Volume 20 Issue 4
. 
Turn off MathJax
Article Contents
Article Navigation >  Journal of Traffic and Transportation Engineering  > 2020  >  20(4): 21-34
LYU Yan-jun, KANG Jian-xiong, ZHANG Yong-fang, LUO Hong-bo. Research progress of anti-friction and anti-wear of piston-cylinder liner system in internal combustion engine[J]. Journal of Traffic and Transportation Engineering, 2020, 20(4): 21-34. doi: 10.19818/j.cnki.1671-1637.2020.04.002
Citation: LYU Yan-jun, KANG Jian-xiong, ZHANG Yong-fang, LUO Hong-bo. Research progress of anti-friction and anti-wear of piston-cylinder liner system in internal combustion engine[J]. Journal of Traffic and Transportation Engineering, 2020, 20(4): 21-34. doi: 10.19818/j.cnki.1671-1637.2020.04.002
shu

Research progress of anti-friction and anti-wear of piston-cylinder liner system in internal combustion engine

doi: 10.19818/j.cnki.1671-1637.2020.04.002
  • 1.

    School of Mechanical and Precision Instrument Engineering, Xi'an University of Technology, Xi'an 710048, Shaanxi, China

  • 2.

    Faculty of Printing, Packaging Engineering and Digital Media Technology, Xi'an University of Technology, Xi'an 710048, Shaanxi, China

Funds:

National Natural Science Foundation of China 51775428

Key Research and Development Program of Shaanxi Province 2020GY-106

Open Project of State Key Laboratory for Manufacturing Systems Engineering sklms2020010

More Information
  • Author Bio:

    LYU Yan-jun(1972-), male, professor, PhD, yanjunlu@xaut.edu.cn

  • Received Date: 2020-02-15
  • Publish Date: 2020-04-25
    Abstract
  • The research findings of friction and wear of piston-cylinder liner system in internal combustion engine were summarized, the developments of research methods and technologies of the system's anti-friction and anti-wear were reviewed from the aspects of lubricating oil improvement, surface modification and dynamics characteristics. The influences of lubrication model, lubrication additive, surface texturing, cylinder liner honing, surface coating and dynamics characteristic on the system's anti-friction and anti-wear were discussed, and the mechanism of friction and wear of the system was studied. Research result indicates that the lubrication characteristic of the piston-cylinder liner system is nonlinear. Lubrication status and additive have a great influence on the system's anti-friction and anti-wear, and the uncertainty of the system's lubrication status leads to the coexistence of multiple lubrication models. It is necessary to establish the comprehensive lubrication model of the system and discuss the optimal dosage and mechanism of anti-wear of lubricant additive in depth. Surface modification technologies(surface texturing, honing and coating) can greatly reduce the friction and wear of the system surface. The comprehensive development of surface modification technologies is relatively slow because of the effect of texture position distribution, processing parameters, processing technology, surface morphology and coating materials on the contact surface, so the anti-wear mechanism and parameter optimization methods of surface modification need to be further studied. Because the piston-cylinder liner system operates under harsh conditions and the components of the system interact and are coupled with each other, it's relatively difficult to deeply discuss the relationship between dynamics characteristics and evolution laws of friction and wear, the relationship should be fully considered under service condition. The improvement of the internal combustion engine performance will force the piston-cylinder liner system to have higher anti-wear and anti-friction performance in future. In order to achieve the goal of economy, energy conservation and emission reduction of the system, the high-efficiency anti-friction technologies need to be further developed.

     

