Volume 18 Issue 1
. 
Turn off MathJax
Article Contents
Article Navigation >  Journal of Traffic and Transportation Engineering  > 2018  >  18(1): 71-78
LIAN Qing-lin, LIU Zhi-ming, WANG Wen-jing. Fatigue failure mechanism and improvement method of safety suspender mounting base of speed-up passenger car bogie[J]. Journal of Traffic and Transportation Engineering, 2018, 18(1): 71-78. doi: 10.19818/j.cnki.1671-1637.2018.01.007
Citation: LIAN Qing-lin, LIU Zhi-ming, WANG Wen-jing. Fatigue failure mechanism and improvement method of safety suspender mounting base of speed-up passenger car bogie[J]. Journal of Traffic and Transportation Engineering, 2018, 18(1): 71-78. doi: 10.19818/j.cnki.1671-1637.2018.01.007
shu

Fatigue failure mechanism and improvement method of safety suspender mounting base of speed-up passenger car bogie

doi: 10.19818/j.cnki.1671-1637.2018.01.007

  • School of Mechanical, Electronic and Control Engineering, Beijing Jiaotong University, Beijing 100044, China

More Information
  • Author Bio:

    LIAN Qing-lin(1991-), male, doctoral student, 15116329@bjtu.edu.cn

    LIU Zhi-ming(1966-), male, professor, PhD, zhmliu1@bjtu.edu.cnzhmliu1@bjtu.edu.cn

  • Received Date: 2017-09-13
  • Publish Date: 2018-02-25
    Abstract
  • The fatigue crack characteristics in the vicinity of bolt hole on the safety suspender mounting base of speed-up passenger car bogie were analyzed.A hypothesis was proposed that the structural vibration fatigue caused by resonant phenomena is the most important reason of the crack initiation in the position.The first 1-10 order modes' vibration shapes of safety suspender were obtained by using finite element simulation.The frequency of each order mode was analyzed.Field tests on acceleration and dynamic stress were conducted.The equivalent stresses and accelerations as well as their dominant frequencies were obtained.Field test results were compared and analyzed with FE simulation result.Based on the command of failure mechanism of safety suspender mounting base, the structure of safety suspender and the way of connection were optimized by using structure improvement and connection adjustment.Field line tests were applied to the new structures, and the safety and economy were evaluated.Analysis result showsthat because of the influence of track line conditions of normal passenger car, the vibration frequency of safety suspender, which is 91.78 Hz for acceleration and 91 Hz for dynamic stress, is very similar to the fourth order mode frequency (95.79 Hz) calculated by FE simulation, so that the resonance occurs.The longitudinal acceleration power spectral density of safety suspender is much higher than its lateral value and vertical value, which corresponds to the running direction of train, so crack initiation in the vicinity of safety suspender mounting base is resulted from vibration fatigue.The equivalent stress amplitudes can reduce effectively while placing 5 mm shims on both sides of bolt hole and altering the steel plate bending structure with flexible wire rope structure, and less fatigue damage accumulates.The improved safety suspender can meet the application requirement of running 12 million kilometers, and economic benefit is better.

     

    • FullText(HTML)
  • loading
    • References(25)
  • [1]
    姚起杭. 谈谈加速振动试验问题[J]. 航空标准化与质量, 1975 (6): 7-18. https://www.cnki.com.cn/Article/CJFDTOTAL-HKBZ197506003.htm

    YAO Qi-hang. Issue of accelerated vibration test[J]. Aeronautic Standardization and Quality, 1975 (6): 7-18. (in Chinese). https://www.cnki.com.cn/Article/CJFDTOTAL-HKBZ197506003.htm
    [2]
    姚起杭, 姚军. 工程结构的振动问题[J]. 应用力学学报, 2006, 23 (1): 12-15. doi: 10.3969/j.issn.1000-4939.2006.01.003

    YAO Qi-hang, YAO Jun. Vibration fatigue in engineering structures[J]. Chinese Journal of Applied Mechanics, 2006, 23 (1): 12-15. (in Chinese). doi: 10.3969/j.issn.1000-4939.2006.01.003
    [3]
    AYKAN M, CELIK M. Vibration fatigue analysis and multiaxial effect in testing of aerospace structures[J]. Mechanical Systems and Signal Processing, 2009, 23 (3): 897-907. doi: 10.1016/j.ymssp.2008.08.006
    [4]
    高红俐, 郑欢斌, 朱亚伦. 裂纹扩展过程中电磁谐振疲劳试验系统动态特性分析[J]. 机械工程学报, 2016, 52 (24): 88-98. https://www.cnki.com.cn/Article/CJFDTOTAL-JXXB201624010.htm

