Volume 15 Issue 1
. 
Turn off MathJax
Article Contents
Article Navigation >  Journal of Traffic and Transportation Engineering  > 2015  >  15(1): 82-91
ZHENG Shu-yang, JIN Chun, LUO Wei-dong. Power matching control strategy of power source for mine truck[J]. Journal of Traffic and Transportation Engineering, 2015, 15(1): 82-91. doi: 10.19818/j.cnki.1671-1637.2015.01.011
Citation: ZHENG Shu-yang, JIN Chun, LUO Wei-dong. Power matching control strategy of power source for mine truck[J]. Journal of Traffic and Transportation Engineering, 2015, 15(1): 82-91. doi: 10.19818/j.cnki.1671-1637.2015.01.011
shu

Power matching control strategy of power source for mine truck

doi: 10.19818/j.cnki.1671-1637.2015.01.011

  • School of Mechanical Engineering, University of Science and Technology Beijing, Beijing 100083, China

More Information
  • Author Bio:

    ZHENG Shuryang(1986-), male, doctoral student, + 86-10-62332467, 59708858 qq.com

    JIN Chun(1975-), male, associate professor, PhD, + 86-10-82375949, jinjinbit@163.com

  • Received Date: 2014-08-23
  • Publish Date: 2015-02-25
    Abstract
  • Considering that the working points of mine truck engine were distributed in low efficiency area, the AC(alternating current)drive control strategy based on power matching was designed, and the output power was adjusted by transmission system according to different driving cycles.The power region of electric drive system was determined.Vehicle load degree was introduced to evaluate load degrees of different driving cycles.A three-layer hierarchical control strategy was proposed.The rotational speeds of in-wheel motor were pretreated by using moving average filter algorithm, and vehicle load degrees were calculated in the upper algorithm.In the middle algorithm, the reference power was calculated with vehicle load degree and engine speed, and a three-dimensional fuzzy controller was used in the middle algorithm.In the lower algorithm, the reference power was tracked by driving system to realize power matching of mine truck.The electric drive test bench was built, and the effect of power matching control strategy was verified.Verification result indicates that by using power matching control strategy, the change of load degrees can be quickly identified for common driving cycles of starting, climbing, sudden loading and downhill.The driving power of current load is calculated, which can guarantee the dynamic performance of mine truck in complicated working conditions.The oil saving effect of control strategy for mine truck is examined by steady test, and the working points of engine locate nearby the optimum fuel economy curve.Compared with the maximum power satisfied strategy, the fuel consumption of power matching control strategy reduces by 10.8%for load of 40 kW, and 4.8% for load of 80 kW, so the effectiveness and feasibility of control strategy are validated.

     

    • FullText(HTML)
  • loading
    • References(25)
  • [1]
    李晓英, 于秀敏, 李君, 等. 串联混合动力汽车控制策略[J]. 吉林大学学报: 工学版, 2005, 35(2): 122-126. https://www.cnki.com.cn/Article/CJFDTOTAL-JLGY200502002.htm

    LI Xiao-ying, YU Xiu-min, LI Jun, et al. Control strategy for series hybrid-power vehicle[J]. Journal of Jilin University: Engineering and Technology Edition, 2005, 35(2): 122-126. (in Chinese) https://www.cnki.com.cn/Article/CJFDTOTAL-JLGY200502002.htm
    [2]
    彭武, 张俊智, 卢青春. 混合动力电动公共汽车控制策略的仿真[J]. 公路交通科技, 2003, 20(1): 148-150, 154. doi: 10.3969/j.issn.1002-0268.2003.01.038

