Volume 19 Issue 4
. 
Turn off MathJax
Article Contents
Article Navigation >  Journal of Traffic and Transportation Engineering  > 2019  >  19(4): 125-136
LIU Hai-tao. Influence of y+ value on calculation accuracy of aerodynamic parameters of MIRA model[J]. Journal of Traffic and Transportation Engineering, 2019, 19(4): 125-136. doi: 10.19818/j.cnki.1671-1637.2019.04.012
Citation: LIU Hai-tao. Influence of y+ value on calculation accuracy of aerodynamic parameters of MIRA model[J]. Journal of Traffic and Transportation Engineering, 2019, 19(4): 125-136. doi: 10.19818/j.cnki.1671-1637.2019.04.012
shu

Influence of y+ value on calculation accuracy of aerodynamic parameters of MIRA model

doi: 10.19818/j.cnki.1671-1637.2019.04.012

  • School of Mechanotronics and Vehicle Engineering, East China Jiaotong University, Nanchang 330013, Jiangxi, China

More Information
  • Author Bio:

    LIU Hai-tao(1986-), male, lecturer, PhD, liuht_2005@163.com

  • Received Date: 2019-02-15
  • Publish Date: 2019-08-25
    Abstract
  • In order to study the influence of dimensionless parameter y+ value on the calculation accuracy of aerodynamic parameters of vehicles, based on the step-back MIRA model, the size of near-wall grids was adjusted under the condition that the number and quality of model grids were similar, and the flow field simulation models with different y+ values were constructed. Considering that different turbulence models have different applicable ranges of y+ values for the external flow field simulation of vehicles, two common turbulence models of shear stress transmission (SST) κ-ω and large eddy simulation (LES) were selected to simulate the steady and unsteady external flow field of the step-back MIRA model. The simulation results of aerodynamic parameter were compared with the experimental results, and the appropriate ranges of y+ value were obtained. Combining the velocity nephogram and the carbody surface stress curve from the flow field simulation results, the influence of grid thickness of the first layer of boundary layer on the simulation accuracy was analyzed. The external flow field simulation models for the square-back MIRA model under the two turbulence models were established, the aerodynamic parameters were calculated at different flow velocities, and the ranges of y+ value were verified. Analysis result shows that the appropriate average y+ value range of SST κ-ω model is 20-50 for the external flow field numerical simulation of vehicles, and the appropriate average y+ value range of LES model is 5-10. When the thickness of the first near-wall grid of boundary layer is too large, the numerical simulation can not accurately capture the change of velocity gradient in the boundary layer, which leads to the loss of flow information in the flow field of boundary layer. When the thickness of the first near-wall grid is too small, the boundary layer grid will be seriously distorted. In both cases, the calculation errors of aerodynamic parameter exceed 5%, which will affect the numerical simulation accuracy of external flow field of vehicles. According to the obtained ranges of y+ value, the errors of aerodynamic parameter calculated by the square-back MIRA model are less than 5%, which illustrates the correctness of ranges of average y+ value for the two turbulence models.

     

    • FullText(HTML)
  • loading
    • References(31)
  • [1]
    NANA C, MARX D, PRAX C, et al. Hybrid aeroacoustic computation of a low Mach number non-isothermal shear layer[J]. Computers and Fluids, 2014, 93 (8): 30-40.
    [2]
    KANG S O, JUN S O, PARK H I, et al. Actively translating a rear diffuser device for the aerodynamic drag reduction of a passenger car[J]. International Journal of Automotive Technology, 2012, 13 (4): 583-592. doi: 10.1007/s12239-012-0056-x
    [3]
    SEBBEN S, STERKEN L, WOLKEN T. Characterization of the rear wake of a SUV with and without extensions[J]. Journal of Automobile Engineering, 2017, 231 (9): 1294-1302. doi: 10.1177/0954407016678016
    [4]
    SHAO Nan, YAO Guo-feng, ZHANG Chang, et al. A new method to optimize the wake flow of a vehicle: the leading edge rotating cylinder[J]. Mathematical Problems in Engineering, 2017, 2017 (3): 1-16.
    [5]
    BARSOTTI D L, DIVO E A, BOETCHER S K S. Optimizing jets for active control of wake refinement for ground vehicles[J]. Journal of Fluids Engineering, 2015, 137 (12): 1-10.
    [6]
    GUILMINEAU E, CHIKHAOUI O, DENG G, et al. Cross wind effects on a simplified car model by a DES approach[J]. Computers and Fluids, 2013, 78 (1): 29-40.
    [7]
    范伟军, 陈涛, 石少亮. 侧风下的汽车非光滑表面后视镜气动降噪研究[J]. 噪声与振动控制, 2017, 37 (5): 103-108, 131. doi: 10.3969/j.issn.1006-1355.2017.05.022