    GAO Hong-li, ZHENG Huan-bin, ZHU Ya-lun. Dynamic characteristics analysis of electromagnetic resonance fatigue testing system during the fatigue crack growing process[J]. Journal of Mechanical Engineering, 2016, 52 (24): 88-98. (in Chinese). https://www.cnki.com.cn/Article/CJFDTOTAL-JXXB201624010.htm
    [5]
    任尊松, 刘志明. 高速动车组振动传递及频率分布规律[J]. 机械工程学报, 2013, 49 (16): 1-7. https://www.cnki.com.cn/Article/CJFDTOTAL-JXXB201316002.htm

    REN Zun-song, LIU Zhi-ming. Vibration and frequency domain characteristics of high speed EMU[J]. Journal of Mechanical Engineering, 2013, 49 (16): 1-7. (in Chinese). https://www.cnki.com.cn/Article/CJFDTOTAL-JXXB201316002.htm
    [6]
    王文静, 惠晓龙, 马纪军. 高速列车设备舱支架疲劳裂纹机理研究[J]. 机械工程学报, 2015, 51 (6): 142-147. https://www.cnki.com.cn/Article/CJFDTOTAL-JXXB201506025.htm

    WANG Wen-jing, HUI Xiao-long, MA Ji-jun. Fatigue crack mechanism research on high speed train equipment cabin frame[J]. Journal of Mechanical Engineering, 2015, 51 (6): 142-147. (in Chinese). https://www.cnki.com.cn/Article/CJFDTOTAL-JXXB201506025.htm
    [7]
    刘文光, 陈国平, 贺红林, 等. 结构振动疲劳研究综述[J]. 工程设计学报, 2012, 19 (1): 1-8, 24. doi: 10.3785/j.issn.1006-754X.2012.01.001

    LIU Wen-guang, CHEN Guo-ping, HE Hong-lin, et al. Review of studying on vibration fatigue[J]. Chinese Journal of Engineering Design, 2012, 19 (1): 1-8, 24. (in Chinese). doi: 10.3785/j.issn.1006-754X.2012.01.001
    [8]
    王明珠, 姚卫星, 孙伟. 结构随机振动疲劳寿命估算的样本法[J]. 中国机械工程, 2008, 19 (8): 972-975. doi: 10.3321/j.issn:1004-132X.2008.08.021

    WANG Ming-zhu, YAO Wei-xing, SUN Wei. Sample approach for fatigue life prediction of structures under random vibration[J]. China Mechanical Engineering, 2008, 19 (8): 972-975. (in Chinese). doi: 10.3321/j.issn:1004-132X.2008.08.021
    [9]
    刘志明. 随机载荷下焊接构架疲劳寿命及可靠性研究[D]. 北京: 北京交通大学, 2001.

    LIU Zhi-ming. A research on fatigue life and reliability of welding frame under random loads[D]. Beijing: Beijing Jiaotong University, 2001. (in Chinese).
    [10]
    YU D, AL-YAFAWI A, NGUYEN T T, et al. High-cycle fatigue life prediction for Pb-free BGA under random vibration loading[J]. Microelectronics Reliability, 2011, 51 (3): 649-656. doi: 10.1016/j.microrel.2010.10.003
    [11]
    MARLOFF R H. Resonant fatigue testing of riveted joints[J]. Experimental Mechanics, 1980, 20 (2): 37-43. doi: 10.1007/BF02321032
    [12]
    韩清华, 韩飞, 王海英, 等. 飞机平尾振动疲劳试验分析[J]. 结构强度研究, 2009 (2): 4-6, 21.

