Identifying method of geometry parameters for oversize vehicle

Zhang Wen-hui; Guan Qiang; Deng Hong-xing; Li Sheng-qin

Volume 8 Issue 3

Turn off MathJax

Article Contents

Article Navigation > Journal of Traffic and Transportation Engineering > 2008 > 8(3): 97-100

Next Previous

Zhang Wen-hui, Guan Qiang, Deng Hong-xing, Li Sheng-qin. Identifying method of geometry parameters for oversize vehicle[J]. Journal of Traffic and Transportation Engineering, 2008, 8(3): 97-100.

Citation:

Zhang Wen-hui, Guan Qiang, Deng Hong-xing, Li Sheng-qin. Identifying method of geometry parameters for oversize vehicle[J]. Journal of Traffic and Transportation Engineering, 2008, 8(3): 97-100.

Zhang Wen-hui, Guan Qiang, Deng Hong-xing, Li Sheng-qin. Identifying method of geometry parameters for oversize vehicle[J]. Journal of Traffic and Transportation Engineering, 2008, 8(3): 97-100.

Citation:

Zhang Wen-hui, Guan Qiang, Deng Hong-xing, Li Sheng-qin. Identifying method of geometry parameters for oversize vehicle[J]. Journal of Traffic and Transportation Engineering, 2008, 8(3): 97-100.

PDF( 543 KB)

Identifying method of geometry parameters for oversize vehicle

School of Traffic, Northeast Forestry University, Harbin 150040, Heilongjiang, China

More Information

Author Bio:
Zhang Wen-hui(1978-), male, lecturer, +86-451-89828255, rayear@163.com
Received Date: 2007-11-15
Publish Date: 2008-06-25

Abstract

Abstract

In order to improve the precision of inspecting oversize transportation, identifying method of geometry parameters for oversize vehicle was proposed. Vehicle was scanned by using two laser measurement sensors respectively to acquire the half outlines of vehicle and the coordinates of all inspecting points, the height and width of vehicle were computed according to the minimum abscissa of left outline, the maximal abscissa of right outline and the minimum ordinate of two outlines, the whole outline of vehicle was gained by using outline synthetic method, vehicle length was identified according to the datum marks consisted of light curtain and light-electricity switch and was compared with the standard of oversize transportation. Computation result shows that inspecting error is within ±3%, vehicle license is stored in time, so the precision of the method is higher, and inspecting result is intuitionistic.
- traffic transportation,
- oversize vehicle,
- identifying method of geometry parameter,
- laser measurement sensor

FullText(HTML)

References(13)

References

[1]	Cai Feng-tian, Han Guo-qing, Wang Zhu-peng. The effects of overloading on fuel consumption and emission of motor vehicle[J]. Journal of Highway and Transportation Research and Development, 2004, 21(9): 131-135. (in Chinese) https://www.cnki.com.cn/Article/CJFDTOTAL-GLJK200409034.htm
[2]	Zhang Hong-wei, Wang Wen-long. Safty analysis of oversize and overloadin road transport[J]. Journal of Highway and Transportation Research and Development, 2004, 21(3): 132-136. (in Chinese) https://www.cnki.com.cn/Article/CJFDTOTAL-GLJK200403035.htm
[3]	Li Wan-heng. Discussion on highway bridge damage caused by overload[J]. Journal of Highway and Transportation Research and Development, 2004, 21(4): 130-132. (in Chinese) doi: 10.3969/j.issn.1002-0268.2004.04.036
[4]	Zong Xue-mei, Hu Da-lin, Gao Jun. Vehicle s overload and li miting load standard for bridge safety[J]. Journal of Chang an University: Natural Science Edition, 2008, 28(1): 61-65. (in Chinese) doi: 10.3969/j.issn.1671-6248.2008.01.013
[5]	Zeng Fan-qi, Huang Xiao-ming. Asphalt pavement stress under overloading[J]. Journal of Traffic and Transportation Engineering, 2004, 4(3): 8-10. (in Chinese) doi: 10.3321/j.issn:1671-1637.2004.03.003
[6]	Wang Guo-qing, Hu Guo-sheng. Study on loading based tollcollection theory and practice[J]. Journal of Highway and Transportation Research and Development, 2001, 18(1): 91-93. (in Chinese) https://www.cnki.com.cn/Article/CJFDTOTAL-GLJK200101024.htm
[7]	Wang Jian-wei, Ma Jian, Yang Ming. Pricing theory model on toll-by-weight turnpike[J]. China Journal of Highway and Transport, 2004, 17(3): 98-101. (in Chinese) https://www.cnki.com.cn/Article/CJFDTOTAL-ZGGL200403020.htm
[8]	Chen Yin-san. Long-term effective solution to the overload transportation with economic lever[J]. China Journal of Highway and Transport, 2004, 17(2): 94-99. (in Chinese) https://www.cnki.com.cn/Article/CJFDTOTAL-ZGGL200402021.htm
[9]	Li Zhong-kui, Rong Chao-he. Research onlong-termsolution mechanism and counter-measure to overload and oversize transportation of highway[J]. China Journal of Highway and Transport, 2005, 18(4): 96-99. (in Chinese) https://www.cnki.com.cn/Article/CJFDTOTAL-ZGGL200504019.htm
[10]	Casavant K, Lenzi J. An economic evaluation of the fee and fine structure for overloaded trucks in Washington[J]. Transportation Quarterly, 1993, 47(2): 281-294.
[11]	Mohammadi J. Statistical evaluation of truck overloads[J]. Transportation England, 1992, 118(5): 651-665.
[12]	Xiong Jun, Zhong Si-dong, Mao Qing-zhou. Inspection of out-of-gauge of freight train ends with the application of measurement light curtain[J]. Rolling Stock, 2005, 43(11): 35-37. (in Chinese) https://www.cnki.com.cn/Article/CJFDTOTAL-TDCL200511012.htm
[13]	Bian Xiao-dong, Zhang Wei-gong, Guo Zhan-jun. Vehicle dimensions measurement based on vision servoing technology[J]. Automotive Engineering, 2004, 26(3): 341-344. (in Chinese) https://www.cnki.com.cn/Article/CJFDTOTAL-QCGC200403023.htm