress of multi-energy coupling of the hydraulic torque converter and rolling bearing fault diagnosis and life prediction of core components were investigated. The fusion mechanism-data heterogeneous digital twin architecture for highway construction and maintenance equipment at the component level was summarized. Based on the equipment power flow transfer and big data analysis, the digital twin technology at the system level was grouped into a digital co-motion system and a backend data management system. The power matching of the transmission system, the degradation of the hydraulic system performance, and the working condition sensing of the data management system were elaborated. The current technical applications and deficiencies were analyzed. Around the basic concept of digital twin equipment, the connotation and characteristics of digital twin technology for equipment-level highway construction and maintenance equipment were explained. The typical practical scenarios of digital twin technology for current highway construction and maintenance equipment in the division of working conditions, efficiency optimization, and quality control of operations were introduced. The challenges and key technologies faced by the digital twin highway construction and maintenance equipment were discussed and prospected. Research results show that the relevant research on highway construction and maintenance equipment currently focuses on the simulation analysis and experimental test verification under typical working conditions. There are problems of insufficient research on the mechanism and algorithm of multi-coupled fields under complex working conditions and simple technical working conditions. Furthermore, the problems of insufficient research on the coupling of external parameters and internal multi-physical fields, as well as the major differences between the experimental results and actual equipment use are present. The future direction should start from three aspects, namely the establishment of intelligent monitoring and remote control of mixed equipment group states, research based on different scenarios under the state analysis and data processing algorithm decision optimization and guidance, and building of effective "human-machine-ring" interaction mechanism under complex environments, so as to implement the digital twin technology for highway construction and maintenance equipment.
-
图 2 公路建养装备的数字孪生层级架构
Figure 2. Digital twin hierarchy architecture of highway construction and maintenance equipment
图 3 旋转机械零部件级数字孪生系统五层次结构
Figure 3. Five-level structure of component-level digital twin system of rotating machinery
图 5 公路建养装备的机电液系统
Figure 5. Electromechanical hydraulic system of highway construction and maintenance equipment
-
[1] 张霖, 陆涵. 从建模仿真看数字孪生[J]. 系统仿真学报, 2021, 33(5): 995-1007. https://www.cnki.com.cn/Article/CJFDTOTAL-XTFZ202105002.htmZHANG Lin, LU Han. Discussing digital twin from of modeling and simulation[J]. Journal of System Simulation, 2021, 33(5): 995-1007. (in Chinese) https://www.cnki.com.cn/Article/CJFDTOTAL-XTFZ202105002.htm [2] YE Ying-xin, HU Tian-liang, ZHANG Cheng-rui, et al. Design and development of a CNC machining process knowledge base using cloud technology[J]. The International Journal of Advanced Manufacturing Technology, 2018, 94(9): 3413-3425. [3] 孙惠斌, 潘军林, 张纪铎, 等. 面向切削过程的刀具数字孪生模型[J]. 计算机集成制造系统, 2019, 25(6): 1474-1480. https://www.cnki.com.cn/Article/CJFDTOTAL-JSJJ201906015.htmSUN Hui-bin, PAN Jun-lin, ZHANG Ji-duo, et al. Digital twin model for cutting tools in machining process[J]. Computer Integrated Manufacturing Systems, 2019, 25(6): 1474-1480. (in Chinese) https://www.cnki.com.cn/Article/CJFDTOTAL-JSJJ201906015.htm [4] 刘世民, 孙学民, 陆玉前, 等. 知识驱动的加工产品数字孪生拟态建模方法[J]. 机械工程学报, 2021, 57(23): 182-194. https://www.cnki.com.cn/Article/CJFDTOTAL-JXXB202123018.htmLIU Shi-min, SUN Xue-min, LU Yu-qian, et al. A knowledge- driven digital twin modeling method for machining products based on biomimicry[J]. Journal of Mechanical Engineering, 2021, 57(23): 182-194. (in Chinese) https://www.cnki.com.cn/Article/CJFDTOTAL-JXXB202123018.htm [5] 陶飞, 张辰源, 张贺, 等. 未来装备探索: 数字孪生装备[J]. 计算机集成制造系统, 2022, 28(1): 1-16. https://www.cnki.com.cn/Article/CJFDTOTAL-JSJJ202201001.htmTAO Fei, ZHANG Chen-yuan, ZHANG He, et al. Future equipment exploration: digital twin equipment[J]. Computer Integrated Manufacturing Systems, 2022, 28(1): 1-16. (in Chinese) https://www.cnki.com.cn/Article/CJFDTOTAL-JSJJ202201001.htm [6] ZHIDCHENKO V, MALYSHEVA I, HANDROOS H, et al. Faster than real-time simulation of mobile crane dynamics using digital twin concept[J]. Journal of Physics Conference Series, 2018, 1096: 012071. [7] KERR M A, NASRALLAH D S, KWOK T H. First steps toward the development of virtual platform for validation of autonomous wheel loader at pulp-and-paper mill: modelling, control and real-time simulation[C]//IEEE. 2021 IEEE International Conference on Autonomous Systems (ICAS). New York: IEEE, 2021: 21201493. [8] SHIBANOV D A, IVANOV S L, SHISHKIN P V. Digital technologies in modeling and design of mining excavators[J]. Journal of Physics: Conference Series, 2021, 1753(1): 012052. [9] TAO Fei, CHENG Jiang-feng, QI Qing-lin, et al. Digital twin-driven product design, manufacturing and service with big data[J]. The International Journal of Advanced Manufacturing Technology, 2018, 94(9): 3563-3576. [10] 周石恩. 基于数字孪生的复杂产品装配建模与精度分析方法[D]. 杭州: 浙江大学, 2019.ZHOU Shi-en. Modeling and precision analysis method of complex product assembly based on digital twinning[D]. Hangzhou: Zhejiang University, 2019. (in Chinese) [11] 陶飞, 张贺, 戚庆林, 等. 数字孪生模型构建理论及应用[J]. 计算机集成制造系统, 2021, 27(1): 1-15. https://www.cnki.com.cn/Article/CJFDTOTAL-JSJJ202101001.htmTAO Fei, ZHANG He, QI Qing-lin, et al. Theory of digital twin modeling and its application[J]. Computer Integrated Manufacturing Systems, 2021, 27(1): 1-15. (in Chinese) https://www.cnki.com.cn/Article/CJFDTOTAL-JSJJ202101001.htm [12] 李莎莎, 舒亮, 杨艳芳, 等. 逻辑与模型数据并行计算的数字孪生车间系统快速架构方法[J]. 机械工程学报, 2021, 57(17): 76-85. https://www.cnki.com.cn/Article/CJFDTOTAL-JXXB202117007.htmLI Sha-sha, SHU Liang, YANG Yan-fang, et al. Digital twin workshop system rapid construction method based on parallel computing of logic and model data[J]. Journal of Mechanical Engineering, 2021, 57(17): 76-85. (in Chinese) https://www.cnki.com.cn/Article/CJFDTOTAL-JXXB202117007.htm [13] 肖飞, 张为华, 王东辉, 等. 