    FAN Wei-jun, CHEN Tao, SHI Shao-liang. Research on the aerodynamic noise reduction of car rearview mirrors with non-smooth surface under crosswind condition[J]. Noise and Vibration Control, 2017, 37 (5): 103-108, 131. (in chinese). doi: 10.3969/j.issn.1006-1355.2017.05.022
    [8]
    YU Meng-ge, ZHANG Ji-ye, ZHANG Wei-hua. Multi-objective optimization design method of the high-speed train head[J]. Journal of Zhejiang University—Science A (Applied Physics and Engineering), 2013, 14 (9): 631-641. doi: 10.1631/jzus.A1300109
    [9]
    ZHANG Liang, ZHANG Ji-ye, LI Tian, et al. Multi-objective aerodynamic optimization design of high-speed train head shape[J]. Journal of Zhejiang University—Science A (Applied Physics and Engineering), 2017, 18 (11): 841-854. doi: 10.1631/jzus.A1600764
    [10]
    NIU Ji-qiang, ZHOU Dan, LIU Tang-hong, et al. Numerical simulation of aerodynamic performance of a couple multiple units high-speed train[J]. Vehicle System Dynamics, 2017, 55 (5): 681-703. doi: 10.1080/00423114.2016.1277769
    [11]
    朱海燕, 张翼, 赵怀瑞, 等. 基于边界层控制的高速列车减阻技术[J]. 交通运输工程学报, 2017, 17 (2): 64-72. doi: 10.3969/j.issn.1671-1637.2017.02.007

    ZHU Hai-yan, ZHANG Yi, ZHAO Huai-rui, et al. Drag reduction technology of high-speed train based on boundary layer control[J]. Journal of Traffic and Transportation Engineering, 2017, 17 (2): 64-72. (in chinese). doi: 10.3969/j.issn.1671-1637.2017.02.007
    [12]
    孙朋朋. 高速列车非光滑车身气动减阻特性研究[D]. 杭州: 浙江大学, 2012.

    SUN Peng-peng. Research on aerodynamic drag reduction of high-speed train with non-smooth surface[D]. Hangzhou: Zhejiang University, 2012. (in Chinese).
    [13]
    杜健, 龚明, 田爱琴, 等. 基于仿生非光滑沟槽的高速列车减阻研究[J]. 铁道科学与工程学报, 2014, 11 (5): 70-76. doi: 10.3969/j.issn.1672-7029.2014.05.013

    DU Jian, GONG Ming, TIAN Ai-qin, et al. Study on the drag reduction of the high-speed train based on the bionic non-smooth riblets[J]. Journal of Railway Science and Engineering, 2014, 11 (5): 70-76. (in Chinese). doi: 10.3969/j.issn.1672-7029.2014.05.013
    [14]
    梅毅, 曲建俊, 李岩. y+值对垂直轴风力机气动特性计算结果的影响[J]. 电力科学与工程, 2017, 33 (4): 60-64. doi: 10.3969/j.ISSN.1672-0792.2017.04.011

    MEI Yi, QU Jian-jun, LI Yan. Influence of y+ on the computation of vertical axis wind turbine aerodynamic performance[J]. Electric Power Science and Engineering, 2017, 33 (4): 60-64. (in Chinese). doi: 10.3969/j.ISSN.1672-0792.2017.04.011
    [15]
    王超, 郑小龙, 李亮, 等. y+值对潜艇流场大涡模拟计算精度的影响[J]. 华中科技大学学报(自然科学版), 2015, 43 (4): 79-83. https://www.cnki.com.cn/Article/CJFDTOTAL-HZLG201504016.htm

