Stress redistribution of RC beams strengthened with prestressed hybrid carbon/glass(C/G)fiber cloth

ZHANG Jian; YE Jian-shu; WANG Jing-quan; AI Jun; GAO Qi

Volume 17 Issue 1

Turn off MathJax

Article Contents

Article Navigation > Journal of Traffic and Transportation Engineering > 2017 > 17(1): 45-52

Next Previous

ZHANG Jian, YE Jian-shu, WANG Jing-quan, AI Jun, GAO Qi. Stress redistribution of RC beams strengthened with prestressed hybrid carbon/glass(C/G)fiber cloth[J]. Journal of Traffic and Transportation Engineering, 2017, 17(1): 45-52.

Citation:

ZHANG Jian, YE Jian-shu, WANG Jing-quan, AI Jun, GAO Qi. Stress redistribution of RC beams strengthened with prestressed hybrid carbon/glass(C/G)fiber cloth[J]. Journal of Traffic and Transportation Engineering, 2017, 17(1): 45-52.

Citation:

PDF( 572 KB)

Stress redistribution of RC beams strengthened with prestressed hybrid carbon/glass(C/G)fiber cloth

1.
School of Aerospace Engineering, Nanjing University of Aeronautics and Astronautics, Nanjing 210016, Jiangsu, China
2.
School of Transportation, Southeast University, Nanjing 210096, Jiangsu, China
3.
China Design Group Co., Ltd., Nanjing 210014, Jiangsu, China

More Information

Author Bio:
ZHANG Jian(1978-), male, associate professor, PhD, +86-25-84892003, jianzhang78@126.com
Received Date: 2016-06-10
Publish Date: 2017-02-25

Abstract

Abstract

Based on solid degraded shell element, the layered shell element model was adopted for reinforced concrete (RC) beam and hybrid carbon/glass (C/G) fiber cloth, the combined shell element model was used for longitudinal reinforcement, and the prestress effect of hybrid C/G fiber cloth was simulated.A kind of nonlinear layered shell combined element for RC beam strengthened with prestressed hybrid C/G fiber cloth was established.The nonlinear effects of cracking, yielding and crushing of RC beam were described by cracking mode, Ottosen yielding criterion and Hinton crushing criterion.The changing rule of deflection, the reduction rule of stiffness and the ultimate bearing capacity of strengthened beam were analyzed, and the stress redistribution of hybrid C/G fiber cloth was studied.Calculation result shows that the nonlinearlayer shell combined element analysis method is reliable, the relative error between the calculated value of characteristic load of strengthened beam and its experimental value is not more than10%, and the nonlinear layered shell combined element has good convergence and numerical stability.Before the strengthened beam reaches cracking load, the stress redistribution coefficient of hybrid C/G fiber cloth changes little and is equal to 1.3at cracking load.Then it increases gradually, is equal to 4.1at yielding load and is equal to 14.8at ultimate loads.When the beam is strengthened with common hybrid C/G fiber cloth, the high-strength property of fiber cloth cannot be fully used, and the utility degree is about 83%.When the beam is strengthened with prestressed hybrid C/G fiber cloth, the structural system of beam be improved, the high-strength property of fiber cloth can be well used, and the utility degree exceeds to 90%.
- bridge engineering,
- hybrid carbon/glass (C/G) fiber cloth,
- prestress,
- reinforced concrete beam,
- layered shell combined element

FullText(HTML)

References(28)