数字孪生驱动的固体发动机总体设计体系架构与应用[J]. 计算机集成制造系统, 2019, 25(6): 1405-1418. https://www.cnki.com.cn/Article/CJFDTOTAL-JSJJ201906009.htmXIAO Fei, ZHANG Wei-hua, WANG Dong-hui, et al. System architecture and applications for overall design of solid rocket motor based on digital twin[J]. Computer Integrated Manufacturing Systems, 2019, 25(6): 1405-1418. (in Chinese) https://www.cnki.com.cn/Article/CJFDTOTAL-JSJJ201906009.htm [14] DALIBOR M, MICHAEL J, RUMPE B, et al. Towards a model-driven architecture for interactive digital twin cockpits[M]// Conceptual Modeling. Berlin: Springer, 2020: 377-387. [15] 缪炳荣, 张卫华, 刘建新, 等. 工业4.0下智能铁路前沿技术问题综述[J]. 交通运输工程学报, 2021, 21(1): 115-131. doi: 10.19818/j.cnki.1671-1637.2021.01.005MIAO Bing-rong, ZHANG Wei-hua, LIU Jian-xin, et al. Review on frontier technical issues of intelligent railways under Industry 4.0[J]. Journal of Traffic and Transportation Engineering, 2021, 21(1): 115-131. (in Chinese) doi: 10.19818/j.cnki.1671-1637.2021.01.005 [16] 江海凡, 丁国富, 张剑. 数字孪生车间演化机理及运行机制[J]. 中国机械工程, 2020, 31(7): 824-832, 841. https://www.cnki.com.cn/Article/CJFDTOTAL-ZGJX202007012.htmJIANG Hai-fan, DING Guo-fu, ZHANG Jian. Evolution and operation mechanism of digital twin shopfloors[J]. China Mechanical Engineering, 2020, 31(7): 824-832, 841. (in Chinese) https://www.cnki.com.cn/Article/CJFDTOTAL-ZGJX202007012.htm [17] CHU Ying-guang, HATLEDAL L I, ZHANG Hou-xiang, et al. Virtual prototyping for maritime crane design and operations[J]. Journal of Marine Science and Technology, 2018, 23(4): 754-766. [18] MSC软件公司. 面向汽车制造的虚拟样机案例[EB/OL]. (2020-02-21)[2023-05-24]. https://www.mscsoftware.com/product/adams .MSC Software Corporation. The case of virtual prototyping for automobile manufacturing[EB/OL]. (2020-02-21)[2023-05-24].https://www.mscsoftware.com/product/adams . (in Chinese)[19] 宋悦, 时祎瑜, 于劲松, 等. 基于数字孪生的光电探测系统性能预测[J]. 计算机集成制造系统, 2019, 25(6): 1559-1567. https://www.cnki.com.cn/Article/CJFDTOTAL-JSJJ201906023.htmSONG Yue, SHI Yi-yu, YU Jin-song, et al. Application of digital twin model in performance prediction of electro-optical detection system[J]. Computer Integrated Manufacturing Systems, 2019, 25(6): 1559-1567. (in Chinese) https://www.cnki.com.cn/Article/CJFDTOTAL-JSJJ201906023.htm [20] FOURGEAU E, GOMEZ E, ADLI H, et al. System engineering workbench for multi-views systems methodology with 3DEXPERIENCE platform. The aircraft radar use case[C]//Springer. Complex Systems Design and Management Asia. Berlin: Springer, 2016: 269-270. [21] SESHADRI B R, KRISHNAMURTHY T. Structural health management of damaged aircraft structures using digital twin concept[C]//AIAA. 25th AIAA/AHS Adaptive Structures Conference. New York: AIAA, 2017: 1675. [22] HENSON C M, DECKER N I, HUANG Qiang. A digital twin strategy for major failure detection in fused deposition modeling processes[J]. Procedia Manufacturing, 2021, 53: 359-367. [23] LI Chen-zhao, MAHADEVAN S, LING You, et al. Dynamic Bayesian network for aircraft wing health monitoring digital twin[J]. AIAA Journal, 2017, 55(3): 930-941. [24] 宋学官, 来孝楠, 何西旺, 等. 重大装备形性一体化数字孪生关键技术[J]. 机械工程学报, 2022, 58(10): 298-325. https://www.cnki.com.cn/Article/CJFDTOTAL-JXXB202210028.htmSONG Xue-guan, LAI Xiao-nan, HE Xi-wang, et al. Key technologies of shape-performance integrated digital twin for major equipment[J]. Journal of Mechanical Engineering, 2022, 58(10): 298-325. (in Chinese) https://www.cnki.com.cn/Article/CJFDTOTAL-JXXB202210028.htm [25] 马睿, 尹韬, 李浩欣, 等. 大坝机理-数据融合模型的基本结构与特征[J]. 水力发电学报, 2022, 41(5): 59-74. https://www.cnki.com.cn/Article/CJFDTOTAL-SFXB202205007.htmMA Rui, YIN Tao, LI Hao-xin, et al. Basic structure and characteristics of dam mechanism-data- driven fusion models[J]. Journal of Hydroelectric Engineering, 2022, 41(5): 59-74. (in Chinese) https://www.cnki.com.cn/Article/CJFDTOTAL-SFXB202205007.htm [26] 郑恒玉. 基于CFD的叶片参数对液力变矩器的性能影响分析[D]. 西安: 长安大学, 2017.ZHENG Heng-yu. Analysis of the influence of blade parameters on the performance of hydraulic torque converter based on CFD[D]. Xi'an: Chang'an University, 2017. (in Chinese) [27] LIU Cheng, WEI Wei, YAN Qing-dong, et al. Design of experiments to investigate blade geometric effects on the hydrodynamic performance of torque converters[J]. Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering, 2019, 233(2): 276-291. [28] 闫清东, 李新毅, 魏巍. 基于多目标优化的液力变矩器叶形角度设计[J]. 华中科技大学学报(自然科学版), 2017, 45(9): 69-75. https://www.cnki.com.cn/Article/CJFDTOTAL-HZLG201709013.htmYAN Qing-dong, LI Xin-yi, WEI Wei. Streamline inlet and outlet angles of torque converter blade design based on multi-objective optimization[J]. Journal of Huazhong University of Science and Technology (Natural Science Edition), 2017, 45(9): 69-75. (in Chinese) https://www.cnki.com.cn/Article/CJFDTOTAL-HZLG201709013.htm [29] 刘城, 闫清东, 魏巍. 基于贝塞尔曲线的液力变矩器三维叶片造型方法[J]. 机械工程学报, 2017, 53(10): 201-208. https://www.cnki.com.cn/Article/CJFDTOTAL-JXXB201710025.htmLIU Cheng, YAN Qing-dong, WEI Wei. Three dimensional torque converter blade modelling based on bezier curves[J]. Journal of Mechanical Engineering, 2017, 53(10): 201-208. (in Chinese) https://www.cnki.com.cn/Article/CJFDTOTAL-JXXB201710025.htm [30] ZHANG Ze-yu, HUI Ji-zhuang, SUO Xue-feng, et al. Fluid-solid interaction analysis of torque converters[J]. High Technology Letters, 2019, 25(3): 239-244. [31] 张泽宇, 惠记庄, 索雪峰, 等. 液力变矩器在离心载荷作用下的强度分析[J]. 甘肃农业大学学报, 2018, 53(1): 162-167. https://www.cnki.com.cn/Article/CJFDTOTAL-GSND201801025.htmZHANG Ze-yu, HUI Ji-zhuang, SUO Xue-feng, et al. Strength analysis of hydraulic torque converter under centrifugal load[J]. Journal of Gansu Agricultural University, 2018, 53(1): 162-167. (in Chinese) https://www.cnki.com.cn/Article/CJFDTOTAL-GSND201801025.htm [32] 王安麟, 刘伟国, 龙广成. 基于液力变矩器流固耦合的叶片厚度设计方法[J]. 同济大学学报(自然科学版), 2015, 43(4): 599-604. https://www.cnki.com.cn/Article/CJFDTOTAL-TJDZ201504017.htmWANG An-lin, LIU Wei-guo, LONG Guang-cheng. Design method of blade thickness based on fluid-structure interaction of hydrodynamic torque converter[J]. Journal of Tongji University (Natural Science), 2015, 43(4): 599-604. (in Chinese) https://www.cnki.com.cn/Article/CJFDTOTAL-TJDZ201504017.htm [33] 闫清东, 刘博深, 魏巍. 液力变矩器流体-固体耦合压力脉动分析[J]. 