XU Zi-qiang, LUO Shi-hui, MA Wei-hua, WU Qing. Influence of locomotive key parameters on coupler rotation angle and locomotive running safety[J]. Journal of Traffic and Transportation Engineering, 2013, 13(3): 47-52. doi: 10.19818/j.cnki.1671-1637.2013.03.007
Citation: XU Zi-qiang, LUO Shi-hui, MA Wei-hua, WU Qing. Influence of locomotive key parameters on coupler rotation angle and locomotive running safety[J]. Journal of Traffic and Transportation Engineering, 2013, 13(3): 47-52. doi: 10.19818/j.cnki.1671-1637.2013.03.007

Influence of locomotive key parameters on coupler rotation angle and locomotive running safety

doi: 10.19818/j.cnki.1671-1637.2013.03.007
More Information
  • Author Bio:

    XU Zi-qiang(1984-), male, doctoral student, +86-28-87601973, 87602193@163.com

    LUO Shi-hui(1964-), male, professor, PhD, +86-28-86466203, shluo@swjtu.edu.cn

  • Received Date: 2012-12-18
  • Publish Date: 2013-06-25
  • Aimed at coupler rotation performance under compressive condition, the relationship between locomotive structure parameters and coupler rotation angle was analyzed, a train dynamics model consisting of three new-type 33 t axle-load C0-C0 configuration heary-haul locomotives and two round-pin coupler systems with coupler shoulder characteristic and hysteretic draft gear was established, and the effect of locomotive key structure parameters on coupler rotation angle and train running performance was studied under compressive condition.Calculation result shows that when coupler free rotation angle is 8°, its actual rotation angle is less than 8° under longitudinal compression, coupler shoulder does not work, the coupler-stabilized force is provided by secondary stop, so locomotive suffers a significant lateral component force, which leads to wheelset lateral force out of limit. Increasing the clearance of secondary stop or decreasing the distance between front and rear stops can increase the rotation angle of coupler, decrease wheelset lateral force, at last improve the running safety of train. So the matching relationship between locomotive key structure parameters and coupler free rotation angle should be considered in the selecting couplers of heavy-haul train.

     

  • loading
  • [1]
    MA Wei-hua, LUO Shi-hui, SONG Rong-rong. Coupler dynamic performance analysis of heavy haul locomotives[J]. Vehicle System Dynamics, 2012, 50(9): 1435-1452. doi: 10.1080/00423114.2012.667134
    [2]
    杨俊杰, 刘建新, 罗世辉, 等. 重载组合列车机车车钩稳定控制试验[J]. 西南交通大学学报, 2009, 44(6): 882-886. doi: 10.3969/j.issn.0258-2724.2009.06.015

    YANG Jun-jie, LIU Jian-xin, LUO Shi-hui, et al. Test study on stability control of locomotive coupler in heavy hual combined train[J]. Journal of Southwest Jiaotong University, 2009, 44(6): 882-886. (in Chinese). doi: 10.3969/j.issn.0258-2724.2009.06.015
    [3]
    MA Wei-hua, LUO Shi-hui, SONG Rong-rong. Dynamics characteristic analysis of coupler and buffer system of heavy haul train[C]//International Heavy Haul Association. The2011IHHA Specialist Technical Session. Calgary: International Heavy Haul Association, 2011: 162-168.
    [4]
    中国铁道科学研究院. HX D 2型机车装用DFC-E100型钩缓装置试验总结报告[R]. 北京: 中国铁道科学研究院, 2008.

    China Academy of Railway Sciences. The test report on DFC-E100coupler systems in HX D 2locomotive[R]. Beijing: China Academy of Railway Sciences, 2008. (in Chinese).
    [5]
    Transportation Safety Board of Canada. Railway investigation report R02C0050[R]. Ottawa: Transportation Safety Board of Canada, 2002.
    [6]
    CHERKASHIN U M, ZAKHAROV S M, SEMECHKIN A E. An overview of rolling stock and track monitoring systems and guidelines to provide safety of heavy and long train operation in the Russian railways[J]. Proceedings of the Institution of Mechanical Engineers, Part F: Journal of Rail and Rapid Transit, 2009, 223(2): 199-208. doi: 10.1243/09544097JRRT226
    [7]
    GEIKE T. Understanding high coupler forces at metro vehicles[J]. Vehicle System Dynamics, 2007, 45(4): 389-396. doi: 10.1080/00423110701215085
    [8]
    阳光武, 肖守讷, 张卫华. 列车曲线上制动时的安全性分析[J]. 铁道学报, 2009, 31(1): 35-39. https://www.cnki.com.cn/Article/CJFDTOTAL-TDXB200901009.htm

