ZHANG Feng, LI Shu-cai, LI Hong-jiang, YAO Chen, YANG Sheng. Shearing performances of corrugated steel webs encased with concrete[J]. Journal of Traffic and Transportation Engineering, 2016, 16(1): 16-24. doi: 10.19818/j.cnki.1671-1637.2016.01.003
Citation: ZHANG Feng, LI Shu-cai, LI Hong-jiang, YAO Chen, YANG Sheng. Shearing performances of corrugated steel webs encased with concrete[J]. Journal of Traffic and Transportation Engineering, 2016, 16(1): 16-24. doi: 10.19818/j.cnki.1671-1637.2016.01.003

Shearing performances of corrugated steel webs encased with concrete

doi: 10.19818/j.cnki.1671-1637.2016.01.003
More Information
  • Author Bio:

    ZHANG Feng (1978-), male, associate professor, PhD, +86-531-88395428, zhangfeng2008@sdu.edu.cn

  • Received Date: 2015-10-11
  • Publish Date: 2016-02-25
  • In order to study the shearing behavior of corrugated steel webs encased with concrete, the nonlinear-refined-numerical finite element model of corrugated steel webs encased with concrete was established, and its validity was verified by using the deflection and strain of test model.The shearing mechanism of corrugated steel webs encased with concrete was analyzed, the ratio of loads shared by concrete and corrugated steel webs was studied, and the shearing strength design formula of corrugated steel webs encased with concrete was presented and verified.Analysis result shows that the load capacities of numerical model and test model are 4 560 kN and4 744 kN respectively, the simulation error is 3.8%, so the finite element model is feasible.The steel webs'tension strut and the concrete's compression strut form X-type truss, and the shearing strength of corrugated steel webs encased with concrete is their sum.The shearing resistance of corrugated steel webs is basically linear relation with load.The shearing resistance of concrete encasement shows three polylines, it increases fast at the initial and late stage of loading, and scarcely changes at the middle stage of loading.The calculated result of presented formula ofshearing strength agrees with the model test result, the maximum ratio of shearing strength is1.1, so the formula is feasible and can be used to analyze for the shearing properties of corrugated steel webs encased with concrete.

     

  • loading
  • [1]
    JIANG Rui-juan, AU F T K, XIAO Yu-feng. Prestressed concrete girder bridges with corrugated steel webs: review[J]. Journal of Structural Engineering, 2015, 141(2): 1-9. doi: 10.1061/%28ASCE%29ST.1943-541X.0001040
    [2]
    SAYED-AHMED E Y. Behavior of steel and(or)composite girders with corrugated steel webs[J]. Canadian Journal of Civil Engineering, 2001, 28(4): 656-672. doi: 10.1139/l01-027
    [3]
    聂建国, 朱力, 唐亮. 波形钢腹板的抗剪强度[J]. 土木工程学报, 2013, 46(6): 97-109. https://www.cnki.com.cn/Article/CJFDTOTAL-TMGC201306018.htm

    NIE Jian-guo, ZHU Li, TANG Liang. Shear strength of trapezoidal corrugated steel webs[J]. China Civil Engineering Journal, 2013, 46(6): 97-109. (in Chinese). https://www.cnki.com.cn/Article/CJFDTOTAL-TMGC201306018.htm
    [4]
    SAUSE R, BRAXTAN T N. Shear strength of trapezoidal corrugated steel webs[J]. Journal of Constructional Steel Research, 2011, 67(2): 223-236. doi: 10.1016/j.jcsr.2010.08.004
    [5]
    YI J, GIL H, YOUM K, et al. Interactive shear buckling behavior of trapezoidally corrugated steel webs[J]. Engineering Structures, 2008, 30(6): 1659-1666. doi: 10.1016/j.engstruct.2007.11.009
    [6]
    MOON J, YI J, CHOI B H, et al. Shear strength and design of trapezoidally corrugated steel webs[J]. Journal of Constructional Steel Research, 2009, 65(5): 1198-1205. doi: 10.1016/j.jcsr.2008.07.018
    [7]
    GUO Tong, SAUSE R. Analysis of local elastic shear buckling of trapezoidal corrugated steel webs[J]. Journal of Constructional Steel Research, 2014, 102: 59-71. doi: 10.1016/j.jcsr.2014.06.006
    [8]
    HASSANEIN M F, KHAROOB O F. Behavior of bridge girders with corrugated webs: (Ⅱ)shear strength and design[J]. Engineering Structures, 2013, 57: 544-553. doi: 10.1016/j.engstruct.2013.04.015
    [9]
    HASSANEIN M F, KHAROOB O F. Shear buckling behavior of tapered bridge girders with steel corrugated webs[J]. Engineering Structures, 2014, 74: 157-169. doi: 10.1016/j.engstruct.2014.05.021
    [10]
    狄谨, 周绪红, 乔朋, 等. 波纹钢腹板屈曲性能[J]. 交通运输工程学报, 2009, 9(3): 11-18. doi: 10.3321/j.issn:1671-1637.2009.03.002