兵工学报, 2016, 37(4): 577-583. https://www.cnki.com.cn/Article/CJFDTOTAL-BIGO201604001.htmYAN Qing-dong, LIU Bo-shen, WEI Wei. Pressure load fluctuation analysis of torque converter based on fluid-structure interaction[J]. Acta Armamentarii, 2016, 37(4): 577-583. (in Chinese) https://www.cnki.com.cn/Article/CJFDTOTAL-BIGO201604001.htm [34] 李文嘉, 王安麟, 李晓田, 等. 循环工况下变矩器叶片角设计空间的性能优化[J]. 哈尔滨工程大学学报, 2017, 38(11): 1781-1785. https://www.cnki.com.cn/Article/CJFDTOTAL-HEBG201711020.htmLI Wen-jia, WANG An-lin, LI Xiao-tian, et al. Performance optimization of the design space of torque converter's blade angle under the condition of driving cycle[J]. Journal of Harbin Engineering University, 2017, 38(11): 1781-1785. (in Chinese) https://www.cnki.com.cn/Article/CJFDTOTAL-HEBG201711020.htm [35] 惠记庄, 胡浩, 代然, 等. 基于MSC的变矩器膨胀变形分析[J]. 中国公路学报, 2015, 28(5): 144-149. https://www.cnki.com.cn/Article/CJFDTOTAL-ZGGL201505012.htmHUI Ji-zhuang, HU Hao, DAI Ran, et al. MSC-based expansion and deformation analysis of torque converter[J]. China Journal of Highway and Transport, 2015, 28(5): 144-149. (in Chinese) https://www.cnki.com.cn/Article/CJFDTOTAL-ZGGL201505012.htm [36] 索雪峰, 焦生杰, 张泽宇, 等. 基于ANSYS-CFX的液力变矩器流场性能计算与试验研究[J]. 机械设计, 2018, 35(10): 8-14. https://www.cnki.com.cn/Article/CJFDTOTAL-JXSJ201810002.htmSUO Xue-feng, JIAO Sheng-jie, ZHANG Ze-yu, et al. Performance calculation and experimental research of hydraulic torque converter based on ANSYS-CFX[J]. Journal of Machine Design, 2018, 35(10): 8-14. (in Chinese) https://www.cnki.com.cn/Article/CJFDTOTAL-JXSJ201810002.htm [37] 惠记庄, 张广辉, 聂春鹏, 等. 钣金型液力变矩器外特性计算方法[J]. 交通运输工程学报, 2015, 15(1): 74-81. doi: 10.19818/j.cnki.1671-1637.2015.01.010HUI Ji-zhuang, ZHANG Guang-hui, NIE Chun-peng, et al. Calculation method of external characteristic for sheet-metal hydraulic torque converter[J]. Journal of Traffic and Transportation Engineering, 2015, 15(1): 74-81. (in Chinese) doi: 10.19818/j.cnki.1671-1637.2015.01.010 [38] LIU Chun-bao, YANG Kong-hua, LI Jing, et al. Performance improvement and flow field investigation in hydraulic torque converter based on a new design of segmented blades[J]. Proceedings of the Institution of Mechanical Engineers, Part D—Journal of Automobile Engineering, 2020, 234(8): 2162-2175. [39] WU Guang-qiang, CHEN Jie, ZHEN Wen-jie. Performance analysis and improvement of flat torque converters using DOE method[J]. Chinese Journal of Mechanical Engineering, 2018, 31(4): 101-106. [40] 魏巍, 彭卉, 刘旭, 等. 液力传动车辆闭锁充油动态缓冲特性优化[J]. 兵工学报, 2019, 40(7): 1358-1364. https://www.cnki.com.cn/Article/CJFDTOTAL-BIGO201907004.htmWEI Wei, PENG Hui, LIU Xu, et al. Research on dynamic oil-filling cushioning properties of locking clutch in a hydrodynamic transmission vehicle[J]. Acta Armamentarii, 2019, 40(7): 1358-1364. (in Chinese) https://www.cnki.com.cn/Article/CJFDTOTAL-BIGO201907004.htm [41] 李文嘉, 王安麟, 孟庆华, 等. 液力变矩器动态循环流量的传递函数表征法[J]. 华南理工大学学报(自然科学版), 2016, 44(7): 22-28. https://www.cnki.com.cn/Article/CJFDTOTAL-HNLG201607004.htmLI Wen-jia, WANG An-lin, MENG Qing-hua, et al. Transfer function representation of dynamic circulating flow rate of torque converter[J]. Journal of South China University of Technology (Natural Science Edition), 2016, 44(7): 22-28. (in Chinese) https://www.cnki.com.cn/Article/CJFDTOTAL-HNLG201607004.htm [42] 李文嘉, 王安麟, 曹岩, 等. 面向变矩器设计性能的平面流模型选用方法[J]. 西安交通大学学报, 2017, 51(7): 78-83, 155. https://www.cnki.com.cn/Article/CJFDTOTAL-XAJT201707012.htmLI Wen-jia, WANG An-lin, CAO Yan, et al. Method of selecting planar flow model for the design performance of torque convertors[J]. Journal of Xi'an Jiaotong University, 2017, 51(7): 78-83, 155. (in Chinese) https://www.cnki.com.cn/Article/CJFDTOTAL-XAJT201707012.htm [43] 王安麟, 孟庆华, 李文嘉, 等. 面向液力变矩器定制化选型的积分加权评价法[J]. 华南理工大学学报(自然科学版), 2016, 44(6): 143-148. https://www.cnki.com.cn/Article/CJFDTOTAL-HNLG201606023.htmWANG An-lin, MENG Qing-hua, LI Wen-jia, et al. Integral weighted evaluation method for custom-made type selection of hydraulic torque converters[J]. Journal of South China University of Technology (Natural Science Edition), 2016, 44(6): 143-148. (in Chinese) https://www.cnki.com.cn/Article/CJFDTOTAL-HNLG201606023.htm [44] ZHANG Ze-yu, HUI Ji-zhuang, SHI Ze, et al. Modal analysis of the torque converter in different prestress[J]. High Technology Letters, 2020, 26(1): 61-67. [45] 张泽宇, 卜正锋, 惠记庄, 等. 牵引工况下大功率液力变矩器总成热特性研究[J]. 长安大学学报(自然科学版), 2018, 38(3): 116-126. https://www.cnki.com.cn/Article/CJFDTOTAL-XAGL201803015.htmZHANG Ze-yu, BU Zheng-feng, HUI Ji-zhuang, et al. Thermal characteristics of assembly of high power torque converter in traction condition[J]. Journal of Chang'an University (Natural Science Edition), 2018, 38(3): 116-126. (in Chinese) https://www.cnki.com.cn/Article/CJFDTOTAL-XAGL201803015.htm [46] 陈奇, 姚志刚, 陈无畏, 等. 基于模型的液力变矩器故障诊断系统的设计与校验[J]. 汽车工程, 2018, 40(10): 1246-1253. https://www.cnki.com.cn/Article/CJFDTOTAL-QCGC201810018.htmCHEN Qi, YAO Zhi-gang, CHEN Wu-wei, et al. Design and verification of model-based fault diagnosis system for hydraulic torque converter[J]. Automotive Engineering, 2018, 40(10): 1246-1253. (in Chinese) https://www.cnki.com.cn/Article/CJFDTOTAL-QCGC201810018.htm [47] LIU Chun-bao, LI Jing, BU Wei-yang, et al. Application of scale-resolving simulation to a hydraulic coupling, a hydraulic retarder, and a hydraulic torque converter[J]. Journal of Zhejiang University—Science A (Applied Physics and Engineering), 2018, 19(12): 904-925. [48] YANG Yang, LIOU W W, QURESHI F, et al. Transmission fluid properties effects on performance characteristics of a torque converter: a computational study[J]. Tribology Transactions, 2021, 64(6): 1055-1063. [49] 刘城, 闫清东, 李娟, 等. 高功率密度液力变矩器空化特性研究[J]. 机械工程学报, 2020, 56(24): 147-155. https://www.cnki.com.cn/Article/CJFDTOTAL-JXXB202024015.htmLIU Cheng, YAN Qing-dong, LI Juan, et al. Investigation on the cavitation characteristics of high power-density torque converter[J]. Journal of Mechanical Engineering, 2020, 56(24): 147-155. (in Chinese) https://www.cnki.com.cn/Article/CJFDTOTAL-JXXB202024015.htm [50] 张焱, 冯乔琦, 黄庆卿, 等. 非负自编码网络基于部分特征表示的变工况滚动轴承状态识别[J]. 仪器仪表学报, 2020, 41(4): 77-85. https://www.cnki.com.cn/Article/CJFDTOTAL-YQXB202004009.htmZHANG Yan, FENG Qiao-qi, HUANG Qing-qing, et al. Rolling bearing state recognition under variable condition using part-based representation of nonnegativity constrained autoencoder networks[J]. Chinese Journal of Scientific Instrument, 2020, 41(4): 77-85. (in Chinese) https://www.cnki.com.cn/Article/CJFDTOTAL-YQXB202004009.htm [51] 周建民, 尹文豪, 游涛, 等. 