Volume 8 Issue 5
. 
Turn off MathJax
Article Contents
Article Navigation >  Journal of Traffic and Transportation Engineering  > 2008  >  8(5): 38-43
WANG Jian, YAO Zhen-qiang, BAO Qi-fan, ZHU Jian-long, LEI Xin-hua, WANG Xiao-ping. New performance evaluation method of grab ship unloader[J]. Journal of Traffic and Transportation Engineering, 2008, 8(5): 38-43.
Citation: WANG Jian, YAO Zhen-qiang, BAO Qi-fan, ZHU Jian-long, LEI Xin-hua, WANG Xiao-ping. New performance evaluation method of grab ship unloader[J]. Journal of Traffic and Transportation Engineering, 2008, 8(5): 38-43.
shu

New performance evaluation method of grab ship unloader

  • 1.

    State Key Laboratory of Mechanical System and Vibration, Shanghai Jiaotong University, Shanghai 200240, China

  • 2.

    Shanghai International Port(Group) Co.Ltd., Shanghai 200082, China

  • 3.

    Shanghai Luojing Ore Terminal Co.Ltd., Shanghai 200942, China

  • 4.

    Wuhan Quality Supervision and Testing Center for Port Machinery, Wuhan 430063, Hubei, China

More Information
  • Author Bio:

    WANG Jian (1980-), male, doctoral student, +86-21-34206583, wjconan@yahoo.corn.cn

    YA0 Zhen-qiang (1962-), male, professor, +86-21-34206315, zqyao@SjtU.edu.cn

  • Received Date: 2008-03-26
  • Publish Date: 2008-10-25
    Abstract
  • The productivity calculation methods of different grab ship unloaders were analyzed, the advantages, disadvantages and applicability were compared, a new performance evaluation method was presented based on mechanical performance calculation approaches.The validity rules of testing record were established, some modified coefficients were defined to eliminate the influence of uncertain factors such as material attributes and operation conditions.Calculation result shows that the rating productivity of automatic operation mode is increased by 3.12% than that of manumal mode, and actual productivity is increased by 7.97%, so the evaluation result is acturate, and the new method can easily compare the automation degrees of different manipulation modes.

     

    • FullText(HTML)
  • loading
    • References(11)
  • [1]
    赵海炎. 桥式抓斗卸船机生产率分析[J]. 重工与起重技术, 2007, 4(2): 16-17.

    ZHAO Hai-yan. Productivity analysis on bridge grab shipunloader[J]. Heavy Industrial and Hoisting Machinery, 2007, 4(2): 16-17. (in Chinese)
    [2]
    严立, 朱新河, 严志军, 等. 面向21世纪的交通运输机械设备维修现状与展望[J]. 交通运输工程学报, 2001, 1(2): 47-51. http://transport.chd.edu.cn/article/id/200102013

    YAN Li, ZHU Xin-he, YAN Zhi-jun, et al. The status and prospect of transportation machine equipment repairing in 21th century[J]. Journal of Traffic and Transportation Engineering, 2001, 1(2): 47-51. (in Chinese) http://transport.chd.edu.cn/article/id/200102013
    [3]
    翟琳. 抓斗卸船机生产率的合理计算[J]. 港口科技动态, 1998, 20(1): 9-11. https://www.cnki.com.cn/Article/CJFDTOTAL-GKKJ199801003.htm

    ZHAI Lin. Rational calculation on productivity of grab shipunloader[J]. Science and Technology of Ports, 1998, 20(1): 9-11. (in Chinese) https://www.cnki.com.cn/Article/CJFDTOTAL-GKKJ199801003.htm
    [4]
    GB/T3811—1983, 起重机设计规范[S].
    [5]
    GB 5905—1986, 起重机试验规范和程序[S].
    [6]
    GB/T14838—2001, 港口起重机验收试验规则[S].
    [7]
    JIS B8809—2004, calculationfor unloading capacity of unloader[S].
    [8]
    徐大伟. 谈抓斗卸船机的实际生产率[J]. 上海港科技, 2000(2): 1-3.

    XU Da-wei. Discussion on actual productivity of grab shipunloader[J]. Shanghai Port Technology, 2000(2): 1-3. (in Chinese)
    [9]
    李路妹, 王悦民. 双料斗桥式抓斗卸船机的计算[J]. 起重运输机械, 2007(7): 48-52. doi: 10.3969/j.issn.1001-0785.2007.07.017

    LI Lu-mei, WANG Yue-min. Calculation of double-hopper grab ship unloader[J]. Hoisting and Conveying Machinery, 2007(7): 48-52. (in Chinese) doi: 10.3969/j.issn.1001-0785.2007.07.017
    [10]
    真虹. 第四代港口的概念及其推行方式[J]. 交通运输工程学报, 2005, 5(4): 90-95. http://transport.chd.edu.cn/article/id/200504019

    ZHEN Hong. Conception of fourth generation port and itsi mplementation methods[J]. Journal of Traffic and Transportation Engineering, 2005, 5(4): 90-95. (in Chinese) http://transport.chd.edu.cn/article/id/200504019
    [11]
    肖汉斌, 雷新华, 王小平, 等. 上海港罗泾矿石码头装卸装备单机与综合作业能力测试检验报告[R]. 武汉: 武汉港口机械质量监督检验测试中心, 2008.
    • Relative Articles
    • Supplements(0)
    • Cited By
  • 加载中

Catalog

    通讯作者: 陈斌, bchen63@163.com
    • 1. 

      沈阳化工大学材料科学与工程学院 沈阳 110142

    1. 本站搜索
    2. 百度学术搜索
    3. 万方数据库搜索
    4. CNKI搜索
    Get Citation
    PDF
    XML

    Article Metrics

    Article views (369) PDF downloads(310) Cited by()
    Proportional views
    Related

    Copyright《Journal of Traffic and Transportation Engineering》编辑部陕ICP备05001904号-1

    Address ：Editorial Department of Journal of Traffic and Transportation Engineering, Chang 'an University, Middle Section of South Second Ring Road, Xi 'an, Shaanxi（710064） Tel：029-82334388 Email：jygc@chd.edu.cn

    All visit:Today's visit:

    Supported by: Beijing Renhe Information Technology Co. Ltd    

    /

    DownLoad:  Full-Size Img  PowerPoint
    Return
    Return