    • FullText(HTML)
  • loading
    • References(111)
  • [1]
    TOMANIK E, EL MANSORI M, SOUZA R, et al. Effect of waviness and roughness on cylinder liner friction[J]. Tribology International, 2018, 120: 547-555. doi: 10.1016/j.triboint.2018.01.012
    [2]
    BIBERGER J, FÜßER H J. Development of a test method for a realistic, single parameter-dependent analysis of piston ring versus cylinder liner contacts with a rotational tribometer[J]. Tribology International, 2017, 113: 111-124. doi: 10.1016/j.triboint.2016.10.043
    [3]
    RICHARDSON D E. Review of power cylinder friction for diesel engines[J]. Journal of Engineering for Gas Turbines and Power, 2000, 122: 506-519. doi: 10.1115/1.1290592
    [4]
    DELPRETE C, RAZAVYKIA A. Piston ring-liner lubrication and tribological performance evaluation: a review[J]. Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology, 2018, 232(2): 193-209. doi: 10.1177/1350650117706269
    [5]
    MAHDISOOZANI H, MOHSENIZADEH M, BAHIRAEI M, et al. Performance enhancement of internal combustion engines through vibration control: state of the art and challenges[J]. Applied Sciences, 2019, 9(3): 1-30.
    [6]
    ZAVOS A, NIKOLAKOPOULOS P G. Waviness and straightness of cylinder and textured piston ring tribo pair[J]. International Journal of Structural Integrity, 2015, 6(2): 300-324. doi: 10.1108/IJSI-07-2013-0014
    [7]
    BHASKAR K V, SUNDARRAJAN S, RAO B S. Effect of reinforcement and wear parameters on dry sliding wear of aluminum composites: a review[J]. Materials Today: Proceedings, 2018, 5(2): 5891-5900. doi: 10.1016/j.matpr.2017.12.188
    [8]
    MALLESWARARAO N D, NIRANJAN KUMAR I N. Investigation of tribological behaviour of DLC coating on hypereutectic Al-Si alloys, a review[J]. Materials Today: Proceedings, 2019, 18(2): 2581-2589.
    [9]
    HAMID Y, USMAN A, AFAQ S K, et al. Numeric based low viscosity adiabatic thermo-tribological performance analysis of piston-skirt liner system lubrication at high engine speed[J]. Tribology International, 2018, 126: 166-176. doi: 10.1016/j.triboint.2018.05.022
    [10]
    NING Li-pu, MENG Xiang-hui, XIE You-bai. Effects of lubricant shear thinning on the mixed lubrication of piston skirt-liner system[J]. Journal of Mechanical Engineering Science, 2012, 227(7): 1585-1598.
    [11]
    GRABON W, PAWLUS P, WOS S, et al. Evolutions of cylinder liner surface texture and tribological performance of piston ring-liner assembly[J]. Tribology International, 2018, 127: 545-556. doi: 10.1016/j.triboint.2018.07.011
    [12]
    JIA Bo-ru, MIKALSEN R, SMALLBONE A, et al. A study and comparison of frictional losses in free-piston engine and crankshaft engines[J]. Applied Thermal Engineering, 2018, 140: 217-224. doi: 10.1016/j.applthermaleng.2018.05.018
    [13]
    BUJ-CORRAL I, ÁLVAREZ-FLÓREZ J, DOMÍNGUEZ-FERNÁNDEZ A. Acoustic emission analysis for the detection of appropriate cutting operations in honing processes[J]. Mechanical Systems and Signal Processing, 2018, 99: 873-885. doi: 10.1016/j.ymssp.2017.06.039
    [14]
    PATIR N, CHENG H S. An average flow model for determining effects of three-dimensional roughness on partial hydrodynamic lubrication[J]. Journal of Tribology, 1978, 100: 12-17.
    [15]
    PATIR N, CHENG H S. Application of average flow model to lubrication between rough sliding surfaces[J]. Journal of Tribology, 1979, 101: 220-229.
    [16]
    HU Y, MENG X H, XIE Y B. A new efficient flow continuity lubrication model for the piston ring-pack with consideration of oil storage of the cross-hatched texture[J]. Tribology International, 2018, 119: 443-463. doi: 10.1016/j.triboint.2017.11.027