    PENG Wu, ZHANG Jun-zhi, LU Qing-chun. Simulation on the control strategy of hybrid electric bus[J]. Journal of Highway and Transportation Research and Development, 2003, 20(1): 148-150, 154. (in Chinese) doi: 10.3969/j.issn.1002-0268.2003.01.038
    [3]
    CHAN C C. An overview of electric vehicle technology[J]. Proceedings of the IEEE, 1993, 81(9): 1202-1213. doi: 10.1109/5.237530
    [4]
    CHAN C C. The state of the art of electric and hybrid vehicles[J]. Proceedings of the IEEE, 2002, 90(2): 247-275. doi: 10.1109/5.989873
    [5]
    王磊, 张勇, 舒杰, 等. 基于模糊自适应滑模方法的混联式混合动力客车模式切换协调控制[J]. 机械工程学报, 2012, 48(14): 119-127. https://www.cnki.com.cn/Article/CJFDTOTAL-JXXB201214019.htm

    WANG Lei, ZHANG Yong, SHU Jie, et al. Mode transition control for series-parallel hybrid electric bus using fuzzy adaptive sliding mode approach[J]. Journal of Mechanical Engineering, 2012, 48(14): 119-127. (in Chinese) https://www.cnki.com.cn/Article/CJFDTOTAL-JXXB201214019.htm
    [6]
    MURPHEY Y L, PARK J, CHEN Z, et al. Intelligent hybrid vehicle power control―Part Ⅰ: machine learning of optimal vehicle power[J]. IEEE Transactions on Vehicular Technology, 2012, 61(8): 3519-3530. doi: 10.1109/TVT.2012.2206064
    [7]
    MURPHEY Y L, PARK J, KILIARIS L, et al. Intelligent hybrid vehicle power control―Part Ⅱ: online intelligent energy management[J]. IEEE Transactions on Vehicular Technology, 2013, 62(1): 69-79. doi: 10.1109/TVT.2012.2217362
    [8]
    JOHANNESSON L, PETTERSSON S, EGARDT B, et al. Predictive energy management of a 4QT series-parallel hybrid electric bus[J]. Control Engineering Practice, 2009, 17(7): 1440-1453.
    [9]
    林巨广, 顾杰, 朱茂飞. 基于驾驶意图模糊识别的PHEV输出转矩控制的研究[J]. 汽车工程, 2012, 34(11): 984-989. doi: 10.3969/j.issn.1000-680X.2012.11.005

    LIN Ju-guang, GU Jie, ZHU Mao-fei. A study on PHEV output torque control based on fuzzy recognition of driver's intention[J]. Automotive Engineering, 2012, 34(11): 984-989. (in Chinese) doi: 10.3969/j.issn.1000-680X.2012.11.005
    [10]
    孙以泽, 王其明. 车辆AMT中道路条件及驾驶意图的模糊识别[J]. 汽车工程, 2001, 23(6): 419-422. doi: 10.3321/j.issn:1000-680X.2001.06.015

    SUN Yi-ze, WANG Qi-ming. Fuzzy discernment of the driving environment and the driving intention in AMT[J]. Automotive Engineering, 2001, 23(6): 419-422. (in Chinese) doi: 10.3321/j.issn:1000-680X.2001.06.015
    [11]
    邱铁, 徐子川, 江贺. 基于模糊控制的智能车路况识别[J]. 计算机工程与应用, 2009, 45(14): 213-216. doi: 10.3778/j.issn.1002-8331.2009.14.066

    QIU Tie, XU Zi-chuan, JIANG He. Smartcar road status recognition based on fuzzy control[J]. Computer Engineering and Applications, 2009, 45(14): 213-216. (in Chinese) doi: 10.3778/j.issn.1002-8331.2009.14.066
    [12]
    邹渊, 陈锐, 侯仕杰, 等. 基于随机动态规划的混合动力履带车辆能量管理策略[J]. 机械工程学报, 2012, 48(14): 91-96. https://www.cnki.com.cn/Article/CJFDTOTAL-JXXB201214015.htm

    ZOU Yuan, CHEN Rui, HOU Shi-jie, et al. Energy management strategy for hybrid electric tracked vehicle based on stochastic dynamic programming[J]. Journal of Mechanical Engineering, 2012, 48(14): 91-96. (in Chinese) https://www.cnki.com.cn/Article/CJFDTOTAL-JXXB201214015.htm
    [13]
    林歆悠, 孙东野, 尹燕莉, 等. 基于随机动态规划的混联式混合动力客车能量管理策略[J]. 汽车工程, 2012, 34(9): 830-836, 858. doi: 10.3969/j.issn.1000-680X.2012.09.013

