Volume 20 Issue 6
. 
Turn off MathJax
Article Contents
Article Navigation >  Journal of Traffic and Transportation Engineering  > 2020  >  20(6): 180-196
SHEN Hao-sheng, ZHANG Jun-dong, YANG Bo-cheng, JIA Bao-zhu, GAN Hui-bing. Zonal modeling method for mass flow of large-scale marine compressor[J]. Journal of Traffic and Transportation Engineering, 2020, 20(6): 180-196. doi: 10.19818/j.cnki.1671-1637.2020.06.016
Citation: SHEN Hao-sheng, ZHANG Jun-dong, YANG Bo-cheng, JIA Bao-zhu, GAN Hui-bing. Zonal modeling method for mass flow of large-scale marine compressor[J]. Journal of Traffic and Transportation Engineering, 2020, 20(6): 180-196. doi: 10.19818/j.cnki.1671-1637.2020.06.016
shu

Zonal modeling method for mass flow of large-scale marine compressor

doi: 10.19818/j.cnki.1671-1637.2020.06.016
  • 1.

    Marine Engineering College, Dalian Maritime University, Dalian 116026, Liaoning, China

  • 2.

    Navigation College, Dalian Maritime University, Dalian 116026, Liaoning, China

  • 3.

    Maritime College, Guangdong Ocean University, Zhanjiang 524088, Guangdong, China

Funds:

National Natural Science Foundation of China 52071090

National Natural Science Foundation of China 51479017

Natural Science Foundation of Liaoning Province 201602071

Fundamental Research Funds for the Central Universities 3132019315

More Information
  • Author Bio:

    SHEN Hao-sheng(1989-), male, doctoral student, shen7231591@126.com

    ZHANG Jun-dong(1967-), male, professor, PhD, 493187643@qq.com

  • Received Date: 2020-06-01
  • Publish Date: 2020-06-25
    Abstract
  • To address the problems of unreliability of extrapolation when using a look-up table and inconsistent accuracy in prediction and extrapolation when using a single curve-fitting method in different operating zones of a compressor, a zonal modeling method was proposed for the mass flow of a large-scale marine compressor. After a zone division function was defined, the entire operating area of compressor was divided into the design, low-speed, high-speed, and low-pressure ratio zones. Following a comparison and analysis of the accuracies of prediction and extrapolation with the classical and proposed compressor mass flow models, a mathematical model with the highest accuracy was selected for each zone. A curve blending method was adopted to guarantee a smooth transition of the iso-speed line to prevent the possible discontinuity when the operating point enters the low pressure ratio zone from other operating zones during the dynamic simulation process. To validate the correctness and effectiveness of the proposed modeling method, it was applied to the simulation experiment of a large-scale low-speed two-stroke marine diesel engine model conducted under steady and transient operating conditions. Research result shows that compared with the look-up table method, the proposed modeling method can effectively improve the steady-state prediction accuracy of turbocharger rotational speed for the main engine simulation model, while reducing the mean absolute percentage error from 3.54% to 0.61%. The operating point of compressor can transition steadily and continuously from the design operating zone to the non-design operating zones under the transient operating condition when the speed and load of main engine change. The proposed modeling method not only accurately predicts the existing sample data points in the design operating zone of compressor, it also reasonably and robustly extrapolates the data to the non-design operating zones. The method can be applied directly to dynamic simulation research of turbocharged engines, and can be used to generate the compressor performance map for the full range of operating conditions offline. Accordingly, the method can be used in commercial engine performance simulation software.

     

    • FullText(HTML)
  • loading
    • References(31)
  • [1]
    SONG Kang, UPADHYAY D, XIE Hui. A physics-based turbocharger model for automotive diesel engine control application[J]. Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering, 2019, 233(7): 1667-1686. doi: 10.1177/0954407018770569
    [2]
    TABURRI M, CHIARA F, CANOVA M, et al. A model-based methodology to predict the compressor behavior for the simulation of turbocharged engines[J]. Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering, 2012, 226(4): 560-574. doi: 10.1177/0954407011420790
    [3]
    李先南, 黄立, 张文正, 等. 两级增压对船用柴油机性能影响的试验[J]. 内燃机学报, 2020, 38(2): 104-109. https://www.cnki.com.cn/Article/CJFDTOTAL-NRJX202002002.htm