    DI Jin, ZHOU Xu-hong, QIAO Peng, et al. Shear buckling property of corrugated steel webs[J]. Journal of Traffic and Transportation Engineering, 2009, 9(3): 11-18. (in Chinese). doi: 10.3321/j.issn:1671-1637.2009.03.002
    [11]
    周绪红, 孔祥福, 侯健, 等. 波纹钢腹板组合箱梁的抗剪受力性能[J]. 中国公路学报, 2007, 20(2): 77-82. doi: 10.3321/j.issn:1001-7372.2007.02.015

    ZHOU Xu-hong, KONG Xiang-fu, HOU Jian, et al. Shear mechanical property of composite box girder with corrugated steel webs[J]. China Journal of Highway and Transport, 2007, 20(2): 77-82. (in Chinese). doi: 10.3321/j.issn:1001-7372.2007.02.015
    [12]
    李立峰, 侯立超, 孙君翠. 波形钢腹板抗剪性能的研究[J]. 湖南大学学报: 自然科学版, 2015, 42(1): 56-63. doi: 10.3969/j.issn.1008-1763.2015.01.008

    LI Li-feng, HOU Li-chao, SUN Jun-cui. Research on shear mechanical property of corrugated steel webs[J]. Journal of Hunan University: Natural Sciences, 2015, 42(1): 56-63. (in Chinese). doi: 10.3969/j.issn.1008-1763.2015.01.008
    [13]
    徐栋, 尼颖升, 赵瑜. 波形钢腹板梁桥空间网格分析方法[J]. 土木工程学报, 2015, 48(3): 61-70. https://www.cnki.com.cn/Article/CJFDTOTAL-TMGC201503011.htm

    XU Dong, NI Ying-sheng, ZHAO Yu. Analysis method for corrugated steel web beam bridges using spatial grid modelling[J]. China Civil Engineering Journal, 2015, 48(3): 61-70. (in Chinese). https://www.cnki.com.cn/Article/CJFDTOTAL-TMGC201503011.htm
    [14]
    张永健, 黄平明, 狄谨, 等. 波形钢腹板组合箱梁自振特性与试验研究[J]. 交通运输工程学报, 2008, 8(5): 76-80. doi: 10.3321/j.issn:1671-1637.2008.05.015

    ZHANG Yong-jian, HUANG Ping-ming, DI Jin, et al. Free vibration characteristics and experiment study of composite box girder with corrugated steel webs[J]. Journal of Traffic and Transportation Engineering, 2008, 8(5): 76-80. (in Chinese). doi: 10.3321/j.issn:1671-1637.2008.05.015
    [15]
    NAKAMURA S I, MORISHITA H. Bending strength of concrete-filled narrow-width steel box girder[J]. Journal of Constructional Steel Research, 2008, 64(1): 128-33. doi: 10.1016/j.jcsr.2007.03.001
    [16]
    HE Jun, LIU Yu-qing, CHEN Ai-rong, et al. Bending behavior of concrete-encased composite I-girder with corrugated steel web[J]. Thin-Walled Structures, 2014, 74: 70-84. doi: 10.1016/j.tws.2013.08.003
    [17]
    王达磊, 贺君, 陈艾荣, 等. 内衬混凝土波折钢腹板梁抗弯性能试验研究[J]. 同济大学学报: 自然科学版, 2012, 40(9): 1312-1317. doi: 10.3969/j.issn.0253-374x.2012.09.006

