Citation: | Liu Xi-dong, Ma Jian, Guo Rong-qing. Sensitivity analysis method of vehicle steering system under braking condition[J]. Journal of Traffic and Transportation Engineering, 2008, 8(3): 20-23. |
[1] |
Hac A, Bodie M O. I mprovements in vehicle handling through integrated control of chassis systems[J]. International Journal of Vehicle Autonomous Systems, 2002, 11 (1): 83-110.
|
[2] |
Pilutti T, Ulsoy G, Hrovat D, et al. Vehicle steering intervention through differential braking[J]. Transactions of the ASME, 1998, 120 (9): 314-321.
|
[3] |
李胜, 林逸. 汽车转向轮摆振研究[J]. 汽车技术, 2004, 35 (11): 16-19. https://www.cnki.com.cn/Article/CJFDTOTAL-QCJS200411004.htm
Li Sheng, Lin Yi. Study on shimmy of automotive steering wheels[J]. Automotive Technology, 2004, 35 (11): 16-19. (in Chinese) https://www.cnki.com.cn/Article/CJFDTOTAL-QCJS200411004.htm
|
[4] |
贺丽娟, 林逸. 汽车操纵稳定性与前轮摆振的非线性仿真分析[J]. 汽车工程, 2007, 29 (5): 389-392. doi: 10.3321/j.issn:1000-680X.2007.05.007
He Li-juan, Lin Yi. Nonlinear simulation on vehicle handling stability and front wheel shimmy[J]. Automotive Engineering, 2007, 29 (5): 389-392. (in Chinese) doi: 10.3321/j.issn:1000-680X.2007.05.007
|
[5] |
韩同群, 邹汉华. EQ2102越野汽车前轮摆振影响因素试验分析及改进措施[J]. 汽车技术, 2007, 38 (1): 34-37. https://www.cnki.com.cn/Article/CJFDTOTAL-QCJS200701009.htm
Han Tong-qun, Zou Han-hua. The experi mental study and analysis of influence factors on front wheel shimmy and improving measure of EQ2120 off-road vehicle[J]. Automotive Technology, 2007, 38 (1): 34-37. (in Chinese) https://www.cnki.com.cn/Article/CJFDTOTAL-QCJS200701009.htm
|
[6] |
顾款. 考虑转向系间隙的汽车前轮摆振系统研究[D]. 合肥: 合肥工业大学, 2007.
|
[7] |
郭孔辉. 汽车操纵动力学[M]. 长春: 吉林科学技术出版社, 1991.
|
[8] |
王志宏. 后钢板弹簧悬架变形对传动轴最大滑出量的影响[J]. 汽车工程, 2001, 23 (3): 167-171. https://www.cnki.com.cn/Article/CJFDTOTAL-QCGC200103006.htm
Wang Zhi-hong. The Effect of deformation of rear leaf-spring suspension on the variation of total length of propeller shaft[J]. Automotive Engineering, 2001, 23 (3): 167-171. (in Chinese) https://www.cnki.com.cn/Article/CJFDTOTAL-QCGC200103006.htm
|
[9] |
孙家广. 计算机图形学[M]. 北京: 清华大学出版社, 1998.
|
[10] |
GB12676—1999, 汽车制动系统结构、性能和试验方法[S].
|