    WANG Chao, ZHENG Xiao-long, LI Liang, et al. Influence of y+ on the calculation of submarine flow field characteristics of LES calculation accuracy[J]. Journal of Huazhong University of Science and Technology (Natural Science Edition), 2015, 43 (4): 79-83. (in Chinese). https://www.cnki.com.cn/Article/CJFDTOTAL-HZLG201504016.htm
    [16]
    于冲, 王旭, 董福安, 等. y+值对翼型气动参数计算精度的影响研究[J]. 空军工程大学学报(自然科学版), 2012, 13 (3): 25-29. https://www.cnki.com.cn/Article/CJFDTOTAL-KJGC201203007.htm

    YU Chong, WANG Xu, DONG Fu-an, et al. The study of effect of y+ on precision of pneumatic parameters of foil[J]. Journal of Air Force Engineering University (Natural Science Edition), 2012, 13 (3): 25-29. (in Chinese). https://www.cnki.com.cn/Article/CJFDTOTAL-KJGC201203007.htm
    [17]
    熊超强, 臧孟炎, 范秦寅. 低阻力汽车外流场的数值模拟及其误差分析[J]. 汽车工程, 2012, 34 (1): 36-39, 45. doi: 10.3969/j.issn.1000-680X.2012.01.009

    XIONG Chao-qiang, ZANG Meng-yan, FAN Qin-yin. Numerical simulaiton of external flow field around low drag car and its error analysis[J]. Automotive Engineering, 2012, 34 (1): 36-39, 45. (in Chinese). doi: 10.3969/j.issn.1000-680X.2012.01.009
    [18]
    赖晨光, 任浡麒, 满超. y+值对地面交通工具气动阻力计算精度影响的研究[J]. 重庆理工大学学报(自然科学), 2015, 29 (10): 7-11. https://www.cnki.com.cn/Article/CJFDTOTAL-CGGL201510007.htm

    LAI Chen-guang, REN Bo-qi, MAN Chao. Research of effect of y+ on precision of aerodynamic drag of ground transportation[J]. Journal of Chongqing University of Technology (Natural Science), 2015, 29 (10): 7-11. (in Chinese). https://www.cnki.com.cn/Article/CJFDTOTAL-CGGL201510007.htm
    [19]
    TAN Xiao-ming, YANG Zhi-guang, TAN Xi-ming, et al. Vortex structures and aeroacoustic performance of the flow field of the pantograph[J]. Journal of Sound and Vibration, 2018, 432: 17-32. doi: 10.1016/j.jsv.2018.06.025
    [20]
    李小珊, 孙桓五, 黄锦华. 两方程模型在汽车外流场数值计算中的实用性分析[J]. 机械科学与技术, 2011, 30 (8): 1296-1299. https://www.cnki.com.cn/Article/CJFDTOTAL-JXKX201108018.htm

    LI Xiao-shan, SUN Huan-wu, HUANG Jin-hua. The practicability of two-equation models on numerical simulation of automobile external flow field[J]. Mechanical Science and Technology for Aerospace Engineering, 2011, 30 (8): 1296-1299. (in Chinese). https://www.cnki.com.cn/Article/CJFDTOTAL-JXKX201108018.htm
    [21]
    何忆斌, 谷正气, 吴军, 等. 三方程在汽车外流场仿真计算中的应用[J]. 机械工程学报, 2008, 44 (1): 184-189. https://www.cnki.com.cn/Article/CJFDTOTAL-JXXB200801033.htm