    YANG Guang-wu, XIAO Shou-ne, ZHANG Wei-hua. Analysis on safety of train braking on curves[J]. Journal of the China Railway Society, 2009, 31(1): 35-39. (in Chinese). https://www.cnki.com.cn/Article/CJFDTOTAL-TDXB200901009.htm
    [9]
    El-SIBAIE M. Recent advancements in buff and draft testing techniques[C]//China Railway Society. Fifth International Heavy Haul Railway Conference. Bejing: China Railway Society, 1993: 115-119.
    [10]
    COLE C. Improvements to wagon connection modelling for longitudinal train simulation[C]//OGHANNA W. Conference on Railway Engineering Proceedings: Engineering Innovation for a Competitive Edge. Rockhampton: Central Queensland University, 1998: 187-194.
    [11]
    COLE C, SUN Y Q. Simulated comparisons of wagon couplersystems in heavy haul trains[J]. Proceedings of the Institution of Mechanical Engineers, Part F: Journal of Rail and Rapid Transit, 2006, 220(3): 247-256. doi: 10.1243/09544097JRRT35
    [12]
    王开云, 翟婉明, 封全保, 等. 重载机车车钩自由角对轮轨动态安全性能的影响[J]. 中国铁道科学, 2009, 30(6): 72-76. https://www.cnki.com.cn/Article/CJFDTOTAL-ZGTK200906013.htm

    WANG Kai-yun, ZHAI Wan-ming, FENG Quan-bao, et al. Effect of the coupler free angle on wheel/rail dynamic safety performance of heavy haul locomotive[J]. China Railway Science, 2009, 30(6): 72-76. (in Chinese). https://www.cnki.com.cn/Article/CJFDTOTAL-ZGTK200906013.htm
    [13]
    马卫华, 宋荣荣, 揭长安, 等. 缓冲器阻抗特性对重载列车动力学性能的影响[J]. 交通运输工程学报, 2011, 11(2): 59-64. http://transport.chd.edu.cn/article/id/201102010

    MA Wei-hua, SONG Rong-rong, JIE Chang-an, et al. Influences of buffer impedance characteristics on dynamics performances for heavy haul train[J]. Journal of Traffic and Transportation Engineering, 2011, 11(2): 59-64. (in Chinese). http://transport.chd.edu.cn/article/id/201102010
    [14]
    马卫华, 杨俊杰, 罗世辉, 等. SS3B电力机车长大下坡道稳钩能力分析[J]. 铁道学报, 2010, 32(2): 109-113. https://www.cnki.com.cn/Article/CJFDTOTAL-TDXB201002021.htm

    MA Wei-hua, YANG Jun-jie, LUO Shi-hui, et al. Study on the coupler stability of locomotive SS3B running on the long heavy down grade[J]. Journal of the China Railway Society, 2010, 32(2): 109-113. (in Chinese). https://www.cnki.com.cn/Article/CJFDTOTAL-TDXB201002021.htm
    [15]
    吴庆, 罗世辉, 魏冲锋, 等. 货运机车车钩缓冲装置动力学仿真模型[J]. 交通运输工程学报, 2012, 12(3): 37-43. http://transport.chd.edu.cn/article/id/201203005

    WU Qing, LUO Shi-hui, WEI Chong-feng, et al. Dynamics simulation models of coupler systems for freight locomotive[J]. Journal of Traffic and Transportation Engineering, 2012, 12(3): 37-43. (in Chinese). http://transport.chd.edu.cn/article/id/201203005
    [16]
    杨俊杰. "1+1"两万吨组合列车模式下机车钩缓装置的承载特性与结构参数优化研究[D]. 北京: 北京交通大学, 2010.

    YANG Jun-jie. Study on carrying characteristic and parameter optimization of locomotive coupler-draft gear based on"1+1"20kt combined train mode[D]. Beijing: Beijing Jiaotong University, 2010. (in Chinese).
  • 加载中

Catalog

    通讯作者: 陈斌, bchen63@163.com
    • 1. 

      沈阳化工大学材料科学与工程学院 沈阳 110142

    1. 本站搜索
    2. 百度学术搜索
    3. 万方数据库搜索
    4. CNKI搜索

    Article Metrics

    Article views (747) PDF downloads(804) Cited by()
    Proportional views
    Related

    /

    DownLoad:  Full-Size Img  PowerPoint
    Return
    Return