Pulse control measure methods of internal resistance for battery in electric vehicle

ZHANG Wei-gang; ZHANG Wei-feng; REN Wei-jun; BIAN Yao-zhang

Volume 7 Issue 6

Turn off MathJax

Article Contents

Article Navigation > Journal of Traffic and Transportation Engineering > 2007 > 7(6): 36-40

Next Previous

ZHANG Wei-gang, ZHANG Wei-feng, REN Wei-jun, BIAN Yao-zhang. Pulse control measure methods of internal resistance for battery in electric vehicle[J]. Journal of Traffic and Transportation Engineering, 2007, 7(6): 36-40.

Citation:

ZHANG Wei-gang, ZHANG Wei-feng, REN Wei-jun, BIAN Yao-zhang. Pulse control measure methods of internal resistance for battery in electric vehicle[J]. Journal of Traffic and Transportation Engineering, 2007, 7(6): 36-40.

Citation:

PDF( 322 KB)

Pulse control measure methods of internal resistance for battery in electric vehicle

1.
School of Information Engineering, Chang'an University, Xi'an 710064, Shaanxi, China
2.
School of Automobile, Chang'an University, Xi'an 710064, Shaanxi, China

More Information

Author Bio:
Zhang Wei-gang(1960-), male, EngD, professor, +86-29-82334547, wgzhang@chd.edu.cn
Received Date: 2007-06-19
Publish Date: 2007-12-25

Abstract

Abstract

In order to estimate the health state of battery and calculate the running distance of electric vehicle (EV), two pulse control measure methods were put forward to for the online test of internal resistance for battery.Measure circuit and battery were insulated by using optical coupling set and transformer, a series of pluses were put out by microcomputer unit (MCU), constant current signal was generated by battery controlled by optical coupling set, voltage signal caused by current signal in the internal resistance was sent to MCU through transformer, and MCU could calculate the internal resistance according to the phase difference between voltage and current (method 1) or voltage difference (method 2).Computation result shows that the errors of internal resistance for a 12V lead-acid battery are about 13% and 11% respectively calculated by using method 1 and method 2, the errors are less, so two pulse control methods are feasible.
- vehicle engineering,
- electric vehicle,
- internal resistance of battery,
- pulse control measure methods

FullText(HTML)

References(10)

References

[1]	Xia Yong. Study of instrument for testingtheinternal i mped-ance of battery on line[J]. Telecom Power Technologies, 2003, 20 (6): 35-38. (in Chinese) https://www.cnki.com.cn/Article/CJFDTOTAL-TXDY200306010.htm
[2]	Meng Liang-rong, Wang Jin-liang. Status and developingtrends of the batteries for electric vehicles[J]. Chinese Bat-tery Industry, 2006, 11 (3): 202-206. (in Chinese) https://www.cnki.com.cn/Article/CJFDTOTAL-DCGY200603015.htm
[3]	Zhang Wei-gang, Jian Xiao-ping, Bi Li-ge, et al. Residualquantity calculation method of EV battery[J]. Journal ofTraffic and Transportation Engineering, 2004, 4 (1): 50-53. (in Chinese) http://transport.chd.edu.cn/article/id/200401013
[4]	Zhang Hong-yan, Gao Ming-yu. Application of the AVR-MCUin a testing device of residual quantity of a cell[J]. Ap-plication of Electronic Technique, 2001, 27 (2): 20-22. (in Chinese) https://www.cnki.com.cn/Article/CJFDTOTAL-DZJY200102005.htm
[5]	Meissner E, Richter G. Battery monitoring and electrical en-ergy management preconditionfor future vehicle electric pow-er systems[J]. Journal of Power Sources, 2003, 116 (1/2): 79-98.
[6]	Shukla A K, Ganesh K V, Munichandraiah N, et al. Amethod to monitor valve-regulated lead acid cells[J]. Journalof Power Sources, 1998, 74 (2): 234-239.
[7]	Lagarias J C, Reeds J A, Wright P E. Convergence proper-ties of neder-mead si mplex method in low di mensions[J]. SLAMJournal of Opti mization, 1998, 9 (1): 112-147.
[8]	Guo Hang, Ma Chong-fang, Wang Mao-hai, et al. Development of fuel cells and application in electric vehicles in China[J]. China Journal of Highway and Transport, 2004, 17(1): 106-109. (in Chinese) https://www.cnki.com.cn/Article/CJFDTOTAL-ZGGL200401026.htm
[9]	Zhang Wei-gang, Jian Xiao-ping, Geng Li-min, et al. Test ofelectric vehicle reformed fromoil-fueled automobile[J]. Jour-nal of Chang an University: Natural Science Edition, 2006, 26 (5): 74-78. (in Chinese) https://www.cnki.com.cn/Article/CJFDTOTAL-XAGL200605017.htm
[10]	Zhu Zheng-li, Yin Cheng-liang, Zhang Jian-wu. Applicationof CANbus systemin hybrid electric vehicle[J]. Journal ofTraffic and Transportation Engineering, 2004, 4 (3): 90-94. (in Chinese) http://transport.chd.edu.cn/article/id/200403021