    [17]
    SUN Jun, HUANG Xiang, LIU Guang-sheng, et al. Research on the status of lubricating oil transport in piston skirt-cylinder liner of engine[J]. Journal of Tribology, 2018, 140: 041702-1-10. doi: 10.1115/1.4038960
    [18]
    GUO Chao, SONG Qing-hua, LIU Zhan-qiang, et al. Hydrodynamic lubrication analysis of two-dimensional section between piston skirt and textured cylinder wall considering slip boundary conditions[J]. Tribology International, 2019, 140: 105879-1-13. doi: 10.1016/j.triboint.2019.105879
    [19]
    CASTLEMAN R A. A hydrodynamical theory of piston ring lubrication[J]. Physics, 1936, 7: 364-367. doi: 10.1063/1.1745404
    [20]
    TING L L, MAYER J E. Piston ring lubrication and cylinder bore wear analysis, Part Ⅰ—theory[J]. Journal of Lubrication Technology, 1974, 96(3): 305-313. doi: 10.1115/1.3451948
    [21]
    TING L L, MAYER J E. Piston ring lubrication and cylinder bore wear analyses, Part Ⅱ—theory verification[J]. Journal of Lubrication Technology, 1974, 96(2): 258-266. doi: 10.1115/1.3451941
    [22]
    WAKURI Y, HAMATAKE T, SOEJIMA M, et al. Piston ring friction in internal combustion engines[J]. Tribology International, 1992, 25(5): 299-308. doi: 10.1016/0301-679X(92)90027-K
    [23]
    VENKATESH S. Analysis of piston ring lubrication[J]. Applied Scientific Research, 1975, 31: 309-319. doi: 10.1007/BF00389221
    [24]
    MA M T, SMITH E H, SHERRINGTON I. A three-dimensional analysis of piston ring lubrication. Part 1: modelling[J]. Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology, 1995, 209(1): 1-14. doi: 10.1243/PIME_PROC_1995_209_401_02
    [25]
    MA M, SMITH E H, SHERRINGTON I. A three-dimensional analysis of piston ring lubrication. Part 2: sensitivity analysis[J]. Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology, 1995, 209(1): 15-27. doi: 10.1243/PIME_PROC_1995_209_402_02
    [26]
    HARIGAYA Y, SUZUKI M, TODA F, et al. Analysis of oil film thickness and heat transfer on a piston ring of a diesel engine: effect of lubricant viscosity[J]. Journal of Engineering for Gas Turbines and Power, 2006, 128(3): 685-693. doi: 10.1115/1.1924403
    [27]
    MA M T, SHERRINGTON I, SMITH E H. Implementation of an algorithm to model the starved lubrication of a piston ring in distorted bores: prediction of oil flow and onset of gas blow-by[J]. Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology, 1996, 210(1): 29-44. doi: 10.1243/PIME_PROC_1996_210_475_02
    [28]
    PELOSI M, IVANTYSYNOVA M. Heat transfer and thermal elastic deformation analysis on the piston/cylinder interface of axial piston machines[J]. Journal of Tribology, 2012, 134(4): 041101-1-15. doi: 10.1115/1.4006980
    [29]
    QASIM S A, AFZAAL MALIK M, ALI KHAN M, et al. Low viscosity shear heating in piston skirts EHL in the low initial engine start up speeds[J]. Tribology International, 2011, 44(10): 1134-1143. doi: 10.1016/j.triboint.2011.04.018
    [30]
    ADNAN QASIM S, AFZAAL MALIK M, ALI KHAN M, et al. Modeling shear heating in piston skirts EHL considering different viscosity oils in initial engine start up[J]. Journal of Engineering for Gas Turbines and Power, 2012, 134(3): 032802-1-8. doi: 10.1115/1.4004717
    [31]
    MENG F M, ZHANG Y Y, HU Y Z, et al. Thermo-elasto-hydrodynamic lubrication analysis of piston skirt considering oil film inertia effect[J]. Tribology International, 2007, 40(7): 1089-1099. doi: 10.1016/j.triboint.2006.10.006
    [32]
    余志壮, 宋正华, 董光能, 等. 内燃机气缸套失圆对活塞动压润滑和摩擦特性的影响[J]. 摩擦学学报, 2005, 25(3): 243-247. doi: 10.3321/j.issn:1004-0595.2005.03.012