结合DSHDD和模糊评价的滚动轴承退化状态在线识别[J]. 振动工程学报, 2021, 34(3): 646-653. https://www.cnki.com.cn/Article/CJFDTOTAL-ZDGC202103023.htmZHOU Jian-min, YIN Wen-hao, YOU Tao, et al. Online identification of rolling bearing degradation state based on DSHDD and fuzzy evaluation[J]. Journal of Vibration Engineering, 2021, 34(3): 646-653. (in Chinese) https://www.cnki.com.cn/Article/CJFDTOTAL-ZDGC202103023.htm [52] 曹宁, 江志农, 高金吉. 小样本下基于迁移学习的轴承状态识别方法[J]. 噪声与振动控制, 2020, 40(5): 89-94, 132. https://www.cnki.com.cn/Article/CJFDTOTAL-ZSZK202005016.htmCAO Ning, JIANG Zhi-nong, GAO Jin-ji. Rolling bearing state recognition based on transfer learning under small samples[J]. Noise and Vibration Control, 2020, 40(5): 89-94, 132. (in Chinese) https://www.cnki.com.cn/Article/CJFDTOTAL-ZSZK202005016.htm [53] 王圣杰, 殷红, 彭珍瑞. 基于改进HHT和SVM的滚动轴承故障状态识别[J]. 噪声与振动控制, 2021, 41(1): 89-94, 107. https://www.cnki.com.cn/Article/CJFDTOTAL-ZSZK202101018.htmWANG Sheng-jie, YIN Hong, PENG Zhen-rui. Fault detection of rolling bearings based on improved HHT and SVM[J]. Noise and Vibration Control, 2021, 41(1): 89-94, 107. (in Chinese) https://www.cnki.com.cn/Article/CJFDTOTAL-ZSZK202101018.htm [54] 谢锋云, 陈红年, 谢三毛, 等. 基于粒子群优化核主元分析的轴承状态识别[J]. 测控技术, 2018, 37(3): 28-31, 35. https://www.cnki.com.cn/Article/CJFDTOTAL-IKJS201803010.htmXIE Feng-yun, CHEN Hong-nian, XIE San-mao, et al. Bearing state recognition based on kernel principal component analysis of particle swarm optimization[J]. Measurement and Control Technology, 2018, 37(3): 28-31, 35. (in Chinese) https://www.cnki.com.cn/Article/CJFDTOTAL-IKJS201803010.htm [55] 裴迪, 岳建海, 焦静. 基于自相关与能量算子增强的滚动轴承微弱故障特征提取[J]. 振动与冲击, 2021, 40(11): 101-108, 123. https://www.cnki.com.cn/Article/CJFDTOTAL-ZDCJ202111015.htmPEI Di, YUE Jian-hai, JIAO Jing. Weak fault feature extraction of rolling bearing based on autocorrelation and energy operator enhancement[J]. Journal of Vibration and Shock, 2021, 40(11): 101-108, 123. (in Chinese) https://www.cnki.com.cn/Article/CJFDTOTAL-ZDCJ202111015.htm [56] 温江涛, 闫常弘, 孙洁娣, 等. 基于压缩采集与深度学习的轴承故障诊断方法[J]. 仪器仪表学报, 2018, 39(1): 171-179. https://www.cnki.com.cn/Article/CJFDTOTAL-YQXB201801021.htmWEN Jiang-tao, YAN Chang-hong, SUN Jie-di, et al. Bearing fault diagnosis method based on compressed acquisition and deep learning[J]. Chinese Journal of Scientific Instrument, 2018, 39(1): 171-179. (in Chinese) https://www.cnki.com.cn/Article/CJFDTOTAL-YQXB201801021.htm [57] 曹正志, 叶春明. 考虑转动周期的轴承剩余使用寿命预测[J]. 计算机集成制造系统, (2021-07-05)[2023-05-24]. https://kns.cnki.net/kcms/detail/11.5946.TP.20210702.1723.008.html .CAO Zheng-zhi, YE Chun-ming. Prediction of bearing remaining useful life involving the rotation period[J]. Computer Integrated Manufacturing Systems, (2021-07-05)[2023-05-24].https://kns.cnki.net/kcms/detail/11.5946.TP.20210702.1723.008.html . (in Chinese)[58] KANG Shou-qiang, CHEN Wei-wei, WANG Yu-jing, et al. Method of state identification of rolling bearings based on deep domain adaptation under varying loads[J]. IET Science, Measurement and Technology, 2020, 14(3): 303-313. [59] 吴晨芳, 杨世锡, 黄海舟, 等. 一种基于改进的LeNet-5模型滚动轴承故障诊断方法研究[J]. 振动与冲击, 2021, 40(12): 55-61. https://www.cnki.com.cn/Article/CJFDTOTAL-ZDCJ202112008.htmWU Chen-fang, YANG Shi-xi, HUANG Hai-zhou, et al. An improved fault diagnosis method of rolling bearings based on LeNet-5[J]. Journal of Vibration and Shock, 2021, 40(12): 55-61. (in Chinese) https://www.cnki.com.cn/Article/CJFDTOTAL-ZDCJ202112008.htm [60] 张琛, 赵荣珍, 邓林峰. 基于变分模态分解奇异值熵的滚动轴承微弱故障辨识方法[J]. 振动与冲击, 2018, 37(21): 87-91, 107. https://www.cnki.com.cn/Article/CJFDTOTAL-ZDCJ201821014.htmZHANG Chen, ZHAO Rong-zhen, DENG Lin-feng. Weak fault identification of rolling bearings based on VMD singular value entropy[J]. Journal of Vibration and Shock, 2018, 37(21): 87-91, 107. (in Chinese) https://www.cnki.com.cn/Article/CJFDTOTAL-ZDCJ201821014.htm [61] 丁家满, 吴晔辉, 罗青波, 等. 基于深度森林的轴承故障诊断方法[J]. 振动与冲击, 2021, 40(12): 107-113. https://www.cnki.com.cn/Article/CJFDTOTAL-ZDCJ202112014.htmDING Jia-man, WU Ye-hui, LUO Qing-bo, et al. A fault diagnosis method of mechanical bearing based on the deep forest[J]. Journal of Vibration and Shock, 2021, 40(12): 107-113. (in Chinese) https://www.cnki.com.cn/Article/CJFDTOTAL-ZDCJ202112014.htm [62] 张西宁, 余迪, 刘书语. 基于迁移学习的小样本轴承故障诊断方法研究[J]. 西安交通大学学报, 2021, 55(10): 30-37. https://www.cnki.com.cn/Article/CJFDTOTAL-XAJT202110004.htmZHANG Xi-ning, YU Di, LIU Shu-yu. Research on fault diagnosis method for small sample bearing based on transfer learning[J]. Journal of Xi'an Jiaotong University, 2021, 55(10): 30-37. (in Chinese) https://www.cnki.com.cn/Article/CJFDTOTAL-XAJT202110004.htm [63] 齐咏生, 郭春雨, 师芳, 等. 基于双结构深度学习的滚动轴承故障智能诊断[J]. 振动与冲击, 2021, 40(10): 103-113. https://www.cnki.com.cn/Article/CJFDTOTAL-ZDCJ202110014.htmQI Yong-sheng, GUO Chun-yu, SHI Fang, et al. Intelligent diagnosis algorithm for rolling element bearings faults based on dual structure deep learning[J]. Journal of Vibration and Shock, 2021, 40(10): 103-113. (in Chinese) https://www.cnki.com.cn/Article/CJFDTOTAL-ZDCJ202110014.htm [64] 齐咏生, 樊佶, 刘利强, 等. 基于形态学分形和极限学习机的风电机组轴承故障诊断[J]. 太阳能学报, 2020, 41(6): 102-112. https://www.cnki.com.cn/Article/CJFDTOTAL-TYLX202006014.htmQI Yong-sheng, FAN Ji, LIU Li-qiang, et al. Fault diagnosis of wind turbine bearings based on morphological fractal and extreme learning machine[J]. Acta Energiae Solaris Sinica, 2020, 41(6): 102-112. (in Chinese) https://www.cnki.com.cn/Article/CJFDTOTAL-TYLX202006014.htm [65] 赵春华, 胡恒星, 陈保家, 等. 基于深度学习特征提取和WOA-SVM状态识别的轴承故障诊断[J]. 振动与冲击, 2019, 38(10): 31-37, 48. https://www.cnki.com.cn/Article/CJFDTOTAL-ZDCJ201910005.htmZHAO Chun-hua, HU Heng-xing, CHEN Bao-jia, et al. Bearing fault diagnosis based on the deep learning feature extraction and WOA-SVM state recognition[J]. Journal of Vibration and Shock, 2019, 38(10): 31-37, 48. (in Chinese) https://www.cnki.com.cn/Article/CJFDTOTAL-ZDCJ201910005.htm [66] LU Yi-xiang, SONG Zhi-hong, GAO Qing-wei, et al. Bearing fault diagnosis based on multi-band filtering[J]. IET Science, Measurement and Technology, 2022, 16(2): 101-117. [67] YANG Bin, LEI Ya-guo, JIA Feng, et al. A polynomial kernel i nduced distance metric to improve deep transfer learning for fault diagnosis of machines[J]. IEEE Transactions on Industrial Electronics, 2020, 67(11): 9747-9757. [68] WEN Long, GAO Liang, LI Xin-yu. A new deep transfer learning based on sparse auto-encoder for fault diagnosis[J]. IEEE Transactions on Systems, Man, and Cybernetics: Systems, 2019, 49(1): 136-144. [69] LI Xiang, ZHANG Wei, DING Qian. A robust intelligent fault diagnosis method for rolling element bearings based on deep distance metric learning[J]. Neurocomputing, 2018, 310: 77-95. [70] 王玉静, 李少鹏, 康守强, 等. 