    LIN Xin-you, SUN Dong-ye, YIN Yan-li, et al. The energy management strategy for a series-parallel hybrid electric bus based on stochastic dynamic programming[J]. Automotive Engineering, 2012, 34(9): 830-836, 858. (in Chinese) doi: 10.3969/j.issn.1000-680X.2012.09.013
    [14]
    TATE E D, GRIZZLE J W, PENG H. Shortest path sto-chastic control for hybrid electric vehicles[J]. International Journal of Robust and Nonlinear Control, 2008, 14(18): 1409-1429.
    [15]
    刘洪波, 雷雨龙, 傅尧, 等. 基于转矩的车辆负载识别方法[J]. 吉林大学学报: 工学版, 2012, 42(5): 1107-1112. https://www.cnki.com.cn/Article/CJFDTOTAL-JLGY201205007.htm

    LIU Hong-bo, LEI Yu-long, FU Yao, et al. Torque-based vehicle load recognition method[J]. Journal of Jilin University: Engineering and Technology Edition, 2012, 42(5): 1107-1112. (in Chinese) https://www.cnki.com.cn/Article/CJFDTOTAL-JLGY201205007.htm
    [16]
    张泰, 葛安林, 唐春学, 等. 越野汽车机械自动变速器换挡规律的自适应控制[J]. 农业机械学报, 2006, 37(4): 5-8. https://www.cnki.com.cn/Article/CJFDTOTAL-NYJX200604002.htm

    ZHANG Tai, GE An-lin, TANG Chun-xue, et al. Shift schedule self-adaptive control of off-road vehicle automated mechanical transmission[J]. Transactions of the Chinese Society for Agricultural Machinery, 2006, 37(4): 5-8. (in Chinese) https://www.cnki.com.cn/Article/CJFDTOTAL-NYJX200604002.htm
    [17]
    张泰, 葛安林, 郭立书, 等. 基于车辆负荷度的换挡规律研究[J]. 农业机械学报, 2004, 35(3): 9-12. https://www.cnki.com.cn/Article/CJFDTOTAL-NYJX200403002.htm

    ZHANG Tai, GE An-lin, GUO Li-shu, et al. Shift schedule based on vehicle loading[J]. Transactions of the Chinese Society for Agricultural Machinery, 2004, 35(3): 9-12. (in Chinese) https://www.cnki.com.cn/Article/CJFDTOTAL-NYJX200403002.htm
    [18]
    金辉, 李磊, 李斌虎, 等. 基于加速度区间判断的坡道识别方法[J]. 中国公路学报, 2010, 23(1): 122-126. https://www.cnki.com.cn/Article/CJFDTOTAL-ZGGL201001023.htm

    JIN Hui, LI Lei, LI Bin-hu, et al. Slope recognition method based on acceleration interval judgment[J]. China Journal of Highway and Transport, 2010, 23(1): 122-126. (in Chinese) https://www.cnki.com.cn/Article/CJFDTOTAL-ZGGL201001023.htm
    [19]
    雷雨龙, 付尧, 刘科, 等. 基于扩展卡尔曼滤波的车辆质量与道路坡度估计[J]. 农业机械学报, 2014, 45(11): 9-13, 8. https://www.cnki.com.cn/Article/CJFDTOTAL-NYJX201411002.htm

    LEI Yu-long, FU Yao, LIU Ke, et al. Vehicle mass and road grade estimation based on extended Kalman filter[J]. Transactions of the Chinese Society for Agricultural Machinery, 2014, 45(11): 9-13, 8. (in Chinese) https://www.cnki.com.cn/Article/CJFDTOTAL-NYJX201411002.htm
    [20]
    王玉海, 董瑞先, 王松, 等. 基于SAE J1939协议的重型车辆坡道识别实时算法[J]. 汽车工程, 2010, 32(7): 640-642, 647. https://www.cnki.com.cn/Article/CJFDTOTAL-QCGC201007021.htm