    YU Zhi-zhuang, SONG Zheng-hua, DONG Guang-neng, et al. Influence of cylinder liner out-of-roundness on dynamic lubrication and friction characteristics of piston[J]. Tribology, 2005, 25(3): 243-247. (in Chinese). doi: 10.3321/j.issn:1004-0595.2005.03.012
    [33]
    王虎, 孙军, 赵小勇, 等. 非圆缸套下的活塞环-缸套油膜分布[J]. 农业工程学报, 2011, 27(9): 48-53. doi: 10.3969/j.issn.1002-6819.2011.09.010

    WANG Hu, SUN Jun, ZHAO Xiao-yong, et al. Oil film thickness distribution between piston ring and cylinder considering non-circular of cylinder bore[J]. Transactions of the Chinese Society of Agricultural Engineering, 2011, 27(9): 48-53. (in Chinese). doi: 10.3969/j.issn.1002-6819.2011.09.010
    [34]
    ZHU D, CHENG H S, ARAI T, et al. A numerical analysis for piston skirts in mixed lubrication—Part Ⅰ: basic modeling[J]. Journal of Tribology, 1992, 114(3): 553-562. doi: 10.1115/1.2920917
    [35]
    ZHU D, HU Y Z, CHENG H S, et al. A numerical analysis for piston skirts in mixed lubrication—part Ⅱ: deformation considerations[J]. Journal of Tribology, 1993, 115(1): 125-133. doi: 10.1115/1.2920965
    [36]
    GULWADI S D. Mixed lubrication and oil transport model for piston rings using a mass-conserving algorithm[C]//ASME. Proceedings of the 1995 17th Annual Fall Technical Conference of the ASME Internal Combustion Engine Division. New York: ASME, 1995: 129-139.
    [37]
    MA M T, SHERRINGTON I, SMITH E H. Analysis of lubrication and friction for a complete piston-ring pack with an improved oil availability model. Part 1: circumferentially uniform film[J]. Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology, 1997, 211(1): 1-15. doi: 10.1243/1350650971542273
    [38]
    MA M T, SMITH E H, SHERRINGTON I. Analysis of lubrication and friction for a complete piston-ring pack with an improved oil availability model. Part 2: circumferentially variable film[J]. Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology, 1997, 211(1): 17-27. doi: 10.1243/1350650971542282
    [39]
    HAMATAKE T, WAKURI Y, SOEJIMA M, et al. Effects of lubricant viscosity on the mixed lubrication of a piston ring pack in an internal combustion engine[J]. Lubrication Science, 2003, 15(2): 101-117. doi: 10.1002/ls.3010150202
    [40]
    BOLANDER N W, STEENWYK B D, KUMAR A, et al. Film thickness and friction measurement of piston ring cylinder liner contact with corresponding modeling including mixed lubrication[C]∥ASME. Fall Technical Conference of the ASME International Combustion Engine Division. New York: ASME, 2004: 811-821.
    [41]
    ZHANG Ya-zhao, KOVALEV A, HAYASHI N, et al. Numerical prediction of surface wear and roughness parameters during running-in for line contacts under mixed lubrication[J]. Journal of Tribology, 2018, 140(6): 061501-1-13. doi: 10.1115/1.4039867
    [42]
    LIU Cheng, LYU Yan-jun, WANG Peng, et al. Numerical analysis of the effects of compression ring wear and cylinder liner deformation on the thermal mixed lubrication performance of ring-liner system[J]. Mechanics and Industry, 2018, 19(2): 1-15.
    [43]
    LIU Cheng, LYU Yan-jun, ZHANG Yong-fang, et al. Numerical study on the tribological performance of ring/liner system with consideration of oil transport[J]. Journal of Tribology, 2019, 141(1): 011701-1-16. doi: 10.1115/1.4040510
    [44]
    MENG Xiang-hui, HU Yang, XIE You-bai. Modeling of the cylinder liner "zero-wear" process by two-scale homogenization technique[J]. Wear, 2016, 368/369: 408-422. doi: 10.1016/j.wear.2016.10.018
    [45]
    MENG Xiang-hui, GU Chun-xing, ZHANG Di. Modeling the wear process of the ring/liner conjunction considering the evaluation of asperity height distribution[J]. Tribology International, 2017, 112: 20-32. doi: 10.1016/j.triboint.2017.03.025