    HE Yi-bin, GU Zheng-qi, WU Jun, et al. Application of three-equation turbulence model in numerical simulation of vehicle external flow field[J]. Chinese Journal of Mechanical Engineering, 2008, 44 (1): 184-189. (in Chinese). https://www.cnki.com.cn/Article/CJFDTOTAL-JXXB200801033.htm
    [22]
    OSTILLA-MÓNICO R, VERZICCO R, GROSSMANN S, et al. The near-wall region of highly turbulent Taylor-Couette flow[J]. Journal of Fluid Mechanics, 2016, 788: 95-117.
    [23]
    EISMA J, WESTERWEEL J, OOMS G, et al. Interfaces and internal layers in a turbulent boundary layer[J]. Physics of Fluids, 2015, 27 (5): 1-16.
    [24]
    PATEL A, BOERSMA B J, PECNIK, R. The influence of near-wall density and viscosity gradients on turbulence in channel flows[J]. Journal of Fluid Mechanics, 2016, 809: 793-820.
    [25]
    黄乾. 基于大涡模拟的锯齿尾缘翼型流动分析及气动噪声预测[D]. 北京: 清华大学, 2015.

    HUANG Qian. A numerical study of the flow around airfoils with serrated trailing edges and the aerodynamic noise based on large eddy simulation[D]. Beijing: Tsinghua University, 2015. (in chinese).
    [26]
    ZHANG Y O, ZHANG T, OUYANG H, et al. Flow-induced noise analysis for 3D trash rack based on LES/Lighthill hybrid method[J]. Applied Acoustics, 2014, 79 (1): 141-152.
    [27]
    王师. MIRA模型组气动特性模型风洞试验研究[D]. 长沙: 湖南大学, 2011.

    WANG Shi. Experimental investigation on aerodynamic characteristics of MIRA model group in wind tunnel[D]. Changsha: Hunan University, 2011. (in Chinese).
    [28]
    黄志祥, 金华, 胡兴军, 等. 地面效应对汽车模型气动阻力的影响[J]. 交通运输工程学报, 2017, 17 (4): 106-112. http://transport.chd.edu.cn/article/id/201704011

    HUANG Zhi-xiang, JIN Hua, HU Xing-jun, et al. Influence of ground effect on air drag of car model[J]. Journal of Traffic and Transportation Engineering, 2017, 17 (4): 106-112. (in Chinese). http://transport.chd.edu.cn/article/id/201704011
    [29]
    LARSSON J, KAWAI S, BODART J, et al. Large eddy simulation with modeled wall-stress: recent progress and future directions[J]. Mechanical Engineering Reviews, 2016, 3 (1): 1-23.
    [30]
    BOSE S T, PARK G I. Wall-modeled large-eddy simulation for complex turbulent flows[J]. Annual Review of Fluid Mechanics, 2018, 50 (1): 535-561.
    [31]
    谷正气, 王师, 仇健, 等. MIRA模型组尾部造型风洞试验研究[J]. 科技导报, 2011, 29 (8): 67-71. https://www.cnki.com.cn/Article/CJFDTOTAL-KJDB201108023.htm

    GU Zheng-qi, WANG Shi, QIU Jian, et al. Wind tunnel tests of MIRA model group for study of vehicle's rear shape[J]. Science and Technology Review, 2011, 29 (8): 67-71. (in Chinese). https://www.cnki.com.cn/Article/CJFDTOTAL-KJDB201108023.htm
    • Relative Articles
    • Supplements(0)
    • Cited By
  • 加载中

Catalog

    通讯作者: 陈斌, bchen63@163.com
    • 1. 

      沈阳化工大学材料科学与工程学院 沈阳 110142

    1. 本站搜索
    2. 百度学术搜索
    3. 万方数据库搜索
    4. CNKI搜索
    Get Citation
    PDF
    XML

    Article Metrics

    Article views (1869) PDF downloads(1165) Cited by()
    Proportional views
    Related

    Copyright《Journal of Traffic and Transportation Engineering》编辑部陕ICP备05001904号-1

    Address ：Editorial Department of Journal of Traffic and Transportation Engineering, Chang 'an University, Middle Section of South Second Ring Road, Xi 'an, Shaanxi（710064） Tel：029-82334388 Email：jygc@chd.edu.cn

    All visit:Today's visit:

    Supported by: Beijing Renhe Information Technology Co. Ltd    

    /

    DownLoad:  Full-Size Img  PowerPoint
    Return
    Return