    WANG Yu-hai, DONG Rui-xian, WANG Song, et al. Real-time road slope recognition algorithm for heavy truck based SAE J1939 protocol[J]. Automotive Engineering, 2010, 32(7): 640-642, 647. (in Chinese) https://www.cnki.com.cn/Article/CJFDTOTAL-QCGC201007021.htm
    [21]
    金辉, 葛安林, 秦贵和, 等. 基于纵向动力学的坡道识别方法研究[J]. 机械工程学报, 2002, 38(1): 79-86. https://www.cnki.com.cn/Article/CJFDTOTAL-JXXB200201018.htm

    JIN Hui, GE An-lin, QIN Gui-he, et al. Study on slope recognition method based on vehicle's longitudinal dynamics[J]. Journal of Mechanical Engineering, 2002, 38(1): 79-86. (in Chinese) https://www.cnki.com.cn/Article/CJFDTOTAL-JXXB200201018.htm
    [22]
    尚涛, 赵丁选, 肖英奎, 等. 液压挖掘机功率匹配节能控制系统[J]. 吉林大学学报: 工学版, 2004, 34(4): 592-596. https://www.cnki.com.cn/Article/CJFDTOTAL-JLGY200404015.htm

    SHANG Tao, ZHAO Ding-xuan, XIAO Ying-kui, et al. Power matching for energy-saving control system of hydraulic excavators[J]. Journal of Jilin University: Engineering and Technology Edition, 2004, 34(4): 592-596. (in Chinese) https://www.cnki.com.cn/Article/CJFDTOTAL-JLGY200404015.htm
    [23]
    王东云, 管成, 潘双夏, 等. 液压挖掘机功率匹配与动力源优化综合控制策略[J]. 农业机械学报, 2009, 40(4): 91-95. https://www.cnki.com.cn/Article/CJFDTOTAL-NYJX200904020.htm

    WANG Dong-yun, GUAN Cheng, PAN Shuang-xia, et al. Control strategy of power matching and power sources optimization for hydraulic excavators[J]. Transactions of the Chinese Society for Agricultural Machinery, 2009, 40(4): 91-95. (in Chinese) https://www.cnki.com.cn/Article/CJFDTOTAL-NYJX200904020.htm
    [24]
    PARK J, CHEN Zhi-hang, KILIARIS L, et al. Intelligent vehicle power control based on machine learning of optimal control parameters and prediction of road type and traffic congestion[J]. IEEE Transactions on Vehicular Technology, 2009, 58(9): 4741-4756.
    [25]
    YUAN Xi-bo, WANG Jia-bin. Torque distribution strategy for a front-and rear-wheel-driven electric vehicle[J]. IEEE Transactions on Vehicular Technology, 2012, 61(8): 3365-3374.
    • Relative Articles
    • Supplements(0)
    • Cited By
  • 加载中

Catalog

    通讯作者: 陈斌, bchen63@163.com
    • 1. 

      沈阳化工大学材料科学与工程学院 沈阳 110142

    1. 本站搜索
    2. 百度学术搜索
    3. 万方数据库搜索
    4. CNKI搜索
    Get Citation
    PDF
    XML

    Article Metrics

    Article views (595) PDF downloads(13007) Cited by()
    Proportional views
    Related

    Copyright《Journal of Traffic and Transportation Engineering》编辑部陕ICP备05001904号-1

    Address ：Editorial Department of Journal of Traffic and Transportation Engineering, Chang 'an University, Middle Section of South Second Ring Road, Xi 'an, Shaanxi（710064） Tel：029-82334388 Email：jygc@chd.edu.cn

    All visit:Today's visit:

    Supported by: Beijing Renhe Information Technology Co. Ltd    

    /

    DownLoad:  Full-Size Img  PowerPoint
    Return
    Return