结合CNN和LSTM的滚动轴承剩余使用寿命预测方法[J]. 振动、测试与诊断, 2021, 41(3): 439-446, 617. https://www.cnki.com.cn/Article/CJFDTOTAL-ZDCS202103003.htmWANG Yu-jing, LI Shao-peng, KANG Shou-qiang, et al. Method of predicting remaining useful life of rolling bearing combining CNN and LSTM[J]. Journal of Vibration, Measurement and Diagnosis, 2021, 41(3): 439-446, 617. (in Chinese) https://www.cnki.com.cn/Article/CJFDTOTAL-ZDCS202103003.htm [71] 张焱, 汤宝平, 韩延, 等. 融合失效样本与截尾样本的滚动轴承寿命预测[J]. 振动与冲击, 2017, 36(23): 10-16. https://www.cnki.com.cn/Article/CJFDTOTAL-ZDCJ201723002.htmZHANG Yan, TANG Bao-ping, HAN Yan, et al. Life prediction for rolling bearings utilizing both failure and truncated samples[J]. Journal of Vibration and Shock, 2017, 36(23): 10-16. (in Chinese) https://www.cnki.com.cn/Article/CJFDTOTAL-ZDCJ201723002.htm [72] 康守强, 邢颖怡, 王玉静, 等. 基于无监督深度模型迁移的滚动轴承寿命预测方法[J]. 自动化学报, 2021, DOI: 10.16383/j.aas.c200890.KANG Shou-qiang, XING Ying-yi, WANG Yu-jing, et al. Rolling bearing life prediction based on unsupervised deep model transfer[J]. Acta Automatica Sinica, 2021, DOI: 10.16383/j.aas.c200890.(inChinese) [73] 刘小峰, 冯伟, 柏林. 考虑退化轨迹差异性与相似性的轴承RUL预测[J]. 控制与决策, 2021, 36(11): 2833-2840. https://www.cnki.com.cn/Article/CJFDTOTAL-KZYC202111030.htmLIU Xiao-feng, FENG Wei, BO Lin. Bearing RUL prediction of bearing remaining useful life involving difference and similarity of degradation trajectories[J]. Control and Decision, 2021, 36(11): 2833-2840. (in Chinese) https://www.cnki.com.cn/Article/CJFDTOTAL-KZYC202111030.htm [74] 吴昊年, 陈仁祥, 胡小林, 等. 改进均衡分布适配的滚动轴承寿命阶段识别[J]. 振动工程学报, 2021, 34(1): 194-201. https://www.cnki.com.cn/Article/CJFDTOTAL-ZDGC202101022.htmWU Hao-nian, CHEN Ren-xiang, HU Xiao-lin, et al. Life stage identification of rolling bearing based on improved BDA method[J]. Journal of Vibration Engineering, 2021, 34(1): 194-201. (in Chinese) https://www.cnki.com.cn/Article/CJFDTOTAL-ZDGC202101022.htm [75] 陈仁祥, 陈思杨, 胡小林, 等. 源域多样本集成GFK的不同工况下滚动轴承寿命状态识别[J]. 振动工程学报, 2020, 33(3): 614-621. https://www.cnki.com.cn/Article/CJFDTOTAL-ZDGC202003021.htmCHEN Ren-xiang, CHEN Si-yang, HU Xiao-lin, et al. Life status identification of rolling bearing under different working condition based on multi-source integrated GFK[J]. Journal of Vibration Engineering, 2020, 33(3): 614-621. (in Chinese) https://www.cnki.com.cn/Article/CJFDTOTAL-ZDGC202003021.htm [76] 柏林, 闫康, 刘小峰. 面向轴承寿命预测的特征评估与模型优化[J]. 振动、测试与诊断, 2020, 40(2): 361-366, 422. https://www.cnki.com.cn/Article/CJFDTOTAL-ZDCS202002022.htmBO Lin, YAN Kang, LIU Xiao-feng. Feature evaluation and model optimization for bearing life prediction[J]. Journal of Vibration, Measurement and Diagnosis, 2020, 40(2): 361-366, 422. (in Chinese) https://www.cnki.com.cn/Article/CJFDTOTAL-ZDCS202002022.htm [77] QING Chuan-fan, YU Fei, MIN Xuan. Research on life prediction of motor bearing based on vibration signal[J]. Journal of Physics: Conference Series, 2021(1907): 012054. [78] 董绍江, 吴文亮, 贺坤, 等. 基于性能衰退评估的轴承寿命状态识别方法研究[J]. 振动与冲击, 2021, 40(5): 186-192, 210. https://www.cnki.com.cn/Article/CJFDTOTAL-ZDCJ202105026.htmDONG Shao-jiang, WU Wen-liang, HE Kun, et al. Bearing life state recognition method based on performance degradation evaluation[J]. Journal of Vibration and Shock, 2021, 40(5): 186-192, 210. (in Chinese) https://www.cnki.com.cn/Article/CJFDTOTAL-ZDCJ202105026.htm [79] 张泽宇, 惠记庄, 武琳琳, 等. 一种装载机用发动机与液力变矩器的功率匹配方法: 中国, CN109990090B[P]. 2020-07-10.ZHANG Ze-yu, HUI Ji-zhuang, WU Lin-lin, et al. A power matching method of a loader engine and a hydraulic torque converter: China, CN109990090B[P]. 2020-07-10. (in Chinese) [80] WANG Zhen-bao, QIN Si-cheng. Optimization of matching on torque converter with engine based on improved radar chart method[C]//IEEE. 2017 International Conference on Computer Network, Electronic and Automation (ICCNEA). New York: IEEE, 2017: 370-373. [81] 马惠臣, 刘城, 李娟, 等. 液力变矩器通用特性及其匹配方法的研究[J]. 北京理工大学学报, 2021, 41(9): 927-934. https://www.cnki.com.cn/Article/CJFDTOTAL-BJLG202109004.htmMA Hui-chen, LIU Cheng, LI Juan, et al. Research on general characteristics of hydraulic torque converter and its matching method[J]. Transactions of Beijing Institute of Technology, 2021, 41(9): 927-934. (in Chinese) https://www.cnki.com.cn/Article/CJFDTOTAL-BJLG202109004.htm [82] 彭正虎, 赵丽梅, 吴怀超, 等. 基于遗传算法的装载机发动机与液力变矩器匹配优化分析[J]. 机床与液压, 2017, 45(11): 126-130. https://www.cnki.com.cn/Article/CJFDTOTAL-JCYY201711029.htmPENG Zheng-hu, ZHAO Li-mei, WU Huai-chao, et al. Based on genetic algorithm loader engine and hydraulic torque converter matching optimization analysis[J]. Machine Tool and Hydraulics, 2017, 45(11): 126-130. (in Chinese) https://www.cnki.com.cn/Article/CJFDTOTAL-JCYY201711029.htm [83] 王振宝, 秦四成. 基于典型工况液力变矩器匹配性能的优化[J]. 中南大学学报(自然科学版), 2017, 48(2): 331-336. https://www.cnki.com.cn/Article/CJFDTOTAL-ZNGD201702009.htmWANG Zhen-bao, QIN Si-cheng. Optimization of matching on torque converter with engine based on typical operating condition[J]. Journal of Central South University (Science and Technology), 2017, 48(2): 331-336. (in Chinese) https://www.cnki.com.cn/Article/CJFDTOTAL-ZNGD201702009.htm [84] 李晓祥, 王安麟, 李晓田. 面向离合器接合过程控制的不确定性估计[J]. 西安交通大学学报, 2020, 54(7): 17-24. https://www.cnki.com.cn/Article/CJFDTOTAL-XAJT202007004.htmLI Xiao-xiang, WANG An-lin, LI Xiao-tian. Uncertainty estimation for clutch engagement process control[J]. Journal of Xi'an Jiaotong University, 2020, 54(7): 17-24. (in Chinese) https://www.cnki.com.cn/Article/CJFDTOTAL-XAJT202007004.htm [85] 汪润鸿, 王红军, 邹湘军, 等. 基于混合粒子群算法的组合式变速箱传动比优化研究[J]. 系统仿真学报, 2021, 33(4): 825-836. https://www.cnki.com.cn/Article/CJFDTOTAL-XTFZ202104010.htmWANG Run-hong, WANG Hong-jun, ZOU Xiang-jun, et al. Combined gearbox transmission ratio optimization research based on hybrid particle swarm[J]. Journal of System Simulation, 2021, 33(4): 825-836. (in Chinese) https://www.cnki.com.cn/Article/CJFDTOTAL-XTFZ202104010.htm [86] 王少杰, 侯亮, 方奕凯, 等. 