    [46]
    HU Yang, MENG Xiang-hui, XIE You-bai. A computationally efficient mass-conservation-based, two-scale approach to modeling cylinder liner topography changes during running-in[J]. Wear, 2017, 386/387: 139-156. doi: 10.1016/j.wear.2017.06.014
    [47]
    ZHANG Zhi-nan, LIU Jun, XIE You-bai. Design approach for optimization of a piston ring profile considering mixed lubrication[J]. Friction, 2016, 4(4): 335-346. doi: 10.1007/s40544-016-0130-x
    [48]
    YIN Bi-feng, GAO Da-shu, SUN Shao, et al. Research on the profile design of surface texture in piston ring of internal combustion engine[J]. Journal of Tribology, 2018, 140(6): 061701-1-9. doi: 10.1115/1.4039957
    [49]
    KALELI H, EYRE T, GHASRIPOOR F. Effect of lubricant additives on the transition pressure from mild to severe wear for grey cast iron sliding pairs[J]. Wear, 1997, 208(1/2): 1-10.
    [50]
    NICHOLLS M A, DO T, NORTON P R, et al. Review of the lubrication of metallic surfaces by zinc dialkyl-dithiophosphates[J]. Tribology International, 2005, 38(1): 15-39. doi: 10.1016/j.triboint.2004.05.009
    [51]
    BURKINSHAW M, NEVILLE A, MORINA A, et al. The lubrication of both aluminium-silicon and model silicon surfaces with calcium sulphonate and an organic antiwear additive[J]. Tribology International, 2013, 67: 211-216. doi: 10.1016/j.triboint.2013.07.006
    [52]
    QU Jun, LUO Hui-min, CHI Miao-fang, et al. Comparison of an oil-miscible ionic liquid and ZDDP as a lubricant anti-wear additive[J]. Tribology International, 2014, 71: 88-97. doi: 10.1016/j.triboint.2013.11.010
    [53]
    OGUT H, OGUZ H, AYDIN F, et al. The investigation of the use of plant-based wild mustard and boron doped oil as engine lubrication oil in diesel engines[J]. Renewable Energy, 2019, 136: 79-83. doi: 10.1016/j.renene.2018.12.117
    [54]
    WHITE D, PODOLAK K, KRAUS G A, et al. Tribological analysis of a novel lubricant additive: pyrone esters[J]. Wear, 2020, 442/443: 203115-1-7. doi: 10.1016/j.wear.2019.203115
    [55]
    AWANG N W, RAMASAMY D, KADIRGAMA K, et al. Study on friction and wear of Cellulose Nanocrystal (CNC) nanoparticle as lubricating additive in engine oil[J]. International Journal of Heat and Mass Transfer, 2019, 131: 1196-1204. doi: 10.1016/j.ijheatmasstransfer.2018.11.128
    [56]
    YUNUSOV F A, BREKI A D, VASILYEVA E S, et al. The influence of nano additives on tribological properties of lubricant oil[J]. Materials Today: Proceedings, DOI: 10.1016/j.matpr.2020.01.447.
    [57]
    CHAROO M S, HANIEF M. Improving the tribological characteristics of a lubricating oil by nano sized additives[J]. Materials Today: Proceedings, DOI: 10.1016/j.matpr.2020.01.219.
    [58]
    HAMILTON D B, WALOWIT J A, ALLEN C M. A theory of lubrication by micro-irregularities[J]. Journal of Basic Engineering, 1966, 88(1): 177-185. doi: 10.1115/1.3645799
    [59]
    RYK G, ETSION I. Testing piston rings with partial laser surface texturing for friction reduction[J]. Wear, 2006, 261(7/8): 792-796.
    [60]
    ETSION I, SHER E. Improving fuel efficiency with laser surface textured piston rings[J]. Tribology International, 2009, 42(4): 542-547. doi: 10.1016/j.triboint.2008.02.015
    [61]
    KLIGERMAN Y, ETSION I, SHINKARENKO A. Improving tribological performance of piston rings by partial surface texturing[J]. Journal of Tribology, 2005, 127(3): 632-638. doi: 10.1115/1.1866171
    [62]
    JOHANSSON S, NILSSON P H, OHLSSON R, et al. New cylinder liner surfaces for low oil consumption[J]. Tribology International, 2008, 41(9/10): 854-859.
    [63]
    刘一静, 袁明超, 王晓雷. 表面织构对发动机活塞/缸套摩擦性能的影响[J]. 中国矿业大学学报, 2009, 38(6): 866-871. doi: 10.3321/j.issn:1000-1964.2009.06.021