    LI Xian-nan, HUANG Li, ZHANG Wen-zheng, et al. Experiment of the influence of two stage turbocharging on the performance of a marine diesel engine[J]. Transactions of CSICE, 2020, 38(2): 104-109. (in Chinese). https://www.cnki.com.cn/Article/CJFDTOTAL-NRJX202002002.htm
    [4]
    LLAMAS X, ERIKSSON L. Parameterizing compact and extensible compressor models using orthogonal distance minimization[J]. Journal of Engineering for Gas Turbines and Power, 2016, 139(1): 012601.
    [5]
    沈浩生, 张均东, 杨柏丞, 等. 一种考虑传热现象的船用压气机等熵效率分区域建模方法[J]. 船舶工程, 2020, 42(7): 76-87. https://www.cnki.com.cn/Article/CJFDTOTAL-CANB202007021.htm

    SHEN Hao-sheng, ZHANG Jun-dong, YANG Bai-cheng, et al. A zonal modeling approach of marine compressor isentropic efficiency with consideration of heat transfer phenomenon[J]. Ship Engineering, 2020, 42(7): 76-87. (in Chinese). https://www.cnki.com.cn/Article/CJFDTOTAL-CANB202007021.htm
    [6]
    涂环. 大型船舶柴油机推进系统建模及转速控制研究[D]. 武汉: 武汉理工大学, 2015.

    TU Huan. Investigation on the modelling and speed control of marine diesel engine propulsion system[D]. Wuhan: Wuhan University of Technology, 2015. (in Chinese).
    [7]
    MORAAL P, KOLMANOVSKY I. Turbocharger modeling for automotive control applications[J]. SAE Technical Papers, 1999, DOI: 10.4271/1999-01-0908.
    [8]
    GHOLAMREZAEI M, GHORBANIAN K. Compressor map generation using a feed-forward neural network and rig data[J]. Proceedings of the Institution of Mechanical Engineers, Part A: Journal of Power and Energy, 2010, 224(1): 97-108. doi: 10.1243/09576509JPE792
    [9]
    管聪. 大型船舶降速航行主机性能优化方法研究[D]. 武汉: 武汉理工大学, 2015.

