| Citation: | ZUO Jian-yong, WANG Zong-ming, WU Meng-ling. Simulation model of air braking system for subway train[J]. Journal of Traffic and Transportation Engineering, 2013, 13(2): 42-47. doi: 10.19818/j.cnki.1671-1637.2013.02.006
|
| [1] |
PUGI L, MAVLEZZI M, ALLOTTA B, et al. A parametric library for the simulation of a Union Internationale des Chemins de Fer(UIC)pneumatic braking system[J]. Proceedings of the Institution of Mechanical Engineers, Part F: Journal of Rail and Rapid Transit, 2004, 218(2): 117-132. doi: 10.1243/0954409041319632
|
| [2] |
魏伟, 李文辉. 列车空气制动系统数值仿真[J]. 铁道学报, 2003, 25(1): 38-42. doi: 10.3321/j.issn:1001-8360.2003.01.008
WEI Wei, LI Wen-hui. Simulation model of train brake system[J]. Journal of the China Railway Society, 2003, 25(1): 38-42. (in Chinese). doi: 10.3321/j.issn:1001-8360.2003.01.008
|
| [3] |
罗仁, 曾京. 铁道车辆防滑控制仿真[J]. 机械工程学报, 2008, 44(3): 29-34. doi: 10.3321/j.issn:0577-6686.2008.03.005
LUO Ren, ZENG Jing. Anti-sliding control simulation of railway vehicle braking[J]. Chinese Journal of Mechanical Engineering, 2008, 44(3): 29-34. (in Chinese). doi: 10.3321/j.issn:0577-6686.2008.03.005
|
| [4] |
李和平, 杨伟君, 金哲, 等. 高速列车制动系统气动仿真平台[J]. 铁道机车车辆, 2011, 31(5): 89-92. https://www.cnki.com.cn/Article/CJFDTOTAL-TDJC201105024.htm
LI He-ping, YANG Wei-jun, JIN Zhe, et al. The pneumatic simulation platform for the brake system of high speed train[J]. Railway Locomotive and Car, 2011, 31(5): 89-92. (in Chinese). https://www.cnki.com.cn/Article/CJFDTOTAL-TDJC201105024.htm
|
| [5] |
伍智敏, 任利惠, 裴玉春, 等. 地铁列车制动系统的中继阀性能仿真[J]. 城市轨道交通研究, 2011, 14(9): 52-57. https://www.cnki.com.cn/Article/CJFDTOTAL-GDJT201109019.htm
WU Zhi-min, REN Li-hui, PEI Yu-chun, et al. Simulation of relay-valve of metro braking system performance[J]. Urban Mass Transit, 2011, 14(9): 52-57. (in Chinese). https://www.cnki.com.cn/Article/CJFDTOTAL-GDJT201109019.htm
|
| [6] |
杨璨, 倪文波, 蒋冬清, 等. 基于AMESim的120紧急阀的建模及仿真分析[J]. 铁道机车车辆, 2009, 29(6): 37-39, 49. https://www.cnki.com.cn/Article/CJFDTOTAL-TDJC200906011.htm
YANG Can, NI Wen-bo, JIANG Dong-qing, et al. Modeling and simulation analysis of 120emergency valve using AMESim[J]. Railway Locomotive and Car, 2009, 29(6): 37-39, 49. (in Chinese). https://www.cnki.com.cn/Article/CJFDTOTAL-TDJC200906011.htm
|
| [7] |
陆强, 杨美传. 基于AMESim的地铁车辆空气制动系统的建模及仿真[J]. 液压气动与密封, 2011(10): 45-48. https://www.cnki.com.cn/Article/CJFDTOTAL-YYQD201110017.htm
LU Qiang, YANG Mei-chuan. Modeling and simulation methodology of pneumatic braking system in metro vehicles using AMESim[J]. Hydraulics Pneumatics and Seals, 2011(10): 45-48. (in Chinese). https://www.cnki.com.cn/Article/CJFDTOTAL-YYQD201110017.htm
|
| [8] |
廖志坚, 刘争平, 王月明. 基于AMESim的动车组制动防滑系统自定义建模与仿真[J]. 电力机车与城轨车辆, 2012, 35(4): 29-32. https://www.cnki.com.cn/Article/CJFDTOTAL-DJJI201204010.htm
