Volume 24 Issue 6
Dec.  2024
Turn off MathJax
Article Contents
Article Navigation >  Journal of Traffic and Transportation Engineering  > 2024  >  24(6): 106-120
LIU Jun-ping, YANG Qian, LIU Hua-long, YANG Yi-tu, CHEN Bao-chun. Stress concentration characteristics of concrete-filled steel tubular truss-rib K-joint with inner studs[J]. Journal of Traffic and Transportation Engineering, 2024, 24(6): 106-120. doi: 10.19818/j.cnki.1671-1637.2024.06.007
Citation: LIU Jun-ping, YANG Qian, LIU Hua-long, YANG Yi-tu, CHEN Bao-chun. Stress concentration characteristics of concrete-filled steel tubular truss-rib K-joint with inner studs[J]. Journal of Traffic and Transportation Engineering, 2024, 24(6): 106-120. doi: 10.19818/j.cnki.1671-1637.2024.06.007
shu

Stress concentration characteristics of concrete-filled steel tubular truss-rib K-joint with inner studs

doi: 10.19818/j.cnki.1671-1637.2024.06.007
  • 1.

    College of Civil Engineering, Fuzhou University, Fuzhou 350116, Fujian, China

  • 2.

    CCCC second Harbor Engineering Co., Ltd., Wuhan 430014, Hubei, China

Funds:

National Natural Science Foundation of China 52078136

More Information
  • Author Bio:

    LIU Jun-ping(1977-), male, professor, PhD, liujunping@fzu.edu.cn

  • Received Date: 2024-06-19
  • Publish Date: 2024-12-25
    Abstract
  • To further study the influence of setting inner studs on the stress distribution of concrete-filled steel tubular truss-rib K-joints, a test on the stress concentration characteristics was conducted. The hot spot stress and stress concentration factor of joints without inner studs were compared and tested. The fine finite element models of the joints with inner studs were established. The influences of the arrangement and geometric dimensions of inner studs on the stress concentration factor were analyzed. Based on the results of the test and the finite element parameter analysis, the recommended layout of the inner stud and the calculation method of the stress concentration factor of the joints were proposed. Research results show that the hot spot stress distribution of the joints is not changed with the inner studs, and the maximum stress concentration factor is found at the crown point of the main tube in the tensile weld area, but the stress concentration degree of the joints effectively reduces. Compared with the joint without inner studs, the maximum hot spot stress of the joint with inner studs reduces by 17.38%. The overall stress concentration factors of the main tube side and the corresponding branch tube side in the tensile weld area decrease by 24.20% and 12.30% on average, respectively, and the circumferential section stress of the main tube decreases by 16.2%. The influence of inner studs on the stress distribution and stress concentration in the compressive weld area is so slight to be within 7%. The stress concentration factors are affected greatly by the circumferential arrangement angle and the axial arrangement spacing of inner studs but less by the geometrical dimension of inner studs. The inner studs are suggested to be arranged within the range of approximately 2.7 times the diameter of the branch tube from the center of the joint to each side section in the axial direction of the main tube. The circumferential arrangement is within the range of [-60°, 60°] of the central angle of connecting branch tube side. At the same time, the interval between adjacent studs should not be less than 6 times the diameter of the inner stud but not more than 400 mm. The calculation formula of the stress concentration factor introduced by the influence coefficient of axial arrangement and circumferential arrangement of inner studs can be used in evaluating the fatigue performance of concrete-filled steel tubular truss-rib K-joints with inner studs with high calculation accuracy.

     

    • FullText(HTML)
  • loading
    • References(34)
  • [1]
    ZHENG Jie-lian, WANG Jian-jun. Concrete-filled steel tube arch bridges in China[J]. Engineering, 2018(4): 143-155.
    [2]
    LIU Jun-ping, LI Xiao-fang, LIU Hua-long, et al. Recent application and development of concrete-filled steel tube arch bridges in China[C]//ICACE. The 6th International Conference on Architecture and Civil Engineering. Kuala Lumpur: ICACE, 2022: 263-272.
    [3]
    林春姣, 郑皆连, 秦荣. 钢管混凝土拱肋混凝土脱空研究综述[J]. 中外公路, 2005, 24(6): 54-58.