    LIU Yi-jing, YUAN Ming-chao, WANG Xiao-lei. Influence of the surface texture on the tribological performances of piston skirt/line[J]. Journal of China University of Mining and Technology, 2009, 38(6): 866-871. (in Chinese). doi: 10.3321/j.issn:1000-1964.2009.06.021
    [64]
    ZHOU Yuan-kai, ZHU Hua, TANG Wei, et al. Development of the theoretical model for the optimal design of surface texturing on cylinder liner[J]. Tribology International, 2012, 52: 1-6. doi: 10.1016/j.triboint.2011.12.017
    [65]
    MEZGHANI S, DEMIRCI I, ZAHOUANI H, et al. The effect of groove texture patterns on piston-ring pack friction[J]. Precision Engineering, 2012, 36(2): 210-217. doi: 10.1016/j.precisioneng.2011.09.008
    [66]
    GRABON W, KOSZELA W, PAWLUS P, et al. Improving tribological behaviour of piston ring-cylinder liner frictional pair by liner surface texturing[J]. Tribology International, 2013, 61: 102-108. doi: 10.1016/j.triboint.2012.11.027
    [67]
    GRABON W, PAWLUS P, WOS S. Effects of honed cylinder liner surface texture on tribological properties of piston ring-liner assembly in short time tests[J]. Tribology International, 2017, 113: 137-148. doi: 10.1016/j.triboint.2016.11.025
    [68]
    GUO Zhi-wei, YUAN Cheng-qing, LIU Peng, et al. Study on influence of cylinder liner surface texture on lubrication performance for cylinder liner-piston ring components[J]. Tribology Letters, 2013, 51(1): 9-23. doi: 10.1007/s11249-013-0141-y
    [69]
    刘成, 吕延军, 李莎, 等. 表面织构对曲轴轴承润滑性能的影响[J]. 交通运输工程学报, 2017, 17(3): 65-74. doi: 10.3969/j.issn.1671-1637.2017.03.007