考虑产品运行大数据的装载机变速箱优化设计[J]. 机械工程学报, 2018, 54(22): 218-232. https://www.cnki.com.cn/Article/CJFDTOTAL-JXXB201822026.htmWANG Shao-jie, HOU Liang, FANG Yi-kai, et al. Optimization design of wheel loader gearbox considering product operational big data[J]. Journal of Mechanical Engineering, 2018, 54(22): 218-232. (in Chinese) https://www.cnki.com.cn/Article/CJFDTOTAL-JXXB201822026.htm [87] 王晨, 赵治国, 张彤, 等. 复合功率分流式e-CVT结构优化及验证[J]. 中国公路学报, 2015, 28(3): 117-126. https://www.cnki.com.cn/Article/CJFDTOTAL-ZGGL201503019.htmWANG Chen, ZHAO Zhi-guo, ZHANG Tong, et al. Structure optimization and its validation for compound power-split e-CVT[J]. China Journal of Highway and Transport, 2015, 28(3): 117-126. (in Chinese) https://www.cnki.com.cn/Article/CJFDTOTAL-ZGGL201503019.htm [88] 张珊珊, 李方义, 贾秀杰, 等. 面向变速箱磨损状态评估的灰靶模型优化[J]. 计算机集成制造系统, 2019, 25(9): 2159-2166. https://www.cnki.com.cn/Article/CJFDTOTAL-JSJJ201909004.htmZHANG Shan-shan, LI Fang-yi, JIA Xiu-jie, et al. Optimization of grey target model for evaluation of wear state of gearbox[J]. Computer Integrated Manufacturing Systems, 2019, 25(9): 2159-2166. (in Chinese) https://www.cnki.com.cn/Article/CJFDTOTAL-JSJJ201909004.htm [89] YE Kai-qiang, GAO Hong, XIAO Ping, et al. DRNN-based shift decision for automatic transmission[J]. Advances in Mechanical Engineering, 2020, 12(11): 168781402097529. [90] 王京涛, 陆金桂, 王邦祥, 等. 食物链传导响应算法在齿轮箱优化中的应用[J]. 计算机集成制造系统, 2019, 25(1): 197-207. https://www.cnki.com.cn/Article/CJFDTOTAL-JSJJ201901020.htmWANG Jing-tao, LU Jin-gui, WANG Bang-xiang, et al. Application of food chain conduction response algorithm in gearbox optimization[J]. Computer Integrated Manufacturing Systems, 2019, 25(1): 197-207. (in Chinese) https://www.cnki.com.cn/Article/CJFDTOTAL-JSJJ201901020.htm [91] 刘永, 谷立臣, 杨彬, 等. 液压系统压力闭环调速及开环加载实验[J]. 机械设计与研究, 2015, 31(2): 121-124. https://www.cnki.com.cn/Article/CJFDTOTAL-JSYY201502037.htmLIU Yong, GU Li-chen, YANG Bin, et al. Experimental research on pressure control with adjusting speed under the close-loop and flow control with adjusting load under the open-loop in a hydraulics system[J]. Machine Design and Research, 2015, 31(2): 121-124. (in Chinese) https://www.cnki.com.cn/Article/CJFDTOTAL-JSYY201502037.htm [92] 杨彬, 谷立臣, 刘永. 机电液系统动能刚度图示化在线识别技术[J]. 振动与冲击, 2017, 36(4): 119-126. https://www.cnki.com.cn/Article/CJFDTOTAL-ZDCJ201704019.htmYANG Bin, GU Li-chen, LIU Yong. A graphical technique of kinetic energy stiffness identification for mechanical electro-hydraulic system[J]. Journal of Vibration and Shock, 2017, 36(4): 119-126. (in Chinese) https://www.cnki.com.cn/Article/CJFDTOTAL-ZDCJ201704019.htm [93] 许睿, 谷立臣. 轴向柱塞泵效率特性半经验参数化建模方法[J]. 农业机械学报, 2016, 47(7): 382-390. https://www.cnki.com.cn/Article/CJFDTOTAL-NYJX201607052.htmXU Rui, GU Li-chen. Semi-empirical parametric modeling for efficiency characteristics of axial piston pump[J]. Transactions of the Chinese Society for Agricultural Machinery, 2016, 47(7): 382-390. (in Chinese) https://www.cnki.com.cn/Article/CJFDTOTAL-NYJX201607052.htm [94] GUO Rui, LI Yong-tao, SHI Yue, et al. Research on identification method of wear degradation of external gear pump based on flow field analysis[J]. Sensors, 2020, 20(14): 4058. [95] 赵松, 谷立臣, 杨彬. 机电液系统多参量耦合机理及动能刚度分析方法[J]. 振动与冲击, 2018, 37(11): 27-33. https://www.cnki.com.cn/Article/CJFDTOTAL-ZDCJ201811006.htmZHAO Song, GU Li-chen, YANG Bin. Multi-variable coupled mechanism and kinetic energy stiffness analysis method for a mechanical-electrical hydraulic system[J]. Journal of Vibration and Shock, 2018, 37(11): 27-33. (in Chinese) https://www.cnki.com.cn/Article/CJFDTOTAL-ZDCJ201811006.htm [96] 褚学宁, 陈汉斯, 马红占. 性能数据驱动的机械产品关键设计参数识别方法[J]. 机械工程学报, 2021, 57(3): 185-196. https://www.cnki.com.cn/Article/CJFDTOTAL-JXXB202103018.htmCHU Xue-ning, CHEN Han-si, MA Hong-zhan. Identification of critical design parameter for mechanical products based on performance data[J]. Journal of Mechanical Engineering, 2021, 57(3): 185-196. (in Chinese) https://www.cnki.com.cn/Article/CJFDTOTAL-JXXB202103018.htm [97] 田再克, 李洪儒, 王卫国, 等. MOMED和双谱熵在液压泵退化特征提取中的应用[J]. 振动工程学报, 2019, 32(4): 730-738. https://www.cnki.com.cn/Article/CJFDTOTAL-ZDGC201904021.htmTIAN Zai-ke, LI Hong-ru, WANG Wei-guo, et al. Application of MOMED and bispectral analysis to degradation feature extraction for hydraulic pumps[J]. Journal of Vibration Engineering, 2019, 32(4): 730-738. (in Chinese) https://www.cnki.com.cn/Article/CJFDTOTAL-ZDGC201904021.htm [98] 卞永明, 方晓骏, 杨濛, 等. 基于模糊算法的无人驾驶压路机自动碾压控制[J]. 同济大学学报(自然科学版), 2017, 45(12): 1830-1838. https://www.cnki.com.cn/Article/CJFDTOTAL-TJDZ201712014.htmBIAN Yong-ming, FANG Xiao-jun, YANG Meng, et al. Automatic rolling control for unmanned vibratory roller based on fuzzy algorithm[J]. Journal of Tongji University (Natural Science), 2017, 45(12): 1830-1838. (in Chinese) https://www.cnki.com.cn/Article/CJFDTOTAL-TJDZ201712014.htm [99] 曹源文, 林艳文, 吴春洋, 等. 基于GPS技术的压路机碾压轨迹研究[J]. 哈尔滨工业大学学报, 2019, 51(1): 65-70. https://www.cnki.com.cn/Article/CJFDTOTAL-HEBX201901009.htmCAO Yuan-wen, LIN Yan-wen, WU Chun-yang, et al. The roller compacting trajectory of roller based on GPS technology[J]. Journal of Harbin Institute of Technology, 2019, 51(1): 65-70. (in Chinese) https://www.cnki.com.cn/Article/CJFDTOTAL-HEBX201901009.htm [100] KRISHNAMURTHY B K, TSENG H P, SCHMITT R L, et al. AutoPave: towards an automated paving system for asphalt pavement compaction operations[J]. Automation in Construction, 1998, 8(2): 165-180. [101] 潘小虎. 高温寒冷地区沥青路面施工质量控制体系研究[D]. 成都: 西南交通大学, 2018.PAN Xiao-hu. Study on quality control system of asphalt pavement construction in high temperature and cold area[D]. Chengdu: Southwest Jiaotong University, 2018. (in Chinese) [102] 白涛, 张军, 叶敏, 等. 多总线接口终端的摊铺机远程监控系统研究[J]. 控制工程, 2020, 27(10): 1788-1794. https://www.cnki.com.cn/Article/CJFDTOTAL-JZDF202010019.htmBAI Tao, ZHANG Jun, YE Min, et al. Research on paver remote monitoring system based on multi-bus interface terminal[J]. Control Engineering of China, 2020, 27(10): 1788-1794. (in Chinese) https://www.cnki.com.cn/Article/CJFDTOTAL-JZDF202010019.htm [103] KASSEM E, LIU Wen-ting, SCULLION T, et al. Development of compaction monitoring system for asphalt pavements[J]. Construction and Building Materials, 2015, 96: 334-345. [104] 阮杨志. 