References

[1]	LU Yi-yan, HU Ling, LIANG Hong-jun, et al. Experimental research on flexural fatigue behavior of RC beams strengthened with combination of CFRP and steel plates[J]. Journal of Building Structures, 2015, 36 (11): 64-71. (in Chinese). https://www.cnki.com.cn/Article/CJFDTOTAL-JZJB201511010.htm
[2]	JIANG Sheng-hua, HOU Jiang-guo, HE Ying-ming. Reliability research of serviceability limit states for RC beams strengthened with prestressed CFRP sheets considering prestress loss[J]. China Civil Engineering Journal, 2015, 48 (11): 36-43. (in Chinese). https://www.cnki.com.cn/Article/CJFDTOTAL-TMGC201511006.htm
[3]	LIU Xiao-yan, YAN Dong-huang, ZHANG Feng, et al. Ultimate load analysis of prestressed high strength concrete beam[J]. China Journal of Highway and Transport, 2006, 19 (1): 58-61. (in Chinese). https://www.cnki.com.cn/Article/CJFDTOTAL-ZGGL200601011.htm
[4]	AL-HAMMOUD R, SOUDKI K, TOPPER T H. Fatigue flexural behavior of corroded reinforced concrete beams repaired with CFRP sheets[J]. Journal of Composites for Construction, 2011, 15 (1): 42-51. doi: 10.1061/(ASCE)CC.1943-5614.0000144
[5]	KURTZ S, BALAGURU P, HELM J. Experimental study of interfacial shear stresses in FRP-strengthened RC beams[J]. Journal of Composites for Construction, 2008, 12 (3): 312-322. doi: 10.1061/(ASCE)1090-0268(2008)12:3(312)
[6]	XUE Wei-chen, ZHENG Qiao-wen, YANG Yu. Calculation method for deflection of concrete beams reinforced with FRP rebars[J]. Journal of Hydraulic Engineering, 2008, 39 (7): 883-888, 894. (in Chinese). https://www.cnki.com.cn/Article/CJFDTOTAL-SLXB200807017.htm
[7]	FRAGIACOMO M, AMADIO C, MACORINI L, et al. Finite-element model for collapse and long-term analysis of steel-concrete composite beams[J]. Journal of Structural Engineering, 2004, 130 (3): 489-497. doi: 10.1061/(ASCE)0733-9445(2004)130:3(489)
[8]	DENG Lin-zhong, GHOSN M, ZNIDARIC A, et al. Nonlinear flexural behavior of prestressed concrete girder bridges[J]. Journal of Bridge Engineering, 2001, 6 (4): 276-284. doi: 10.1061/(ASCE)1084-0702(2001)6:4(276)
[9]	SEBASTION W M, MECONNEL R E. Nonlinear FE analysis of steel-concrete composite structures[J]. Journal of Structural Engineering, 2000, 126 (6): 662-674. doi: 10.1061/(ASCE)0733-9445(2000)126:6(662)
[10]	CHUNG W, SOTELINO E D. Nonlinear finite-element analysis of composite steel girder bridges[J]. Journal of Structural Engineering, 2005, 131 (2): 304-313. doi: 10.1061/(ASCE)0733-9445(2005)131:2(304)
[11]	LEE W T, CHIOU Y J, SHIH M H. Reinforced concrete beam-column joint strengthened with carbon fiber reinforced polymer[J]. Composite Structures, 2010, 92 (1): 48-60. doi: 10.1016/j.compstruct.2009.06.011
[12]	YE Jian-shu, ZHANG Jian, HUANG Jian-feng. Analysis of ultimate loads of prestressed concrete multi-T girder bridge[J]. Journal of Southeast University: Natural Science Edition, 2009, 39 (1): 106-111. (in Chinese). https://www.cnki.com.cn/Article/CJFDTOTAL-DNDX200901021.htm
[13]	ZHANG Jian, YE Jian-shu, ZHANG Feng, et al. Mechanical behavior of prestressed concrete T beam based on mixed shell element method[J]. Journal of Traffic and Transportation Engineering, 2007, 7 (4): 79-83. (in Chinese). http://transport.chd.edu.cn/article/id/200704017
[14]	SEZEN H. Repair and strengthening of reinforced concrete beamcolumn joints with fiber-reinforced polymer composites[J]. Journal of Composites for Construction, 2012, 16 (5): 499-506.
[15]	DENG Zong-cai, LI Jian-hui. Experimental and theoretical research on flexural performance of RC beams strengthened with hybrid fiber sheet[J]. Engineering Mechanics, 2009, 26 (2): 115-123, 130. (in Chinese). https://www.cnki.com.cn/Article/CJFDTOTAL-GCLX200902023.htm
[16]	WANG Dong, AI Jun, WANG Jun, et al. The key technical research in concrete bridge consolidation with prestressed hybrid CFRP/GFRP sheet[R]. Nanjing: Nanjing University of Aeronautics and Astronautics, 2013. (in Chinese).
[17]	SHEN De-jian, DENG Shu-cheng, ZHANG Jin-yang, et al. Behavior of reinforced concrete box beam with initial cracks repaired with basalt fiber-reinforced polymer sheet[J]. Journal of Reinforced Plastics and Composites, 2015, 34 (18): 1540-1554.
[18]	ZHANG Feng. Research of structural behavior of PC continuous box girders[D]. Nanjing: Southeast University, 2007. (in Chinese).
[19]	MARI A R, OLLER E, BAIRAN J M, et al. Simplified method for the calculation of long-term deflections in FRPstrengthened reinforced concrete beams[J]. Composites Part B: Engineering, 2013, 45 (1): 1368-1376.
[20]	RAFI M M, NADJAI A. A suggested model for European code to calculate deflection of FRP reinforced concrete beams[J]. Magazine of Concrete Research, 2011, 63 (3): 197-214.
[21]	MIAS C, TORRES L, TURON A, et al. Effect of material properties on long-term deflections of GFRP reinforced concrete beams[J]. Construction and Building Materials, 2013, 41 (2): 99-108.
[22]	MIAS C, TORRES L, TURON A, et al. Experimental study of immediate and time-dependent deflections of GFRP reinforced concrete beams[J]. Composite Structures, 2013, 96 (4): 279-285.
[23]	KARA I F, DUNDAR C. Prediction of deflection of high strength steel fiber reinforced concrete beamsand columns[J]. Computers and Concrete, 2012, 9 (2): 133-151.
[24]	MOHAMED H M, MASMOUDI R. Deflection prediction of steel and FRP-reinforced concrete-filled FRP tube beams[J]. Journal of Composites for Construction, 2011, 15 (3): 462-472.
[25]	MARI A R, OLLER E, BAIRAN J M. Predicting the response of FRP-strengthened reinforced-concrete flexural members with nonlinear evolutive analysis models[J]. Journal of Composites for Construction, 2011, 15 (5): 799-809.
[26]	OUYANG Li-jun, LU Zhou-dao, CHEN Wei-zhen. Flexural experimental study on continuous reinforced concrete beams strengthened with basalt fiber reinforced polymer/plastic[J]. Journal of Shanghai Jiaotong University: Science, 2012, 17 (5): 613-618.
[27]	LI Shi-qiu, WANG Hou-zhi, HU Xin-min. Influencing factors on durability and counter measure of bridge prestressed concrete structure[J]. Road Machinery and Construction Mechanization, 2007, 24 (6): 41-43, 52. (in Chinese). https://www.cnki.com.cn/Article/CJFDTOTAL-ZLJX200706021.htm
[28]	WANG Dan, GUO Zhi-kun, SHAO Fei, et al. Experimental study on LC beams strengthened with hybrid fiber sheets[J]. Journal of Chang'an University: Natural Science Edition, 2016, 36 (2): 52-58. (in Chinese. https://www.cnki.com.cn/Article/CJFDTOTAL-XAGL201602008.htm