    LIN Chun-jiao, ZHENG Jie-lian, QIN Rong. Research review on incompletion filling of concrete-filled steel tubular arch rib[J]. Journal of China and Foreign Highway, 2005, 24(6): 54-58. (in Chinese)
    [4]
    涂光亚. 脱空对钢管混凝土拱桥受力性能影响研究[D]. 长沙: 湖南大学, 2008.

    TU Guang-ya. Separation effect on mechanical behavior of concrete-filled steel tubular arch bridge[D]. Changsha: Hunan University, 2008. (in Chinese)
    [5]
    XUE Jun-qing, BRISEGHELLA B, CHEN Bao-chun. Effects of debonding on circular CFST stub columns[J]. International Journal of Constructional Steel Research, 2012, 69: 64-76. doi: 10.1016/j.jcsr.2011.08.002
    [6]
    SCHNABLS, JELENIC G, PLANINC I. Analytical buckling of slender circular concrete-filled steel tubular columns with compliant interfaces[J]. Journal of Constructional Steel Research, 2015(115): 252-262.
    [7]
    MYERS P T, BRENNAN F P, DOVER W D. The effect of rack/rib plate on the stress concentration factors in jack-up chords[J]. Marine Structures, 2001, 14(4/5): 485-505.
    [8]
    刘永健, 姜磊, 熊治华, 等. PBL加劲型矩形钢管混凝土受拉节点热点应力集中系数计算方法[J]. 交通运输工程学报, 2017, 17(5): 1-15. doi: 10.3969/j.issn.1671-1637.2017.05.001

    LIU Yong-jian, JIANG Lei, XIONG Zhi-hua, et al. Hot spot SCF computation method of concrete-filled and PBL-stiffened rectangular hollow section joint subjected to axial tensions[J]. Journal of Traffic and Transportation Engineering, 2017, 17(5): 1-15. (in Chinese) doi: 10.3969/j.issn.1671-1637.2017.05.001
    [9]
    LIU Yong-jian, XIONG Zhi-hua, FENG Yun-cheng, et al. Concrete-filled rectangular hollow section X joint with Perfobond Leister rib structural performance study: ultimate and fatigue experimental investigation[J]. Steel and Composite Structures, 2017, 24(4): 455-465.
    [10]
    陈宝春, 陈津凯. 钢管混凝土内栓钉抗剪承载力试验研究[J]. 工程力学, 2016, 33(2): 66-73.

    CHEN Bao-chun, CHEN Jin-kai. Experimental studies on shear-bearing capacity of headed stud in concrete-filled steel tube[J]. Engineering Mechanics, 2016, 33(2): 66-73. (in Chinese)
    [11]
    刘君平, 陈津凯, 陈宝春. 钢管混凝土桁肋内栓钉相贯节点受力行为试验研究[J]. 工程力学, 2017, 34(9): 150-157.

    LIU Jun-ping, CHEN Jin-kai, CHEN Bao-chun. Experimental studies on load-transferring mechanism of CFST directly-welded K-joints with studs[J]. Engineering Mechanics, 2017, 34(9): 150-157. (in Chinese)
    [12]
    陈津凯, 陈宝春, 刘君平. 钢管混凝土多排多列内栓钉受剪性能[J]. 工程力学, 2017, 34(6): 178-189.

    CHEN Jin-kai, CHEN Bao-chun, LIU Jun-ping. Shear performance of multi-studs between steel tube and core concrete[J]. Engineering Mechanics, 2017, 34(6): 178-189. (in Chinese)
    [13]
    刘新华, 帅少辉, 彭元诚. 总溪河大桥主桥结构设计[J]. 桥梁建设, 2016, 46(5): 95-99.

    LIU Xin-hua, SHUAI Shao-hui, PENG Yuan-cheng. Structural design of main bridge of Zongxi River Bridge[J]. Bridge Construction, 2016, 46(5): 95-99. (in Chinese)
    [14]
    林新元, 董向前, 刘冠之, 等. 钢管混凝土拱桥内置栓钉的防脱空研究[J]. 施工技术, 2017, 46(增): 854-857.

    LIN Xin-yuan, DONG Xiang-qian, LIU Guan-zhi, et al. Study on anti-void at interface of concrete filled steel tube arch bridges built-in studs[J]. Construction Technology, 2017, 46(S): 854-857. (in Chinese)
    [15]
    刘琪, 聂尚杰, 丁少凌, 等. 重庆渝湘复线双堡特大桥主桥设计[J]. 桥梁建设, 2023, 53(增1): 16-24.