    LIU Cheng, LYU Yan-jun, LI Sha, et al. Effect of surface texture on tribological performance of crankshaft bearing[J]. Journal of Traffic and Transportation Engineering, 2017, 17(3): 65-74. (in Chinese). doi: 10.3969/j.issn.1671-1637.2017.03.007
    [70]
    张永芳, 刘成, 李莎, 等. 基于混合遗传算法的径向滑动轴承表面织构优化[J]. 交通运输工程学报, 2017, 17(3): 90-98. http://transport.chd.edu.cn/article/id/201703010

    ZHANG Yong-fang, LIU Cheng, LI Sha, et al. Surface texture optimization of journal bearing based on hybrid genetic algorithm[J]. Journal of Traffic and Transportation Engineering, 2017, 17(3): 90-98. (in Chinese). http://transport.chd.edu.cn/article/id/201703010
    [71]
    USMAN A, PARK C W. Optimizing the tribological performance of textured piston ring-liner contact for reduced frictional losses in SI engine: warm operating conditions[J]. Tribology International, 2016, 99: 224-236. doi: 10.1016/j.triboint.2016.03.030
    [72]
    LIU Cheng, LYU Yan-jun, ZHANG Yong-fang, et al. Numerical study on the lubrication performance of compression ring-cylinder liner system with spherical dimples[J]. Plos One, 2017, 12(7): 1-24.
    [73]
    VENKATESWARA BABU P, SYED I, BEERA S B. Influence of positive texturing on friction and wear properties of piston ring-cylinder liner tribo pair under lubricated conditions[J]. Industrial Lubrication and Tribology, 2019, 71(4): 515-524. doi: 10.1108/ILT-07-2017-0203
    [74]
    ASHIHARA K, HASHIMOTO H. Friction characteristics of microgrooved bearings under mixed lubrication[J]. Japanese Society of Tribologists, 2008, 3: 304-309.
    [75]
    ETSION I. Improving tribological performance of mechanical components by laser surface texturing[J]. Tribology Letters, 2004, 17(4): 733-737. doi: 10.1007/s11249-004-8081-1
    [76]
    PAWLUS P, CIESLAK T, MATHIA T. The study of cylinder liner plateau honing process[J]. Journal of Materials Processing Technology, 2009, 209(20): 6078-6086. doi: 10.1016/j.jmatprotec.2009.04.025
    [77]
    PAWLUS P, REIZER R, WIECZOROWSKI M. The analysis of directionality of honed cylinder liners surfaces[J]. Scanning, 2014, 36(1): 95-104. doi: 10.1002/sca.21101
    [78]
    MICHALSKI J, WOS P. The effect of cylinder liner surface topography on abrasive wear of piston-cylinder assembly in combustion engine[J]. Wear, 2011, 271(3/4): 582-589.
    [79]
    MEZGHANI S, DEMIRCI I, YOUSFI M, et al. Running-in wear modeling of honed surface for combustion engine cylinder liners[J]. Wear, 2013, 302(1/2): 1360-1369.
    [80]
    VRAC D S, SIDJANIN L P, KOVAC P P, et al. The influence of honing process parameters on surface quality, productivity, cutting angle and coefficients of friction[J]. Industrial Lubrication and Tribology, 2012, 64(2): 77-83. doi: 10.1108/00368791211208679
    [81]
    ZAHOUANI H, EL MANSORI M. Multi-scale and multi-fractal analysis of abrasive wear signature of honing process[J]. Wear, 2017, 376/377: 178-187. doi: 10.1016/j.wear.2017.01.087
    [82]
    KADYROV R R, CHARIKOV P N, PRYANICHNIKOVA V V. Honing process optimization algorithms[J]. IOP Conference Series: Materials Science and Engineering, 2017, 327(2): 1-12.
    [83]
    SIVATTE-ADROER M, LLANAS-PARRA X, BUJ-CORRAL I, et al. Indirect model for roughness in rough honing processes based on artificial neural networks[J]. Precision Engineering, 2016, 43: 503-513.
    [84]
    BUJ-CORRAL I, SIVATTE-ADROER M, LLANAS-PARRA X. Adaptive indirect neural network model for roughness in honing processes[J]. Tribology International, 2020, DOI: 10.1016/j.triboint.2019.105891.
    [85]
    PEREIRA L C, ARENCIBIA R V, SCHRAMM C R, et al. Assessment of the effect of cutting parameters on roughness in flexible honed cylinders[J]. International Journal of Advanced Manufacturing Technology, 2018, 95: 181-196. doi: 10.1007/s00170-017-1200-6
    [86]
    KIM E S, KIM S M, LEE Y Z. The effect of plateau honing on the friction and wear of cylinder liners[J]. Wear, 2018, 400/401: 207-212. doi: 10.1016/j.wear.2017.09.028
    [87]
    SADIZADE B, ARAEE A, BAVIL OLIAEI S N, et al. Plateau honing of a diesel engine cylinder with special topography and reasonable machining time[J]. Tribology International, 2020, DOI: 10.1016/j.triboint.2020.106204.
    [88]
    张瑞军, 李生华, 金元生, 等. 二烷基二硫代甲酸钼和二烷基二硫代磷酸钼对缸套/活塞环摩擦学行为的影响[J]. 摩擦学学报, 2001, 21(3): 191-195. https://www.cnki.com.cn/Article/CJFDTOTAL-MCXX200103006.htm