    WANG Da-lei, HE Jun, CHEN Ai-rong, et al. Experimental study on bending behavior of concrete-encased composite girder with corrugated steel web[J]. Journal of Tongji University: Natural Science, 2012, 40(9): 1312-1317. (in Chinese). doi: 10.3969/j.issn.0253-374x.2012.09.006
    [18]
    HE Jun, LIU Yu-qing, CHEN Ai-rong, et al. Shear behavior of partially encased composite I-girder with corrugated steel web: experimental study[J]. Journal of Constructional Steel Research, 2012, 77: 193-209. doi: 10.1016/j.jcsr.2012.05.005
    [19]
    HE Jun, LIU Yu-qing, LIN Zhao-fei, et al. Shear behavior of partially encased composite I-girder with corrugated steel web: numerical study[J]. Journal of Constructional Steel Research, 2012, 79: 166-182. doi: 10.1016/j.jcsr.2012.07.018
    [20]
    CHEN G M, CHEN J F, TENG J G. On the finite element modeling of RC beams shear-strengthened with FRP[J]. Construction and Building Materials, 2012, 32: 13-26. doi: 10.1016/j.conbuildmat.2010.11.101
    [21]
    LUBLINER J, OLIVER J, OLLER S, et al. A plastic-damage model for concrete[J]. International Journal of Solids and Structures, 1989, 25(3): 299-326.
    [22]
    丁发兴, 倪鸣, 龚永智, 等. 栓钉剪力连接件滑移性能试验研究及受剪承载力计算[J]. 建筑结构学报, 2014, 35(9): 98-106. https://www.cnki.com.cn/Article/CJFDTOTAL-JZJB201409013.htm

    DING Fa-xing, NI Ming, GONG Yong-zhi, et al. Experimental study on slip behavior and callculation of shear bearing capacity for shear stud connectors[J]. Journal of Building Structures, 2014, 35(9): 98-106. (in Chinese). https://www.cnki.com.cn/Article/CJFDTOTAL-JZJB201409013.htm
    [23]
    KIM S E, NGUYENH T. Finite element modeling and analysis of a hybrid steel PSC beam connection[J]. Engineering Structures, 2010, 32(9): 2557-2569. https://www.sciencedirect.com/science/article/pii/S0141029610001732
    [24]
    WANG Y C. Deflection of steel-concrete composite beams with partial shear interaction[J]. Journal of Structural Engineering, 1998, 124(10): 1159-1165. https://trid.trb.org/view.aspx?id=541140
    [25]
    OLLGAARD J G, SLUTTER R G, FISHER J W. Shear strength of stud connectors in lightweight and normal weight concrete[J]. AISC Engineering Journal, 1971, 8(2): 55-64. https://preserve.lehigh.edu/cgi/viewcontent.cgi?article=3009&context=engr-civil-environmental-fritz-lab-reports
    [26]
    NAKAMURA S I, NARITA N. Bending and shear strengths of partially encased composite I-girders[J]. Journal of Constructional Steel Research, 2003, 59(12): 1435-1453. https://www.sciencedirect.com/science/article/pii/S0143974X03001044
  • 加载中

Catalog

    通讯作者: 陈斌, bchen63@163.com
    • 1. 

      沈阳化工大学材料科学与工程学院 沈阳 110142

    1. 本站搜索
    2. 百度学术搜索
    3. 万方数据库搜索
    4. CNKI搜索

    Article Metrics

    Article views (621) PDF downloads(646) Cited by()
    Proportional views
    Related

    /

    DownLoad:  Full-Size Img  PowerPoint
    Return
    Return