WU Yan, WANG Jian-jun, CAO Guang-bin, LIANG Guo-hua. Calculation method of anti-glare plate height on concave vertical curve section[J]. Journal of Traffic and Transportation Engineering, 2013, 13(2): 86-91. doi: 10.19818/j.cnki.1671-1637.2013.02.013
Citation: WU Yan, WANG Jian-jun, CAO Guang-bin, LIANG Guo-hua. Calculation method of anti-glare plate height on concave vertical curve section[J]. Journal of Traffic and Transportation Engineering, 2013, 13(2): 86-91. doi: 10.19818/j.cnki.1671-1637.2013.02.013

Calculation method of anti-glare plate height on concave vertical curve section

doi: 10.19818/j.cnki.1671-1637.2013.02.013
More Information
  • Author Bio:

    WU Yan(1983-), female, lecturer, doctoral student, +86-29-82334850, candycandy1212@163.com

    WANG Jianrjun(1970-), male, professor, PhD, +86-29-82334850, wjjun16@163.com

  • Received Date: 2012-09-20
  • Publish Date: 2013-04-25
  • The relationships among glare, driver sight and anti-glare plate height on straight section and concave vertical curve section were analyzed. The parameters such as the radius of concave vertical curve section, car headlamp height, driver sight height, cross-section structure and medial divider width were considered, and the calculation method of anti-glare plate height on concave vertical curve section was put out. The design height of anti-glare plate on Jinghua Expressway was taken as a case, the example verification was carried out, and the calculation results of the proposed method and Guidelines for Design of Highway Safety Facilities(JTG/T D81—2006) were compared.Research result shows that when the lamp distance of car headlamp is 120 m and the radius of concave vertical curve section is 12 000-32 000 m, the design height of anti-glare plate is 1.712 m by using the existing specification.By using the proposed method, the minimum design height of anti-glare plate is 1.720 m and the maximum design height of anti-glare plate is 1.800 m.

     

  • loading
  • [1]
    MAINSTER M A, TURNER P L. Glare's causes, consequences and clinical challenges after a century of ophthalmicstudy[J]. American Journal of Ophthalmology, 2012, 153(4): 587-593. doi: 10.1016/j.ajo.2012.01.008
    [2]
    FERNANDES L C. Absorptive and tinted contact lens for reduction of glare[J]. International Congress Series, 2005(1282): 534-538.
    [3]
    GRAY R, HILL W, NEUMAN B, et al. Effects of a blue light-filtering intraocular lens on driving safety in glare conditions[J]. Journal of Cataract and Refractive Surgery, 2012, 38(5): 816-822. doi: 10.1016/j.jcrs.2011.11.047
    [4]
    HAMMOND B R, FLETCHER L M, ELLIOTT J G. Glare disability, photostress recovery, and chromatic contrast: relation to macular pigment and serum lutein and zeaxanthin[J]. Investigative Ophthalmology and Visual Science, 2013, 54(1): 476-481. doi: 10.1167/iovs.12-10411
    [5]
    WANG Fu-jian, EASA S M. Validation of perspective-view concept for estimating road horizontal curvature[J]. Journal of Transportation Engineering, 2009, 135(2): 74-80. doi: 10.1061/(ASCE)0733-947X(2009)135:2(74)
    [6]
    MOK J H, LANDPHAIR H C, HADERI J R. Landscape improvement impacts on roadside safety in Texas[J]. Landscape and Urban Planning, 2006, 78(3): 263-274. doi: 10.1016/j.landurbplan.2005.09.002
    [7]
    XIAO Dai-quan, MA Rong-guo, LI Tie-qiang. Requirements of anti-glare effect of median virescence under different conditions[J]. Journal of Highway and Transportation Researchand Development, 2010, 27(10): 133-137. (in Chinese). doi: 10.3969/j.issn.1002-0268.2010.10.023
    [8]
    XIAO Dai-quan, MA Rong-guo, LI Tie-qiang. Anti-glareeffect of median green belt on high-grade highway[J]. Journal of Southwest Jiaotong University, 2010, 45(3): 470-475. (inChinese). doi: 10.3969/j.issn.0258-2724.2010.03.026
    [9]
    YUAN Li, LU Jian, ZHU Lei-lei, et al. Research on the indexes and evaluation method of expressway green landscape[J]. Journal of Highway and Transportation Research and Development, 2007, 24(3): 150-153. (in Chinese). doi: 10.3969/j.issn.1002-0268.2007.03.036
    [10]
    TANG Qiang, XUE Zhi-jie, SHI Ping, et al. Planting design of mid compartition strip on expressway and establishing formulas of preventing dizzy for vehicles[J]. Journal of Shenyang Agricultural University, 2005, 36(4): 466-470. (inChinese). doi: 10.3969/j.issn.1000-1700.2005.04.020
    [11]
    YANG Chun-feng, XIAO Jin-lin, SUN Ji-shu. The study of the highway glare plate height under mixed traffic[J]. Applied Mechanics and Materials, 2012, 193/194: 1017-1020. doi: 10.4028/www.scientific.net/AMM.193-194.1017
    [12]
    PARK Y J, SACCOMANNO F F. Evaluating speed consistency between successive elements of a two lane rural highway[J]. Transportation Research Part A: Policy and Practice, 2006, 40(5): 375-385. doi: 10.1016/j.tra.2005.08.003
    [13]
    MU Hui, YANG Shao-wei. Alignment design of curved section of highway[J]. Journal of Chang'an University: Natural Science Edition, 2007, 27(2): 26-29. (in Chinese). doi: 10.3321/j.issn:1671-8879.2007.02.006
    [14]
    YANG Shao-wei, SHI Fei-rong, PAN Bing-hong, et al. Application of possible velocity in design for highway alignment[J]. Journal of Chang'an University: Natural Science Edition, 2004, 24(3): 1-4. (in Chinese). https://www.cnki.com.cn/Article/CJFDTOTAL-XAGL200403001.htm
    [15]
    WANG Zhou-yan. Vehicle headlamp testing instrument integrated with technology[D]. Hangzhou: Zhejiang University, 2007. (in Chinese).

Catalog

    Article Metrics

    Article views (796) PDF downloads(1004) Cited by()
    Related

    /

    DownLoad:  Full-Size Img  PowerPoint
    Return
    Return