    GUAN Cong. Investigation on the performance optimisation method for large containership propulsion engine at slow steaming conditions[D]. Wuhan: Wuhan University of Technology, 2015. (in Chinese).
    [10]
    JENSEN J P, KRISTENSEN A F, SORENSON S C, et al. Mean value modeling of a small turbocharged diesel engine[J]. SAE Technical Papers, 1991, DOI: 10.4271/910070.
    [11]
    ERIKSSON L. Modeling and control of turbocharged SI and DI engines[J]. Oil and Gas Science and Technology, 2007, 62(4): 523-538. doi: 10.2516/ogst:2007042
    [12]
    DOWELL P G, AKEHURST S. Advanced mapping techniques for radial compressor for use in real-time engine models[J]. SAE Technical Papers, 2010, DOI: 10.4271/2010-01-1227.
    [13]
    HADEF J E, COLIN G, CHAMAILLARD Y, et al. Physical-based algorithms for interpolation and extrapolation of turbocharger data maps[J]. SAE International Journal of Engines, 2012, 5(2): 363-378. doi: 10.4271/2012-01-0434
    [14]
    MARTIN G, TALON V. Implementing turbomachinery physics into data map-based turbocharger models[J]. SAE International Journal of Engines, 2009, 2(1): 211-229. doi: 10.4271/2009-01-0310
    [15]
    MALKHEDE D N, SETH B, DHARIWAL H C. Mean value model and control of a marine turbocharged diesel engine[J]. SAE Technical Papers, 2005, DOI: 10.4271/2005-01-3889.
    [16]
    KARLSON A T. On modeling of a ship propulsion system for control purposes[D]. Trondheim: Norwegian University of Science and Technology, 2012.
    [17]
    DINESCU D C, TAZEROUT M. Mean value modeling of a variable nozzle turbocharger (VNT)[J]. UPB Scientific Bulletin, Series D: Mechanical Engineering, 2010, 72(1): 109-116.
    [18]
    ZENG Tao, UPADHYAY D, ZHU Guo-ming. A reduced complexity model for the compressor power of an automotive turbocharger[J]. Journal of Dynamic Systems, Measurement and Control, 2018, 140(6): 061018. doi: 10.1115/1.4039285
    [19]
    ERIKSSON L, NEZHADALI V, ANDERSSON C. Compressor flow extrapolation and library design for the modelica vehicle propulsion library-vehprolib[J]. SAE Technical Papers, 2016, DOI: 10.4271/2016-01-1037.
    [20]
    MÜLLER M, HENDRICKS E, SORENSON S C. Mean value modeling of turbocharged spark ignition engines[J]. SAE Technical Papers, 1998, DOI: 10.4271/980784.
    [21]
    LEUFVÉN O, ERIKSSON L. A surge and choke capable compressor flow model-validation and extrapolation capability[J]. Control Engineering Practice, 2013, 21(12): 1871-1883. doi: 10.1016/j.conengprac.2013.07.005
    [22]
    LEUFVÉN O, ERIKSSON L. Measurement, analysis and modeling of centrifugal compressor flow for low pressure ratios[J]. International Journal of Engine Research, 2014, 17(2): 153-168.
    [23]
    LLAMAS X, ERIKSSON L. Control-oriented compressor model with adiabatic efficiency extrapolation[J]. SAE International Journal of Engines, 2017, 10(4): 1903-1916. doi: 10.4271/2017-01-1032
    [24]
    ORIKISZ M, STAWARS S. Modeling of turbine engine axial-flow compressor and turbine characteristics[J]. Journal of Propulsion and Power, 2000, 16(2): 336-339. doi: 10.2514/2.5574
    [25]
    ANDERSSON P. Air charge estimation in turbocharged spark ignition engines[D]. Linköping: Linköping University, 2005.
    [26]
    BITEUS J. Mean value engine model of a heavy duty diesel engine[D]. Linköping: Linköping University, 2004.
    [27]
    GUZZELLA L, AMSTUTZ A. Control of diesel engines[J]. IEEE Control Systems Magazine, 1998, 18(5): 53-71. doi: 10.1109/37.722253
    [28]
    SIEROS G, STAMATIS A, MATHIOUDAKIS K. Jet engine component maps for performance modeling and diagnosis[J]. Journal of Propulsion and Power, 1997, 13(5): 665-674. doi: 10.2514/2.5218
    [29]
    FANG Xian-de, CHEN Wei-wei, ZHOU Zhan-ru, et al. Empirical models for efficiency and mass flow rate of centrifugal compressors[J]. International Journal of Refrigeration, 2014, 41: 190-199. doi: 10.1016/j.ijrefrig.2014.03.005
    [30]
    YANG Bei, FANG Xian-de, ZHANG Li-sheng, et al. Applicability of empirical models of isentropic efficiency and mass flow rate of dynamic compressors to jet engines[J]. Progress in Aerospace Sciences, 2019, 106: 32-42. doi: 10.1016/j.paerosci.2019.01.007
    [31]
    TANG Yuan-yuan, ZHANG Jun-dong, GAN Hui-bing, et al. Development of a real-time two-stroke marine diesel engine model with in-cylinder pressure prediction capability[J]. Applied Energy, 2017, 197: 55-70.
    • Relative Articles
    • Supplements(0)
    • Cited By
  • 加载中

Catalog

    通讯作者: 陈斌, bchen63@163.com
    • 1. 

      沈阳化工大学材料科学与工程学院 沈阳 110142

    1. 本站搜索
    2. 百度学术搜索
    3. 万方数据库搜索
    4. CNKI搜索
    Get Citation
    PDF
    XML

    Article Metrics

    Article views (470) PDF downloads(153) Cited by()
    Proportional views
    Related

    Copyright《Journal of Traffic and Transportation Engineering》编辑部陕ICP备05001904号-1

    Address ：Editorial Department of Journal of Traffic and Transportation Engineering, Chang 'an University, Middle Section of South Second Ring Road, Xi 'an, Shaanxi（710064） Tel：029-82334388 Email：jygc@chd.edu.cn

    All visit:Today's visit:

    Supported by: Beijing Renhe Information Technology Co. Ltd    

    /

    DownLoad:  Full-Size Img  PowerPoint
    Return
    Return