    ZHANG Rui-jun, LI Sheng-hua, JIN Yuan-sheng, et al. Effect of MoDTC and MoDTP on tribological behavior of cylinder liner/piston ring[J]. Tribology, 2001, 21(3): 191-195. (in Chinese). https://www.cnki.com.cn/Article/CJFDTOTAL-MCXX200103006.htm
    [89]
    CHO D H, LEE Y Z. Evaluation of ring surfaces with several coatings for friction, wear and scuffing life[J]. Transactions of Nonferrous Metals Society of China, 2009, 19(4): 992-996. doi: 10.1016/S1003-6326(08)60393-3
    [90]
    JOHANSSON S, FRENNFELT C, KILLINGER A, et al. Frictional evaluation of thermally sprayed coatings applied on the cylinder liner of a heavy duty diesel engine: pilot tribometer analysis and full scale engine test[J]. Wear, 2011, 273(1): 82-92. doi: 10.1016/j.wear.2011.06.021
    [91]
    PATEL P D, PATEL R N, PATEL H C, et al. Experimental investigation on life cycle analysis of the Moly (Mo) coated piston ring in C. I. Engine[C]//Springer. Proceedings of International Conference on Advances in Tribology and Engineering Systems, Berlin: Springer, 2013, 321-329.
    [92]
    LIN Jian-liang, WEI Rong-hua, BITSIS D C, et al. Development and evaluation of low friction TiSiCN nanocomposite coatings for piston ring applications[J]. Surface and Coatings Technology, 2016, 298: 121-131. doi: 10.1016/j.surfcoat.2016.04.061
    [93]
    WAN Shan-hong, LI Dong-shan, ZHANG Guang-an, et al. Comparison of the scuffing behaviour and wear resistance of candidate engineered coatings for automotive piston rings[J]. Tribology International, 2017, 106: 10-22. doi: 10.1016/j.triboint.2016.10.026
    [94]
    BIBERGER J, FUßER H J, KLAUS M, et al. Near-surface and depth-dependent residual stress evolution in a piston ring hard chrome coating induced by sliding wear and friction[J]. Wear, 2017, 376/377: 1502-1521. doi: 10.1016/j.wear.2017.01.056
    [95]
    LI Cheng-di, WANG Wei-wei, JIN Mei, et al. Friction property of MoS2 coatings deposited on the chemical-etched surface of Al-Si alloy cylinder liner[J]. Journal of Tribology, 2018, 140(4): 041302-1-6. doi: 10.1115/1.4039227
    [96]
    KUMAR V, SINHA S K, AGARWAL A K. Wear evaluation of engine piston rings coated with dual layer hard and soft coatings[J]. Journal of Tribology, 2019, 141(3): 031301-1-10. doi: 10.1115/1.4041762
    [97]
    XU Yu-fu, ZHENG Quan, GENG Jian, et al. Synergistic effects of electroless piston ring coatings and nano-additives in oil on the friction and wear of a piston ring/cylinder liner pair[J]. Wear, 2019, 422/423: 201-211. doi: 10.1016/j.wear.2019.01.064
    [98]
    MA Si-qi, CHEN Wen-bin, LI Cheng-di, et al. Wear properties and scuffing resistance of the Cr-Al2O3 coated piston rings: the effect of convexity position on barrel surface[J]. Journal of Tribology, 2019, 141(2): 021301-1-25. doi: 10.1115/1.4041215
    [99]
    TYAGI A, PANDEY S M, MURTAZA Q, et al. Tribological behavior of carbon coating for piston ring applications using Taguchi approach[J]. Materials Today: Proceedings, 2020, 25: 759-764. doi: 10.1016/j.matpr.2019.09.004
    [100]
    PIAO Y, GULWADI S D. Numerical investigation of the effects of axial cylinder bore profiles on piston ring radial dynamics[J]. Journal of Engineering for Gas Turbines and Power, 2003, 125(4): 1081-1089. doi: 10.1115/1.1610016
    [101]
    MENG Xiang-hui, XIE You-bai. A new numerical analysis for piston skirt-liner system lubrication considering the effects of connecting rod inertia[J]. Tribology International, 2012, 47: 235-243. doi: 10.1016/j.triboint.2011.12.013
    [102]
    TAN Y C, RIPIN Z M. Analysis of piston secondary motion[J]. Journal of Sound and Vibration, 2013, 332(20): 5162-5176. doi: 10.1016/j.jsv.2013.04.042
    [103]
    BA Lin, HE Zhen-peng, GUO Ling-yan, et al. Piston ring-cylinder liner tribology investigation in mixed lubrication regime: part I—correlation with bench experiment[J]. Industrial Lubrication and Tribology, 2015, 67(6): 520-530. doi: 10.1108/ILT-07-2013-0078
    [104]
    ALI M K A, HOU Xian-jun, TURKSON R F, et al. An analytical study of tribological parameters between piston ring and cylinder liner in internal combustion engines[J]. Proceedings of the Institution of Mechanical Engineers, Part K: Journal of Multi-body Dynamics, 2016, 230(4): 329-349. doi: 10.1177/1464419315605922
    [105]
    MAZOUZI R, KELLACI A, KARAS A. Effects of piston design parameters on skirt-liner dynamic behavior[J]. Industrial Lubrication and Tribology, 2016, 68(2): 250-258. doi: 10.1108/ILT-07-2015-0103
    [106]
    LYUBARSKYY P, BARTEL D. 2D CFD-model of the piston assembly in a diesel engine for the analysis of piston ring dynamics, mass transport and friction[J]. Tribology International, 2016, 104: 352-368.
    [107]
    MAHMOUD K G, KNAUS O, PARIKYAN T, et al. Three dimensional ring dynamics modeling approach for analyzing lubrication, friction and wear of piston ring-pack[C]//ASME. 2017 Internal Combustion Engine Division Fall Technical Conference. New York: ASME, 2017: 1-9.
    [108]
    MAHMOUD K G, KNAUS O, PARIKYAN T, et al. An integrated model for the performance of piston ring pack in internal combustion engines[J]. Proceedings of the Institution of Mechanical Engineers, Part K: Journal of Multi-body Dynamics, 2017, 22(3): 371-384.
    [109]
    LYU Yan-jun, LI Sha, WANG Peng, et al. The analysis of secondary motion and lubrication performance of piston considering the piston skirt profile[J]. Shock and Vibration, 2018, 2018: 3240469-1-27.
    [110]
    XU Xiao-hua. Influence of piston-bore clearance on second motion characteristics of piston and skirt wear[J]. Mechanics and Industry, 2019, 20(2): 1-7.
    [111]
    LI Rui, MENG Xiang-hui, LI Wen-da, et al. A new comprehensive tribo-dynamic analysis for lubricated translational joints in low-speed two-stroke marine engines[J]. International Journal of Engine Research, 2020, 21(8): 1336-1361.
    • Relative Articles
    • Supplements(0)
    • Cited By
  • 加载中

Catalog

    通讯作者: 陈斌, bchen63@163.com
    • 1. 

      沈阳化工大学材料科学与工程学院 沈阳 110142

    1. 本站搜索
    2. 百度学术搜索
    3. 万方数据库搜索
    4. CNKI搜索
    Get Citation
    PDF
    XML

    Article Metrics

    Article views (958) PDF downloads(856) Cited by()
    Proportional views
    Related

    Copyright《Journal of Traffic and Transportation Engineering》编辑部陕ICP备05001904号-1

    Address ：Editorial Department of Journal of Traffic and Transportation Engineering, Chang 'an University, Middle Section of South Second Ring Road, Xi 'an, Shaanxi（710064） Tel：029-82334388 Email：jygc@chd.edu.cn

    All visit:Today's visit:

    Supported by: Beijing Renhe Information Technology Co. Ltd    

    /

    DownLoad:  Full-Size Img  PowerPoint
    Return
    Return