基于云辐射的机场高填方压实质量实时监控系统[D]. 北京: 北京航空航天大学, 2018.RUAN Yang-zhi. A real-time monitoring system of airport high fill compaction quality based on cloud radiation[D]. Beijing: Beihang University, 2018. (in Chinese) [105] 张军, 李义斌, 白涛, 等. 基于云平台的公路养护设备信息化管理系统[J]. 控制工程, 2021, 28(6): 1203-1209. https://www.cnki.com.cn/Article/CJFDTOTAL-JZDF202106021.htmZHANG Jun, LI Yi-bin, BAI Tao, et al. Information management system of highway maintenance equipment based on cloud platform[J]. Control Engineering of China, 2021, 28(6): 1203-1209. (in Chinese) https://www.cnki.com.cn/Article/CJFDTOTAL-JZDF202106021.htm [106] 赵瑜隆. 基于BIM技术的沥青面层施工过程控制研究[D]. 南京: 东南大学, 2018.ZHAO Yu-long. Research on construction process control of asphalt pavement based on BIM technology[D]. Nanjing: Southeast University, 2018. (in Chinese) [107] MA Yuan, CHEN Feng, MA Tao, et al. Intelligent compaction: an improved quality monitoring and control of asphalt pavement construction technology[J]. IEEE Transactions on Intelligent Transportation Systems, 2022, 23(9): 14875-14882. [108] 董刚, 刘义彬, 郑南翔. 沥青路面施工过程质量信息实时监控系统研究[J]. 公路交通科技, 2015, 32(11): 27-32, 40. https://www.cnki.com.cn/Article/CJFDTOTAL-GLJK201511005.htmDONG Gang, LIU Yi-bin, ZHENG Nan-xiang. Study on real-time monitoring system of asphalt pavement construction process quality information[J]. Journal of Highway and Transportation Research and Development, 2015, 32(11): 27-32, 40. (in Chinese) https://www.cnki.com.cn/Article/CJFDTOTAL-GLJK201511005.htm [109] 林通, 焦生杰, 叶敏. 高速公路沥青路面远程智能监控系统[J]. 长安大学学报(自然科学版), 2015, 35(1): 26-32. https://www.cnki.com.cn/Article/CJFDTOTAL-XAGL201501006.htmLIN Tong, JIAO Sheng-jie, YE Min. Remote intelligent monitoring system on the asphalt pavement construction of express highway[J]. Journal of Chang'an University (Natural Science Edition), 2015, 35(1): 26-32. (in Chinese) https://www.cnki.com.cn/Article/CJFDTOTAL-XAGL201501006.htm [110] 张英爽. 装载机传动系载荷谱的测取与应用研究[D]. 吉林: 吉林大学, 2014.ZHANG Ying-shuang. Measurement and application of load spectrum of loader transmission system[D]. Jilin: Jilin University, 2014. (in Chinese) [111] 马相明, 孙霞, 张强. 轮式装载机典型作业工况构建与分析[J]. 山东大学学报(工学版), 2015, 45(5): 82-87, 94. https://www.cnki.com.cn/Article/CJFDTOTAL-SDGY201505012.htmMA Xiang-ming, SUN Xia, ZHANG Qiang. Construction and analysis on typical working cycle of wheel loader[J]. Journal of Shandong University (Engineering Science), 2015, 45(5): 82-87, 94. (in Chinese) https://www.cnki.com.cn/Article/CJFDTOTAL-SDGY201505012.htm [112] 吕建美, 牛礼民, 秦子晨, 等. 并联混合动力汽车工况识别与参数优化[J]. 安徽工业大学学报(自然科学版), 2018, 35(3): 232-239, 255. https://www.cnki.com.cn/Article/CJFDTOTAL-HDYX201803008.htmLYU Jian-mei, NIU Li-min, QIN Zi-chen, et al. Driving cycle identification and parameters optimization for parallel hybrid electric vehicle[J]. Journal of Anhui University of Technology (Natural Science), 2018, 35(3): 232-239, 255. (in Chinese) https://www.cnki.com.cn/Article/CJFDTOTAL-HDYX201803008.htm [113] 姜超, 靳添絮, 罗维东, 等. 基于工况识别和马尔可夫链的混合动力地下铲运机功率预测[J]. 煤炭学报, 2019, 44(增1): 330-337. https://www.cnki.com.cn/Article/CJFDTOTAL-MTXB2019S1038.htmJIANG Chao, JIN Tian-xu, LUO Wei-dong, et al. Power prediction of hybrid power scraper based on conditions recognition and Markov chain[J]. Journal of China Coal Society, 2019, 44(S1): 330-337. (in Chinese) https://www.cnki.com.cn/Article/CJFDTOTAL-MTXB2019S1038.htm [114] 冯培恩, 彭贝, 高宇, 等. 液压挖掘机作业循环阶段的智能识别[J]. 浙江大学学报(工学版), 2016, 50(2): 209-217. https://www.cnki.com.cn/Article/CJFDTOTAL-ZDZC201602003.htmFENG Pei-en, PENG Bei, GAO Yu, et al. Intelligent identification for working-cycle stages of hydraulic excavator[J]. Journal of Zhejiang University (Engineering Science), 2016, 50(2): 209-217. (in Chinese) https://www.cnki.com.cn/Article/CJFDTOTAL-ZDZC201602003.htm [115] ZHANG Ze-yu, HUI Ji-zhuang, SHI Ze, et al. Cycle condition identification of loader based on optimized KNN algorithm[J]. IEEE Access, 2020, 8: 69532-69542. [116] HUANG Jian-fei, CHENG Xin-chun, SHEN Yu-ying, et al. Deep learning-based prediction of throttle value and state for wheel loaders[J]. Energies, 2021, 14(21): 7202. [117] 于向军, 槐元辉, 李学飞, 等. 基于克里金和粒子群算法的装载机铲掘轨迹规划[J]. 吉林大学学报(工学版), 2020, 50(2): 437-444. https://www.cnki.com.cn/Article/CJFDTOTAL-JLGY202002006.htmYU Xiang-jun, HUAI Yuan-hui, LI Xue-fei, et al. Shoveling trajectory planning method for wheel loader based on Kriging and particle swarm optimization[J]. Journal of Jilin University (Engineering and Technology Edition), 2020, 50(2): 437-444. (in Chinese) https://www.cnki.com.cn/Article/CJFDTOTAL-JLGY202002006.htm [118] CHEN Yan-hui, WANG Jian-zhen, ZHANG Te. Simulation study on the scooping trajectories of loader based on EDEM[J]. IOP Conference Series: Materials Science and Engineering, 2018, 382(4): 042016. [119] 石钧仁, 孙冬野, 秦大同, 等. 装载机避障轨迹规划及模型预测轨迹跟踪[J]. 中国公路学报, 2021, 34(5): 224-236. https://www.cnki.com.cn/Article/CJFDTOTAL-ZGGL202105021.htmSHI Jun-ren, SUN Dong-ye, QIN Da-tong, et al. Obstacle avoidance trajectory planning and model-predicted trajectory tracking of wheel loaders[J]. China Journal of Highway and Transport, 2021, 34(5): 224-236. (in Chinese) https://www.cnki.com.cn/Article/CJFDTOTAL-ZGGL202105021.htm [120] 邹乃威, 黄鸿岛, 章二平, 等. 面向作业终端动力需求的装载机循环工况的创建[J]. 农业工程学报, 2015, 31(1): 78-85. https://www.cnki.com.cn/Article/CJFDTOTAL-NYGU201501012.htmZOU Nai-wei, HUANG Hong-dao, ZHANG Er-ping, et al. Establish oriented operating terminals wheel loader duty cycle[J]. Transactions of the Chinese Society of Agricultural Engineering, 2015, 31(1): 78-85. (in Chinese) https://www.cnki.com.cn/Article/CJFDTOTAL-NYGU201501012.htm [121] 周笛, 张旭方, 张义民. 采煤机牵引部可靠性灵敏度分析及优化设计[J]. 东北大学学报(自然科学版), 2017, 38(1): 81-85. https://www.cnki.com.cn/Article/CJFDTOTAL-DBDX201701017.htmZHOU Di, ZHANG Xu-fang, ZHANG Yi-min. Reliability sensitivity analysis and optimization design of shearer traction part[J]. Journal of Northeastern University (Natural Science), 2017, 38(1): 81-85. (in Chinese) https://www.cnki.com.cn/Article/CJFDTOTAL-DBDX201701017.htm [122] 王振宝, 秦四成. 装载机整机能量分析与传动系统优化[J]. 中南大学学报(自然科学版), 2017, 48(9): 2338-2344. https://www.cnki.com.cn/Article/CJFDTOTAL-ZNGD201709012.htmWANG Zhen-bao, QIN Si-cheng. Analysis of energy distribution and optimization of powertrain on wheel loader[J]. Journal of Central South University (Science and Technology), 2017, 48(9): 2338-2344. (in Chinese) https://www.cnki.com.cn/Article/CJFDTOTAL-ZNGD201709012.htm [123] 赵丁选, 李天宇, 康怀亮, 等. 