Citation: | LI Feng, HUANG Song-chang, XU Jian, QIN Yong-chun. Performance evaluation and technical requirement of sealant and filler in asphalt pavement[J]. Journal of Traffic and Transportation Engineering, 2009, 9(2): 7-11. doi: 10.19818/j.cnki.1671-1637.2009.02.002 |
[1] |
ASTM D5329—04, standard test methods for sealants and fillers, hot-applied, for joints and cracks in asphaltic and Portland cement concrete pavements[S].
|
[2] |
ASTM D5078—95, standard specification for crack filler, hot-applied, for asphalt concrete and Portland cement con-crete pavements[S].
|
[3] |
ASTM D1190—97, standard specification for concrete joint sealer, hot-applied elastic type[S].
|
[4] |
ASTM D3405—97, standard specification for joint sealants, hot-applied, for concrete and asphalt pavements[S].
|
[5] |
ASTM D6690—06a, standard specification for joint and crack sealants, hot-applied, for concrete and asphalt pave-ments[S].
|
[6] |
ASTM D1985—91, standard practice for preparing concrete blocks for testing sealants, for joints and cracks[S].
|
[7] |
ASTM D217—02, standard test methods for cone penetration of lubricating grease[S].
|