Template design method and its application in the integrated highway CAD system

XU Jin-liang

Volume 2 Issue 1

Turn off MathJax

Article Contents

Article Navigation > Journal of Traffic and Transportation Engineering > 2002 > 2(1): 48-50

Next Previous

XU Jin-liang. Template design method and its application in the integrated highway CAD system[J]. Journal of Traffic and Transportation Engineering, 2002, 2(1): 48-50.

Citation:

XU Jin-liang. Template design method and its application in the integrated highway CAD system[J]. Journal of Traffic and Transportation Engineering, 2002, 2(1): 48-50.

XU Jin-liang. Template design method and its application in the integrated highway CAD system[J]. Journal of Traffic and Transportation Engineering, 2002, 2(1): 48-50.

Citation:

XU Jin-liang. Template design method and its application in the integrated highway CAD system[J]. Journal of Traffic and Transportation Engineering, 2002, 2(1): 48-50.

PDF( 130 KB)

Template design method and its application in the integrated highway CAD system

XU Jin-liang

School of Highway, Chang′an University, Xi′an 710064, China

More Information

Author Bio:
XU Jin-liang(1966-), male, associate professor, a doctorial student of Chang′an University, engaged in research of routine selection automation, highway CAD, system simulation
Received Date: 2001-11-15
Publish Date: 2002-03-25

Abstract

Abstract

Through the analysis and study on the design object, this paper presents an object template and component template design method for highway design, it also presents the data sturcture for the cross section component template based on the highway cross section design. This method has been used in the development of the integrated highway CAD system. The application results show that the template design method has the characters of direct, simple and convenient.
- template,
- integrated highway CAD system,
- object template,
- component template

FullText(HTML)

References(4)

References

[1]	LIUXiao -ping, TIAN Jing -cheng. The research of methodology based on template in engineering CAD [J]. Computer Aided Design and Graphics Journal, 1999, 11(4): 296-299.
[2]	YANG Zhi -hui, QIAO Xiao -xia. The Design and realization of multifunctional parameterization template[J]. Computer Aided Design and Manufacturing, 1998, 10(2): 54-56.
[3]	XU Jin-liang. CAD method for cross section of interchange ramp and joint area[J]. Journal of Xi'an Highway University, 2001, 21(2): 63-65.
[4]	YANG Hong-zhi. The data structure in integrated CAD system of highway[J]. Journal of Xi'an Highway University, 2001, 21(2): 60-62.