    LIU Qi, NIE Shang-jie, DING Shao-ling, et al. Design of main bridge of Shuangbao Bridge of Second Chongqing-Hunan Railway in Chongqing[J]. Bridge Construction, 2023, 53(S1): 16-24. (in Chinese)
    [16]
    MUSA I A, MASHIRI F R, ZHU Xin-qun. Fatigue behaviour of concrete-filled steel tubular joints—a review[J]. International Journal of Lifecycle Performance Engineering, 2016, 2(1/2): 22-60.
    [17]
    姜磊, 刘永健, 王康宁, 等. 焊接管节点结构形式发展及疲劳性能对比[J]. 建筑结构学报, 2019, 40(3): 180-191.

    JIANG Lei, LIU Yong-jian, WANG Kang-ning, et al. Development of welded tubular joints and comparison of fatigue behaviour[J]. Journal of Building Structures, 2019, 40(3): 180-191. (in Chinese)
    [18]
    姜磊, 刘永健, 龙辛, 等. 基于热点应力法的矩形钢管混凝土组合桁梁桥节点疲劳评估[J]. 交通运输工程学报, 2020, 20(6): 104-116. doi: 10.19818/j.cnki.1671-1637.2020.06.009

    JIANG Lei, LIU Yong-jian, LONG Xin, et al. Fatigue assessment of joints in concrete-filled rectangular hollow section composite truss bridges based on hot spot stress method[J]. Journal of Traffic and Transportation Engineering, 2020, 20(6): 104-116. (in Chinese) doi: 10.19818/j.cnki.1671-1637.2020.06.009
    [19]
    姜磊, 刘永健, 刘彬, 等. 基于热点应力法的钢管混凝土桁式拱桥节点疲劳评估[J]. 桥梁建设, 2022, 52(3): 69-76.

    JIANG Lei, LIU Yong-jian, LIU Bin, et al. Joint fatigue assessment of concrete-filled steel tubular arch bridge based on hot spot stress method[J]. Bridge Construction, 2022, 52(3): 69-76. (in Chinese)
    [20]
    ZHENG Jian, NAKAMURA S, GE Ya-jing, et al. Formulation of stress concentration factors for concrete-filled steel tubular (CFST) T-joints under axial force in the brace[J]. Engineering Structures, 2018, 170: 103-117.
    [21]
    TONG L W, CHEN K P, XU G W, et al. Formulae for hot-spot stress concentration factors of concrete-filled CHS T-joints based on experiments and FE analysis[J]. Thin-Walled Structures, 2019, 136: 113-128.
    [22]
    XU Fei, CHEN Ju, JIN Wei-liang. Experimental investigation of SCF distribution for thin-walled concrete-filled CHS joints under axial tension loading[J]. Thin-Walled Structures, 2015, 93: 149-157. http://smartsearch.nstl.gov.cn/paper_detail.html?id=417951e1941ba865805b56f65c522938
    [23]
    KIM I G, CHUNG C H, SHIM C S, et al. Stress concentration factors of N-joints of concrete-filled tubes subjected to axial loads[J]. International Journal of Steel Structures, 2014, 14(1): 1-11.
    [24]
    孙传祺. 钢管混凝土K型间隙焊接节点热点应力与承载力试验研究[D]. 上海: 同济大学, 2008.

    SUN Chuan-qi. Studies on hot spot stress and ultimate capacity of CFST welded K-joints with gap[D]. Shanghai: Tongji University, 2008. (in Chinese)
    [25]
    姜磊, 刘永健, 龙辛, 等. 矩形钢管混凝土桁架节点应力集中特性试验研究[J]. 建筑结构学报, 2022, 43(2): 184-196, 214.

    JIANG Lei, LIU Yong-jian, LONG Xin, et al. Experimental study on stress concentration characteristics of joints in concrete-filled rectangular steel tubular truss[J]. Journal of Building Structures, 2022, 43(2): 184-196, 214. (in Chinese)
    [26]
    陈康明, 黄汉辉, 吴庆雄, 等. 钢管混凝土K形节点应力集中系数计算方法[J]. 土木工程学报, 2022, 55(12): 94-104.