    HAN Qing-hua, HAN Fei, WANG Hai-ying, et al. Analysis on vibration fatigue test for the horizontal tail of aircraft[J]. Journal of Structural Strength, 2009 (2): 4-6, 21. (in Chinese).
    [13]
    THORSEN M J, SÆVIK S, LARSEN C M. Fatigue damage from time domain simulation of combined in-line and crossflow vortex-induced vibrations[J]. Marine Structures, 2015, 41: 200-222. doi: 10.1016/j.marstruc.2015.02.005
    [14]
    MATVEEV V V, BOVSUNOVSKY A P. Vibration-based diagnostics of fatigue damage of beam-like structures[J]. Journal of Sound and Vibration, 2002, 249: 23-40. doi: 10.1006/jsvi.2001.3816
    [15]
    TSYFANSKY S L, BERESNEVICH V I. Non-linear vibration method for dection of fatigue cracks in aircraft wings[J]. Journal of Sound and Vibration, 2000, 236: 49-60. doi: 10.1006/jsvi.2000.2981
    [16]
    MRŠNIK M, SLAVIC J, BOLTEľAR M. Frequency-domain methods for a vibration-fatigue-life estimation—application to real data[J]. International Journal of Fatigue, 2013, 42 (2): 8-17.
    [17]
    JULIEN B, BERTRAND F, THIERRY Y. Probabilistic random vibration fatigue[J]. Procedia Engineering, 2013, 66: 522-529. doi: 10.1016/j.proeng.2013.12.104
    [18]
    HACK M, ZINGSHEIM F. Multiaxial load situations in random vibration fatigue-phasing and cross correlation[J]. Procedia Engineering, 2013, 66: 530-538. doi: 10.1016/j.proeng.2013.12.105
    [19]
    GAO Yun, ZONG Zhi, SUN Lei. Numerical prediction of fatigue damage in steel catenary riser due to vortex-induced vibration[J]. Journal of Hydrodynamics, 2011, 23 (2): 154-163.
    [20]
    张钊, 张万玉, 胡亚琪. 飞机结构振动疲劳分析研究进展[J]. 航空计算技术, 2012, 42 (2): 60-64, 68. https://www.cnki.com.cn/Article/CJFDTOTAL-HKJJ201202017.htm

    ZHANG Zhao, ZHANG Wan-yu, HU Ya-qi. Development of aircraft structure vibration fatigue life study[J]. Aeronautical Computing Technique, 2012, 42 (2): 60-64, 68. (in Chinese). https://www.cnki.com.cn/Article/CJFDTOTAL-HKJJ201202017.htm
    [21]
    XU Chen, FUKADA S, MASUYA H. The impact vibrationbased fatigue damage assessment of steel and steel fiber reinforced concrete composite girder[J]. International Journal of Steel Structures, 2016, 16 (4): 1217-1226. doi: 10.1007/s13296-016-0060-5
    [22]
    XU Lin, RABOTTI C, MISCHI M. Analysis of vibration exercise at varying frequencies by different fatigue estimators[J]. IEEE Transactions on Neural Systems and Rehabilitation Engineering, 2016, 24 (12): 1284-1293.
    [23]
    ZHANG Z H, XIAO Y, LIU Y Q, et al. A quantitative investigation on vibration durability of viscoelastic relaxation in bolted composite joints[J]. Journal of Composite Materials, 2016, 50 (29): 4041-4056.
    [24]
    WU Tie-ying, WAGNER D, KIRK D. Analysis of the plastic zone of a circle crack under very high cycle fatigue[J]. International Journal of Fatigue, 2016, 93: 415-421.
    [25]
    CARLUCCI F, FELICI F, PICCININI A, et al. Individual optimal frequency in whole-body vibration: effect of protocol, joint angle, and fatiguing exercise[J]. The Journal of Strength and Conditioning Research, 2016, 30 (12): 3503-3511.
    • Relative Articles
    • Supplements(0)
    • Cited By
  • 加载中

Catalog

    通讯作者: 陈斌, bchen63@163.com
    • 1. 

      沈阳化工大学材料科学与工程学院 沈阳 110142

    1. 本站搜索
    2. 百度学术搜索
    3. 万方数据库搜索
    4. CNKI搜索
    Get Citation
    PDF
    XML

    Article Metrics

    Article views (678) PDF downloads(477) Cited by()
    Proportional views
    Related

    Copyright《Journal of Traffic and Transportation Engineering》编辑部陕ICP备05001904号-1

    Address ：Editorial Department of Journal of Traffic and Transportation Engineering, Chang 'an University, Middle Section of South Second Ring Road, Xi 'an, Shaanxi（710064） Tel：029-82334388 Email：jygc@chd.edu.cn

    All visit:Today's visit:

    Supported by: Beijing Renhe Information Technology Co. Ltd    

    /

    DownLoad:  Full-Size Img  PowerPoint
    Return
    Return