混合动力工程车辆自动变速技术[J]. 吉林大学学报(工学版), 2014, 44(2): 358-363. https://www.cnki.com.cn/Article/CJFDTOTAL-JLGY201402013.htmZHAO Ding-xuan, LI Tian-yu, KANG Huai-liang, et al. Automatic shift technology of hybrid power engineering vehicle[J]. Journal of Jilin University (Engineering and Technology Edition), 2014, 44(2): 358-363. (in Chinese) https://www.cnki.com.cn/Article/CJFDTOTAL-JLGY201402013.htm [124] 张泽宇, 惠记庄, 郑恒玉, 等. 旋挖钻机动力头液压系统全局功率匹配研究[J]. 机械科学与技术, 2016, 35(12): 1834-1841. https://www.cnki.com.cn/Article/CJFDTOTAL-JXKX201612007.htmZHANG Ze-yu, HUI Ji-zhuang, ZHENG Heng-yu, et al. Research of comprehensive power matching for rotary head's hydraulic system of rotary drilling rig power head[J]. Mechanical Science and Technology for Aerospace Engineering, 2016, 35(12): 1834-1841. (in Chinese) https://www.cnki.com.cn/Article/CJFDTOTAL-JXKX201612007.htm [125] 张泽宇, 惠记庄, 卜正锋, 等. 液力变矩器与发动机的功率匹配与转速感应控制[J]. 机械科学与技术, 2018, 37(1): 55-62. https://www.cnki.com.cn/Article/CJFDTOTAL-JXKX201801010.htmZHANG Ze-yu, HUI Ji-zhuang, BU Zheng-feng, et al. Power matching and speed sensing control between hydraulic torque converter and engine[J]. Mechanical Science and Technology for Aerospace Engineering, 2018, 37(1): 55-62. (in Chinese) https://www.cnki.com.cn/Article/CJFDTOTAL-JXKX201801010.htm [126] 闫旭冬, 杨敬, 权龙. 装载机工作过程联合仿真与试验[J]. 农业工程学报, 2015, 31(16): 102-109. https://www.cnki.com.cn/Article/CJFDTOTAL-NYGU201516015.htmYAN Xu-dong, YANG Jing, QUAN Long. Co-simulation and experiment of wheel loader during operation process[J]. Transactions of the Chinese Society of Agricultural Engineering, 2015, 31(16): 102-109. (in Chinese) https://www.cnki.com.cn/Article/CJFDTOTAL-NYGU201516015.htm [127] ZHANG Hua, ZHAO Lei, CHENG Hua. Research on hydraulic system optimization of loader based on GA-BP[J]. Manufacturing Technology, 2019, 19(6): 952-958. [128] 林涛, 王欣, 焦生杰, 等. 平地机变功率节能控制技术研究[J]. 中国公路学报, 2012, 25(6): 154-158. https://www.cnki.com.cn/Article/CJFDTOTAL-ZGGL201206028.htmLIN Tao, WANG Xin, JIAO Sheng-jie, et al. Study on energy saving technique based on engine power-variable control method for motor graders[J]. China Journal of Highway and Transport, 2012, 25(6): 154-158. (in Chinese) https://www.cnki.com.cn/Article/CJFDTOTAL-ZGGL201206028.htm [129] 朱武威, 李雨, 冯忠绪, 等. 基于闭环控制的压路机行走系统改进[J]. 中国公路学报, 2017, 30(5): 152-158. https://www.cnki.com.cn/Article/CJFDTOTAL-ZGGL201705020.htmZHU Wu-wei, LI Yu, FENG Zhong-xu, et al. Improvement of roller running system based on closed-loop control[J]. China Journal of Highway and Transport, 2017, 30(5): 152-158. (in Chinese) https://www.cnki.com.cn/Article/CJFDTOTAL-ZGGL201705020.htm [130] 林通. 基于云服务的振动压路机压实过程作业质量监控系统研究[D]. 西安: 长安大学, 2018.LIN Tong. Research on operation quality monitoring system of vibrating roller during compaction based on cloud service[D]. Xi'an: Chang'an University, 2018. (in Chinese) [131] LIU Dong-hai, CHEN Jun-jie, LI Shuai. Collaborative operation and real-time control of roller fleet for asphalt pavement compaction[J]. Automation in Construction, 2019, 98: 16-29. [132] 张晨光, 谢立扬, 焦生杰, 等. 沥青搅拌设备蜗壳除尘器流场仿真与试验[J]. 中国公路学报, 2018, 31(8): 218-226. https://www.cnki.com.cn/Article/CJFDTOTAL-ZGGL201808025.htmZHANG Chen-guang, XIE Li-yang, JIAO Sheng-jie, et al. Flow field simulation and experimental study on volute separators for asphalt mixing plants[J]. China Journal of Highway and Transport, 2018, 31(8): 218-226. (in Chinese) https://www.cnki.com.cn/Article/CJFDTOTAL-ZGGL201808025.htm [133] 李泽闯, 程培峰, 胡志文, 等. 土石路堤压实质量控制与碾压动力响应模拟分析[J]. 土木与环境工程学报(中英文), 2021, 43(4): 33-41. https://www.cnki.com.cn/Article/CJFDTOTAL-JIAN202104004.htmLI Ze-chuang, CHENG Pei-feng, HU Zhi-wen, et al. Compaction quality control and rolling dynamic response simulation analysis of earth-rock embankment[J]. Journal of Civil and Environmental Engineering, 2021, 43(4): 33-41. (in Chinese) https://www.cnki.com.cn/Article/CJFDTOTAL-JIAN202104004.htm [134] GRUDZI AN'G SKI M, MARCHEWKA L, PAJOR M, et al. Stereovision tracking system for monitoring loader crane tip position[J]. IEEE Access, 2020, 8: 223346-223358. [135] 谭鹏, 刘昕晖, 陈伟, 等. 装载机卸载工况动臂油缸回缩现象分析[J]. 吉林大学学报(工学版), 2021, 51(4): 1204-1212. https://www.cnki.com.cn/Article/CJFDTOTAL-JLGY202104006.htmTAN Peng, LIU Xin-hui, CHEN Wei, et al. Analysis on retracting phenomenon of boom cylinder of loader under unloading condition[J]. Journal of Jilin University (Engineering and Technology Edition), 2021, 51(4): 1204-1212. (in Chinese) https://www.cnki.com.cn/Article/CJFDTOTAL-JLGY202104006.htm [136] 贾洁, 刘洪海, 辛强, 等. 摊铺机熨平板冲击与振动耦合压实特性研究[J]. 振动与冲击, 2018, 37(16): 91-97, 146. https://www.cnki.com.cn/Article/CJFDTOTAL-ZDCJ201816014.htmJIA Jie, LIU Hong-hai, XIN Qiang, et al. Investigation of paver screed on coupling compaction characteristics considering shock and vibration[J]. Journal of Vibration and Shock, 2018, 37(16): 91-97, 146. (in Chinese) https://www.cnki.com.cn/Article/CJFDTOTAL-ZDCJ201816014.htm [137] 刘东海, 张翼飞, 刘强. 沥青混凝土心墙摊铺厚度及平整性实时控制研究[J]. 水力发电学报, 2021, 40(2): 195-203. https://www.cnki.com.cn/Article/CJFDTOTAL-SFXB202102020.htmLIU Dong-hai, ZHANG Yi-fei, LIU Qiang. Real-time quality control on lift thickness and pavement roughness of asphalt concrete core walls[J]. Journal of Hydroelectric Engineering, 2021, 40(2): 195-203. (in Chinese) https://www.cnki.com.cn/Article/CJFDTOTAL-SFXB202102020.htm [138] 姜婉, 朱振东. 宽幅摊铺机螺旋分料器转速对分料质量的影响[J]. 中国机械工程, 2016, 27(19): 2602-2606. https://www.cnki.com.cn/Article/CJFDTOTAL-ZGJX201619008.htmJIANG Wan, ZHU Zhen-dong. Impacts wide paver screed conveyor of speed on dosing quality[J]. China Mechanical Engineering, 2016, 27(19): 2602-2606. (in Chinese) https://www.cnki.com.cn/Article/CJFDTOTAL-ZGJX201619008.htm [139] 焦生杰, 徐清刚, 刘秋宝, 等. 双钢轮振动压路机与路面有效接触宽度研究及应用[J]. 长安大学学报(自然科学版), 2018, 38(2): 120-126. https://www.cnki.com.cn/Article/CJFDTOTAL-XAGL201802016.htmJIAO Sheng-jie, XU Qing-gang, LIU Qiu-bao, et al. Research and application on effective pavement contact width of double-drum vibratory roller[J]. Journal of Chang'an University (Natural Science Edition), 2018, 38(2): 120-126. (in Chinese) https://www.cnki.com.cn/Article/CJFDTOTAL-XAGL201802016.htm -
下载:
点击查看大图
图(6)
计量
- 文章访问数: 1647
- HTML全文浏览量: 615
- PDF下载量: 223
- 被引次数: 0