    CHEN Kang-ming, HUANG Han-hui, WU Qing-xiong, et al. Calculation method of stress concentration factor for CFST K-joint[J]. China Civil Engineering Journal, 2022, 55(12): 94-104. (in Chinese)
    [27]
    CHEN Kang-ming, WU Qing-xiong, HUANG Han-hui, et al. Fatigue performance test and finite-element analysis of concrete-filled steel-tube K-joints[J]. Journal of Bridge Engineering, 2023, 28(3): 04023003.
    [28]
    HUANG Wen-jin, FENU L, CHEN Bao-chun, et al. Experimental study on K-joints of concrete-filled steel tubular truss structures[J]. Journal of Constructional Steel Research, 2015, 107: 182-193.
    [29]
    吴庆雄, 郑樵风, 陈康明, 等. 阵列式布设内栓钉的钢管混凝土K型节点足尺模型疲劳性能研究[J]. 土木工程学报, 2022, 55(2): 31-49, 72.

    WU Qing-xiong, ZHENG Qiao-feng, CHEN Kang-ming, et al. Study on fatigue performance of full-scale model of concrete-filled steel tubular K-joints with array-aligned internal studs[J]. China Civil Engineering Journal, 2022, 55(2): 31-49, 72. (in Chinese)
    [30]
    袁剑鸣. 钢管混凝土节点内栓钉传力机理及对桁拱受力性能影响研究[D]. 福州: 福州大学, 2018.

    YUAN Jian-ming. Study on transfer mechanism of inner studs and impact on mechanical behavior of concrete-filled steel tubular truss arch ribs[D]. Fuzhou: Fuzhou University, 2018. (in Chinese)
    [31]
    韩林海, 冯九斌. 混凝土的本构关系模型及其在钢管混凝土数值分析中的应用[J]. 哈尔滨建筑大学学报, 1995(5): 26-32.

    HAN Lin-hai, FENG Jiu-bin. Constitutive relation model of concrete and the application in numerical analysis of concrete-filled steel tube members[J]. Journal of Harbin University of Civil Engineering and Architecture, 1995(5): 26-32. (in Chinese)
    [32]
    高春彦, 杨卫平, 李斌. 圆钢管混凝土K型焊接相贯节点力学性能数值模拟[J]. 西安建筑科技大学学报(自然科学版), 2018, 50(1): 18-22.

    GAO Chun-yan, YANG Wei-ping, LI Bin, et al. Numerical simulation on the mechanical behavior of the concrete-filled circular steel tubular welded K-joints[J]. Journal of Xi'an University of Architecture and Technology (Natural Science Edition), 2018, 50(1): 18-22. (in Chinese)
    [33]
    童乐为, 陈昆鹏, ZHAO Xiao-ling. 钢管混凝土桁架节点疲劳性能研究进展[J]. 钢结构, 2014(增): 60-67.

    TONG Le-wei, CHEN Kun-peng, ZHAO Xiao-ling. Research advance in fatigue behavior of concrete-filled tubular truss joints[J]. Steel Construction, 2014(S): 60-67. (in Chinese)
    [34]
    CHEN Kang-ming, HUANG Han-hui, ZHENG Qiao-feng, et al. Experimental research on the calculating method of stress concentration factor for CFST K-joint[J]. Journal of Structural Engineering, 2023, 149(3): 04023006.
    • Relative Articles
    • Supplements(0)
    • Cited By
  • 加载中

Catalog

    通讯作者: 陈斌, bchen63@163.com
    • 1. 

      沈阳化工大学材料科学与工程学院 沈阳 110142

    1. 本站搜索
    2. 百度学术搜索
    3. 万方数据库搜索
    4. CNKI搜索
    Get Citation
    PDF
    XML

    Article Metrics

    Article views (62) PDF downloads(9) Cited by()
    Proportional views
    Related

    Copyright《Journal of Traffic and Transportation Engineering》编辑部陕ICP备05001904号-1

    Address ：Editorial Department of Journal of Traffic and Transportation Engineering, Chang 'an University, Middle Section of South Second Ring Road, Xi 'an, Shaanxi（710064） Tel：029-82334388 Email：jygc@chd.edu.cn

    All visit:Today's visit:

    Supported by: Beijing Renhe Information Technology Co. Ltd    

    /

    DownLoad:  Full-Size Img  PowerPoint
    Return
    Return