LIAO Zhi-jian, LIU Zheng-ping, WANG Yue-ming. Custom modeling and simulation for anti-skid braking system of EMUs based on AMESim[J]. Electric Locomotives and Mass Transit Vehicles, 2012, 35(4): 29-32. (in Chinese). https://www.cnki.com.cn/Article/CJFDTOTAL-DJJI201204010.htm
|
| [9] |
李邦国, 范荣巍, 杨伟君, 等. 高速动车组制动防滑阀建模与仿真分析[J]. 铁道机车车辆, 2011, 31(5): 128-131. https://www.cnki.com.cn/Article/CJFDTOTAL-TDJC201105035.htm
LI Bang-guo, FAN Rong-wei, YANG Wei-jun, et al. Modeling and simulation analysis of anti-skid valve[J]. Railway Locomotive and Car, 2011, 31(5): 128-131. (in Chinese). https://www.cnki.com.cn/Article/CJFDTOTAL-TDJC201105035.htm
|
| [10] |
任翠纯, 岳旭峰. 广州地铁制动系统的设计[J]. 铁道车辆, 2000, 38(S0): 72-77. https://www.cnki.com.cn/Article/CJFDTOTAL-TDCL2000S1021.htm
REN Cui-chun, YUE Xu-feng. Design of braking system of Guangzhou metro[J]. Rolling Stock, 2000, 38(S0): 72-77. (in Chinese). https://www.cnki.com.cn/Article/CJFDTOTAL-TDCL2000S1021.htm
|
| [11] |
吴新宇. 克诺尔模拟式地铁制动系统概述[J]. 铁道车辆, 2000, 38(S0): 78-81. https://www.cnki.com.cn/Article/CJFDTOTAL-TDCL2000S1022.htm
WU Xin-yu. General introduction to Knorr analog type metro braking system[J]. Rolling Stock, 2000, 38(S0): 78-81. (inChinese). https://www.cnki.com.cn/Article/CJFDTOTAL-TDCL2000S1022.htm
|
| [12] |
刘海丽, 李华聪. 液压机械系统建模仿真软件AMESim及其应用[J]. 机床与液压, 2006, 34(6): 124-126. https://www.cnki.com.cn/Article/CJFDTOTAL-JCYY200606043.htm
LIU Hai-li, LI Hua-cong. Modeling and simulation software AMESim and its application for hydraulic-mechanic system[J]. Machine Tool and Hydraulics, 2006, 34(6): 124-126. (in Chinese). https://www.cnki.com.cn/Article/CJFDTOTAL-JCYY200606043.htm
|
| [13] |
边心文, 赵翼翔, 陈新度. 基于AMESim优化功能的参数识别法建模研究[J]. 机床与液压, 2011, 39(21): 121-124. https://www.cnki.com.cn/Article/CJFDTOTAL-JCYY201121035.htm
BIAN Xin-wen, ZHAO Yi-xiang, CHEN Xin-du. Study on modeling with parameter identification method based on optimization function of AMESim[J]. Machine Tool and Hydraulics, 2011, 39(21): 121-124. (in Chinese). https://www.cnki.com.cn/Article/CJFDTOTAL-JCYY201121035.htm
|
| [14] |
KAMIN′SKI Z. Mathematical modelling of the pneumatic relay emergency valve for dual-line agricultural trailer braking systems[J]. Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering, 2011, 226(5): 603-612.
|
| [15] |
戚壮, 李芾, 丁军君. 货车极限黏着制动优化方法[J]. 交通运输工程学报, 2012, 12(6): 35-40. http://transport.chd.edu.cn/article/id/201206006
QI Zhuang, LI Fu, DING Jun-jun. Braking optimization method of wagon under limit adhesion[J]. Journal of Traffic and Transportation Engineering, 2012, 12(6): 35-40. (in Chinese). http://transport.chd.edu.cn/article/id/201206006
|
Copyright《Journal of Traffic and Transportation Engineering》编辑部陕ICP备05001904号-1
Address ：Editorial Department of Journal of Traffic and Transportation Engineering, Chang 'an University, Middle Section of South Second Ring Road, Xi 'an, Shaanxi（710064） Tel：029-82334388 Email：jygc@chd.edu.cn
All visit:Today's visit:
Supported by:
Beijing Renhe Information Technology Co. Ltd
DownLoad:
