Volume 20 Issue 2
. 
Turn off MathJax
Article Contents
Article Navigation >  Journal of Traffic and Transportation Engineering  > 2020  >  20(2): 15-33
Next Previous
HE Liang, ZHAN Cheng-yang, LU: Song-tao, GAO Jie, XIE Jun, LING Tian-qing. Application status of steel slag asphalt mixture[J]. Journal of Traffic and Transportation Engineering, 2020, 20(2): 15-33. doi: 10.19818/j.cnki.1671-1637.2020.02.002
Citation: HE Liang, ZHAN Cheng-yang, LU: Song-tao, GAO Jie, XIE Jun, LING Tian-qing. Application status of steel slag asphalt mixture[J]. Journal of Traffic and Transportation Engineering, 2020, 20(2): 15-33. doi: 10.19818/j.cnki.1671-1637.2020.02.002
shu

Application status of steel slag asphalt mixture

doi: 10.19818/j.cnki.1671-1637.2020.02.002
  • 1.

    National and Local Joint Engineering Laboratory of Traffic Civil Engineering Materials, Chongqing Jiaotong University, Chongqing 400074, China

  • 2.

    Key Laboratory of Special Environment Road Engineering of Hunan Province, Changsha University of Science and Technology, Changsha 410114, Hunan, China

  • 3.

    The Australian Road Research Board, Melbourne VIC3207, Victoria, Australia

  • 4.

    Faculty of Civil Engineering, Warsaw University of Technology, Warsaw 00-637, Mazowieckie, Poland

  • 5.

    Faculty of Civil Engineering, Czech Technical University in Prague, Prague 16629, Czech

  • 6.

    State Key Laboratory of Silicate Materials for Architectures, Wuhan University of Technology, Wuhan 430070, Hubei, China

  • 7.

    The Laboratory for Asphalts and Bitumen-Based Products, Slovenian National Building and Civil Engineering Institute, Ljubljana SI1000, Slovenia

Funds:

China-Poland Inter-Governmental S & T Cooperation Foundation 37-135

CChina-Czech Inter-Governmental S & T Cooperation Foundation 43-9

National Natural Science Foundation of China 51611130189

Chongqing Graduate Student Research Innovation Project CYS19238

Open Fund of Key Laboratory of Special Environment Road Engineering of Hunan Province kfj17050

More Information
  • Author Bio:

    HE Liang(1983-)male, associate professor, PhD, E-mail: heliangf1@163.com

  • Received Date: 2019-10-23
  • Publish Date: 2020-04-25
    Abstract
  • The physical properties, chemical composition and mineral phases of different steel slags were summarized. The factors that affect the volume stability and improvement measures were analysed. The mix design method for steel slag asphalt mixtures was discussed. The road performance(high temperature stability, low temperature crack resistance, moisture susceptibility, fatigue resistance, volume stability, and skid resistance) and functional characteristics(conductivity and microwave heating ability) of steel slag asphalt mixture were all investigated. The benefits of steel slag asphalt mixtures in ecology, society and economy were studied, and the engineering applications at home and abroad were introduced. Research result indicates that certain steel slag can be used for asphalt mixtures, and the steel slag for asphalt mixtures should be the basic oxygen furnace and electric arc furnace aged for more than half a year. The steel slag has excellent physical and mechanical properties, whilst the chemical composition and mineral phase composition are different for each slag type and affected by the steel making process. The lack of volume stability of steel slag can be improved with a pre-treatment or aging treatment. The key points of mix design of steel slag asphalt mixture include the mode and proportion of steel slag that can replace traditional aggregates, the gradation correction of asphalt mixture, the determination of effective relative density and the optimum asphalt-aggregate ratio. The pavement performances and functional properties of steel slag asphalt mixtures are better than those of natural aggregate asphalt mixtures. The use of steel slag asphalt mixture is of benefit to the environment and saves cost.The research on the road performance of steel slag asphalt mixture is additional, but the mechanism of action is relatively lacking. The key limiting factors such as the large density, poor volume stability, and the increasing amount of asphalt mixture have not been fundamentally resolved. In the future, the long-term performance and quality control system of steel slag asphalt pavement should be researched, and the whole life cycle research should be carried out to accelerate the application and promotion of steel slag asphalt pavement.

     

    • FullText(HTML)
  • loading
    • References(101)
  • [1]
    WANG Chuan. Study on the surface modification technology of steel slag and the performance of modified steel slag asphalt mixture[D]. Kunming: Kunming University of Science and Technology, 2018. (in Chinese).
    [2]
    GUO Jian-long, BAO Yan-ping, WANG Min. Steel slag in China: treatment, recycling, and management[J]. Waste Management, 2018, 78: 318-330. doi: 10.1016/j.wasman.2018.04.045
    [3]
    KAVUSSI A, QAZIZADEH M J. Fatigue characterization of asphalt mixes containing electric arc furnace (EAF) steel slag subjected to long term aging[J]. Construction and Building Materials, 2014, 72: 158-166. doi: 10.1016/j.conbuildmat.2014.08.052
    [4]
    YILDIRIM Z I, PREZZI M. Steel slag: chemistry, mineralogy, and morphology[J]. Geotechnical Special Publication, 2015, 256: 2816-2825.
    [5]
    WANG G. Determination of the expansion force of coarse steel slag aggregate[J]. Construction and Building Materials, 2010, 24(10): 1961-1966. doi: 10.1016/j.conbuildmat.2010.04.004
    [6]
    XIE Jun. Research on the preparation, performance and application of basic oxygen furnace slag based asphalt concrete[D]. Wuhan: Wuhan University of Technology, 2013. (in Chinese).
    [7]
    SOFILIC T, MLADENOVIC A, SOFILIC U. Characterization of the EAF steel slag as aggregate for use in road construction[J]. Chemical Engineering Transactions, 2010, 19: 117-123.
    [8]
    AMELIAN S, MANIAN M, ABTAHI S M, et al. Moisture sensitivity and mechanical performance assessment of warm mix asphalt containing by-product steel slag[J]. Journal of Cleaner Production, 2018, 176: 329-337. doi: 10.1016/j.jclepro.2017.12.120
    [9]
    PRETI F, NOTO S, ACCARDO C, et al. Effect of hyper-modified asphalt binder and steel slags on cracking and rutting behaviour of wearing course mixtures[J]. Road Materials and Pavement Design, 2019, 20: 678-694. doi: 10.1080/14680629.2019.1633746
    [10]
    SKAF M, ORTEGA-LOPEZ V, FUENTE-ALONSO J A, et al. Ladle furnace slag in asphalt mixes[J]. Construction and Building Materials, 2016, 122: 488-495. doi: 10.1016/j.conbuildmat.2016.06.085
    [11]
    XUE Yong-jie, WU Shao-peng. Research on experimental of pavement performance of steel slag SMA[J]. Highway, 2006(2): 126-129. (in Chinese). https://www.cnki.com.cn/Article/CJFDTOTAL-GLGL200602028.htm
    [12]
    HAININ M R, AZIZ M M A, ALI Z, et al. Steel slag as a road construction material[J]. Journal Teknologi (Sciences and Engineering), 2015, 73(4): 33-38.
    [13]
    DÍAZ R O, FARFÁN M R, CARDENAS J, et al. Use of steel slag as a new material for roads[J]. Journal of Physics: Conference Series, 2017, 935: 11-16.
    [14]
    Construction Division Pavements Office. Use of steel slag aggregate in pavements[R]. Washington DC: Washington State DOT, 2015.
    [15]
    YILDIRIM I Z, PREZZI M. Experimental evaluation of EAF ladle steel slag as a geo-fill material: mineralogical, physical and mechanical properties[J]. Construction and Building Materials, 2017, 154: 23-33. doi: 10.1016/j.conbuildmat.2017.07.149
    [16]
    DHOBLE Y N, AHMED S. Review on the innovative uses of steel slag for waste minimization[J]. Journal of Material Cycles and Waste Management, 2018, 20(3): 1373-1382. doi: 10.1007/s10163-018-0711-z
    [17]
    LI Chao, CHEN Zong-wu, XIE Jun, et al. A technological and applicational review on steel slag asphalt mixture[J]. Materials Review, 2017, 31(2): 86-95, 122. (in Chinese). https://www.cnki.com.cn/Article/CJFDTOTAL-CLDB201703015.htm
    [18]
    CHEN Zong-wu, XIE Jun, XIAO Xue, et al. Characteristics of bonding behavior between basic oxygen furnace slag and asphalt binder[J]. Construction and Building Materials, 2014, 64: 60-66. doi: 10.1016/j.conbuildmat.2014.04.074
    [19]
    SHI Cai-jun. Steel slag—its production, processing, characteristics, and cementitious properties[J]. Journal of Materials in Civil Engineering, 2004, 16(3): 230-236. doi: 10.1061/(ASCE)0899-1561(2004)16:3(230)
    [20]
    ZHAO Ji-hui, YAN Pei-yu, WANG Dong-min. Research on mineral characteristics of converter steel slag and its comprehensive utilization of internal and external recycle[J]. Journal of Cleaner Production, 2017, 156: 50-61. doi: 10.1016/j.jclepro.2017.04.029
    [21]
    LI Guang-hui, WU Bin, ZHANG Yuan-bo, et al. Mineralogical characteristics and comprehensive utilization of converter steel slag[J]. Journal of Central South University (Science and Technology), 2010, 41(6): 2065-2071. (in Chinese). https://www.cnki.com.cn/Article/CJFDTOTAL-ZNGD201006004.htm
    [22]
    PRAVEEN K, SATISH K, MARUTIRAM K, et al. Pilot-scale steam aging of steel slags[J]. Waste Management and Research, 2017, 35(6): 602-609. doi: 10.1177/0734242X17694247
    [23]
    LI Can-hua, XIANG Xiao-dong, ZHOU Xi-ying. Investigation of performance of porous open graded steel slag asphalt mixture[J]. Journal of Building Materials, 2015, 18(1): 168-171. (in Chinese). doi: 10.3969/j.issn.1007-9629.2015.01.030
    [24]
    QAZIZADEH M J, FARHAD H, KAVUSSI A, et al. Evaluating the fatigue behavior of asphalt mixtures containing electric arc furnace and basic oxygen furnace slags using surface free energy estimation[J]. Journal of Cleaner Production, 2018, 188: 355-361. doi: 10.1016/j.jclepro.2018.04.035
    [25]
    AMERI M, HESAMI S, GOLI H. Laboratory evaluation of warm mix asphalt mixtures containing electric arc furnace (EAF) steel slag[J]. Construction and Building Materials, 2013, 49: 611-617. doi: 10.1016/j.conbuildmat.2013.08.034
    [26]
    OLUWASOLA E A, HAININ M R, AZIZ M M A. Evaluation of asphalt mixtures incorporating electric arc furnace steel slagand copper mine tailings for road construction[J]. Transportation Geotechnics, 2015, 2: 47-55. doi: 10.1016/j.trgeo.2014.09.004
    [27]
    PASETTO M, BALIELLO A, GIACOMELLO G, et al. Rheological characterization of warm-modifies asphalt mastics containing electric arc furnace steel slags[J]. Advances in Materials Science and Engineering, 2016, 3: 1-11.
    [28]
    SANTAMARÍA A, ROJÍ E, SKAF M, et al. The use of steelmaking slags and fly ash in structural mortars[J]. Construction and Building Materials, 2016, 106: 364-373. doi: 10.1016/j.conbuildmat.2015.12.121
    [29]
    ZUMRAWI M M E, KHALILL F O A. Experimental study of steel slag used as aggregate in asphalt mixture[J]. International Journal of Civil and Environmental Engineering, 2015, 9(6): 753-758.
    [30]
    MAHARAJ C, WHITE D, MAHARAJ R, et al. Re-use of steel slag as an aggregate to asphaltic road pavement surface[J]. Cogent Engineering, 2017, 4: 1-12.
    [31]
    ZHAO Ji-hui, YAN Pei-yu. Volume stability and stabilization treatment of steel slag in China[J]. Bulletin of the Chinese Ceramic Society, 2017, 36(2): 477-484. (in Chinese). https://www.cnki.com.cn/Article/CJFDTOTAL-GSYT201702011.htm
    [32]
    YILDIRIM I Z, PREZZI M. Geotechnical properties of fresh and aged basic oxygen furnace steel slag[J]. Journal of Materials in Civil Engineering, 2015, 27(12): 1-11.
    [33]
    WEI Long-hua, QI Xian-jin, ZHU Xing, et al. Influence of pretreatment on the free CaO in steel slag[J]. Materials Science Forum, 2017, 904: 162-166. doi: 10.4028/www.scientific.net/MSF.904.162
    [34]
    XUE Yong-jie, WU Shao-peng, HOU Hai-bo, et al. Experimental investigation of basic oxygen furance slag used as aggregate in asphalt mixture[J]. Journal of Hazardous Materials, 2006, 138: 261-268. doi: 10.1016/j.jhazmat.2006.02.073
    [35]
    YILDIRIM I Z. Use of steel slag in subgrade applications[D]. West Lafayette: Purdue University, 2009.
    [36]
    FERREIRA V J, VILAPLANA A S D G, GARCIA-ARMINGOL T, et al. Evaluation of the steel slag incorporation as coarse aggregate for road construction: technical requirements and environmental impact assessment[J]. Journal of Cleaner Production, 2016, 130: 175-186. doi: 10.1016/j.jclepro.2015.08.094
    [37]
    KANDA K, MORISITA S, HAMASAKI T. Pressurized steam aging process for steel slag[J]. SEAISI Quarterly, 2011, 40(1): 25-28.
    [38]
    ZHAO Qing-lin, STARK J, FREYBURG E, et al. Steam and autoclave treatments on structure characteristics of steel slag[J]. Advanced Materials Research, 2012, 356-360: 1919-1927.
    [39]
    DAYIOGLU A Y, AYDILEK A H. Evaluation of mitigation techniques for the expansive behavior of steel slag[J]. Geotechnical Frontiers, 2017, 276: 360-368.
    [40]
    LU Fa-liang, LI Jin. Study on gradation characteristics of steel slag asphalt mixture[J]. Highway, 2013(7): 222-227. (in Chinese). doi: 10.3969/j.issn.0451-0712.2013.07.050
    [41]
    LIU Si, HUA Zhou-lian, JIAO Li-xin, et al. Study on the effects of water-washed steel slag SMA performance[J]. WISCO Technology, 2014, 52(5): 36-39. (in Chinese). doi: 10.3969/j.issn.1008-4371.2014.05.014
    [42]
    NIU Zhe. Research on preparation and performance of steel slag asphalt pavement[D]. Nanjing: Southeast University, 2016. (in Chinese).
    [43]
    XU Ding-bing. The material and performance research of steel slag asphalt mixtures[D]. Nanjing: Southeast University, 2018. (in Chinese).
    [44]
    LIAO Yu-chun, WANG Yuan-yuan, JI Zheng-jun. Study on a new method for determining the effective relative density of porous steel slag[J]. Journal of China and Foreign Highway, 2013, 33(3): 216-218. (in Chinese). doi: 10.3969/j.issn.1671-2579.2013.03.056
    [45]
    WANG Ya-ting. Study on application of steel slag aggregate in ultra-thin against sliding wear layer[D]. Chongqing: Chongqing Jiaotong University, 2013. (in Chinese).
    [46]
    WEN Hai-fang, WU Sheng-hua, BHUSAL S. Performance evaluation of asphalt mixes containing steel slag aggregate as a measure to resist studded tire wear[J]. Journal of Materials in Civil Engineering, 2016, 28(5): 1-7.
    [47]
    YANG Jun-lin, LUO Rong, FAN Xiang-yang, et al. Research on design and road performance of asphalt mixture with porous steel slag[J]. Journal of Wuhan University of Technology (Transportation Science and Engineering), 2018, 42(1): 68-71. (in Chinese). doi: 10.3963/j.issn.2095-3844.2018.01.015
    [48]
    ZHOU Qi-wei. Study on the steel slag base and the performance of steel slag-asphalt mixtures in highway[D]. Chongqing: Chongqing Jiaotong University, 2011. (in Chinese).
    [49]
    WU Qi-fan, BAO Yan-ping, LIN Lu, et al. Study on phase compositions and microstructure of slag in different processes[J]. Industrial Safety and Environmental Protection, 2015, 41(8): 86-89. (in Chinese). doi: 10.3969/j.issn.1001-425X.2015.08.024
    [50]
    GAO Zhen-xin, SHEN Ai-qin, ZHAI Chao-wei, et al. Determination of volumetric parameters and impacting mechanism of water stability for steel slag asphalt mixture[J]. Journal of Traffic and Transporting Engineering, 2018, 18(2): 1-10. (in Chinese). doi: 10.3969/j.issn.1671-1637.2018.02.001
    [51]
    CHEN Feng, WU Shao-peng, CHEN Mei-zhu, et al. Manufacture and application of steel slag asphalt concrete[J]. Road Machinery and Construction Mechanization, 2010, 27(9): 19-23. (in Chinese). doi: 10.3969/j.issn.1000-033X.2010.09.011
    [52]
    XIANG Xiao-dong, XI Jia-chen, LI Can-hua. Mixture radio and performance of mixture of steel slag with AC-10C-type modified asphalt[J]. Journal of Lanzhou University of Technology, 2016, 42(6): 142-146. (in Chinese). doi: 10.3969/j.issn.1673-5196.2016.06.027
    [53]
    LI Can-hua, LIU Si, CHEN Lin. Study on application of WISCO steel slag as AC-10I fine-grained asphalt concrete aggregates[J]. WISCO Technology, 2011, 49(3): 34-36. (in Chinese). https://www.cnki.com.cn/Article/CJFDTOTAL-WGJS201103015.htm
    [54]
    XIE Yong, ZHANG Yi-sheng, XIN Shun-chao. Research on performance of asphalt mixtures for pavement with steel slag aggregates[J]. Highway, 2014(12): 186-190. (in Chinese). https://www.cnki.com.cn/Article/CJFDTOTAL-GLGL201412044.htm
    [55]
    YUAN Jun, QIAN Ye. Morphological character of coarse aggregate and its influence on high-temperature shear strength of asphalt mixture[J]. Journal of Traffic and Transportation Engineering, 2011, 11(4): 17-22. (in Chinese). http://transport.chd.edu.cn/article/id/201104003
    [56]
    TUO Jun-wei. Study on pavement performance of steel slag and gravel asphalt mixture[D]. Chongqing: Chongqing Jiaotong University, 2012. (in Chinese).
    [57]
    QI Guang-he. Application of steel slag asphalt mixture in Urumqi municipal road engineering[J]. Journal of Highway and Transportation Research and Development, 2014, 31(3): 122-124. (in Chinese). https://www.cnki.com.cn/Article/CJFDTOTAL-GLJJ201403038.htm
    [58]
    PASETTO M, BALDO N. Fatigue performance and stiffness properties of stone mastic asphalts with steel slag and coal ash[J]. Asphalt Pavements, 2014, 1: 881-889.
    [59]
    LI Yong-sheng, SHI Xiao-min, YANG Li-ying, et al. Study on application of steel slag asphalt mixture in asphalt surface layer[J]. Journal of Highway and Transportation Research and Development, 2012, 29(4): 70-72. (in Chinese). https://www.cnki.com.cn/Article/CJFDTOTAL-GLJJ201204022.htm
    [60]
    QIN Ren-jie, SUN Chao, SUN Ming, et al. Study on application of steel slag in SMA-13 asphalt mixture[J]. Journal of China and Foreign Highway, 2015, 35(1): 272-274. (in Chinese). doi: 10.3969/j.issn.1671-2579.2015.01.060
    [61]
    XIANG Xiao-dong, ZHOU Xi-ying, LI Can-hua, et al. Design and performance of OGFC-13 steel slag asphalt mixture[J]. Journal of Wuhan University of Science and Technology, 2013, 36(6): 424-427. (in Chinese). doi: 10.3969/j.issn.1674-3644.2013.06.006
    [62]
    PASETTO M, BALIELLO A, GIACOMELLO G, et al. Rheological characterization of warm-modified asphalt mastics containing electric arc furnace steel slags[J]. Advances in Materials Science and Engineering, 2016, 3: 1-11.
    [63]
    SKAF M, MANSO J M, ARAGON A, et al. EAF slag in asphalt mixes: a brief review of its possible re-use[J]. Resources, Conservation and Recycling, 2017, 120: 176-185. doi: 10.1016/j.resconrec.2016.12.009
    [64]
    ARABANI M, AZARBOOSH A R. The effect of recycled concrete aggregate and steel slag on the dynamic properties of asphalt mixtures[J]. Construction and Building Materials, 2012, 35: 1-7. doi: 10.1016/j.conbuildmat.2012.02.036
    [65]
    YANG Yong-li, WU Jian-ming, ZHANG Jian-qiang. Research on mix design and pavement performance of SMA-13 asphalt mixture with steel slag[J]. Road Machinery and Construction Mechanization, 2016, 33(7): 36-40. (in Chinese). doi: 10.3969/j.issn.1000-033X.2016.07.022
    [66]
    DING Qing-jun, LI Chun, PENG Bo, et al. Study of the practicability of asphalt concrete confected by steel slag[J]. Journal of Wuhan University of Technology, 2001, 23(6): 9-13. (in Chinese). doi: 10.3321/j.issn:1671-4431.2001.06.003
    [67]
    LU Fa-liang, LI Jin. Study on road performance of Jigang steel slag asphalt mixture[J]. Journal of China and Foreign Highway, 2013, 33(4): 259-263. (in Chinese). doi: 10.3969/j.issn.1671-2579.2013.04.064
    [68]
    XUE Yong-jie. Study on the preparation and performance of steel slag mastic asphalt mixture[D]. Wuhan: Wuhan University of Technology, 2005. (in Chinese).
    [69]
    HU Jin-long, SUN Da-quan. Application research of steel slag in asphalt concrete[J]. East China Highway, 2014(6): 54-57. (in Chinese). https://www.cnki.com.cn/Article/CJFDTOTAL-GDJC201803032.htm
    [70]
    CHEN J S, WEI S H. Engineering properties and performance of asphalt mixtures incorporating steel slag[J]. Construction and Building Materials, 2016, 128: 148-153. doi: 10.1016/j.conbuildmat.2016.10.027
    [71]
    SENGOZ B, AGAR E. Effect of asphalt film thickness on the moisture sensitivity characteristics of hot-mix asphalt[J]. Building and Environment, 2007, 42(10): 3621-3628. doi: 10.1016/j.buildenv.2006.10.006
    [72]
    LI Xin-jun, WILLIAMS R C, MARASTEANU M O, et al. Investigation of in-place asphalt film thickness and performance of hot-mix asphalt mixtures[J]. Journal of Materials in Civil Engineering, 2009, 21(6): 262-270. doi: 10.1061/(ASCE)0899-1561(2009)21:6(262)
    [73]
    WU Shao-peng, XUE Yong-jie, YE Qun-shan, et al. Utilization of steel slag as aggregates for stone mastic asphalt(SMA) mixtures[J]. Building and Environment, 2007, 42(7): 2580-2585. doi: 10.1016/j.buildenv.2006.06.008
    [74]
    GOLI H, HESAMI S, AMERI M. Laboratory evaluation of damage behavior of warm mix asphalt containing steel slag aggregates[J]. Journal of Materials in Civil Engineering, 2017, 29(6): 1-9.
    [75]
    ELLIS K. Mechanical, environmental and economic feasibility analysis of sodium carbonate activated blast furnace slag[D]. Washington DC: Kate Gleason College of Engineering, 2015.
    [76]
    TIWARI M K, BAJPAI S, DEWANGAN U K. Steel slag utilization—overview in Indian perspective[J]. International Journal of Advanced Research, 2016, 4(8): 2232-2246. doi: 10.21474/IJAR01/1442
    [77]
    SHEN Ai-qin, YU Mu-yang, GUO Yin-chuan, et al. Fatigue properties and improvement mechanism of steel slag asphalt mixture[J]. Journal of Building Materials, 2018, 21(2): 327-334. (in Chinese). doi: 10.3969/j.issn.1007-9629.2018.02.025
    [78]
    LI Ting, YANG Gang, CHEN Hua, et al. Basic properties and utilization of steel slags produced in different processes and prepared by different treatment process[J]. Bulletin of the Chinese Ceramic Society, 2015, 34(9): 2619-2623. (in Chinese). https://www.cnki.com.cn/Article/CJFDTOTAL-GSYT201509044.htm
    [79]
    TEIXEIRA J E S L, SCHUMACHER A G, PIRES P M, et al. Expansion level of steel slag aggregate effects on both material properties and asphalt mixture performance[J]. Transportation Research Record, 2019(2673): 506-515.
    [80]
    YAO Yun-shi, CHEN Tuan-jie, XIANG Hao, et al. Experiment of active deicing and snow melting pavement coating with environmental friendly and long-term action[J]. Journal of Traffic and Transportation Engineering, 2013, 13(4): 8-15. (in Chinese). doi: 10.3969/j.issn.1671-1637.2013.04.002
    [81]
    KEHAGIA F. Skid resistance performance of asphalt weearing course with electric arc furnace slag aggregates[J]. Waste Management and Research, 2009, 27(3): 288-294. doi: 10.1177/0734242X08092025
    [82]
    KAROL J K, REBECCA S, MCDANIEL J O. Development of a laboratory procedure to evaluate the influence type and mixture proportions on the frictional characteristics of flexible pavements[J]. Asphalt Paving Technology, 2008, 77: 35-69.
    [83]
    ALINEZHAD M, SAHAF A. Investigation of the fatigue characteristics of warm stone matrix asphalt (WSMA) containing electric arc furnace (EAF) steel slag as coarse aggregate and sasobit as warm mix additive[J]. Case Studies in Construction Materials, 2019, 11: 1-11.
    [84]
    AHMEDZADE P, SENGOZ B. Evaluation of steel slag coarse aggregate in hot mix asphalt concrete[J]. Journal of Hazardous Materials, 2009, 165: 300-305. doi: 10.1016/j.jhazmat.2008.09.105
    [85]
    CHEN Feng, WU Shao-peng, ZHANG Yuan. Research on electrical properties of conductive asphalt concrete made of steel slag[J]. Road Machinery and Construction Mechanization, 2010, 27(11): 51-54, 74. (in Chinese). doi: 10.3969/j.issn.1000-033X.2010.11.024
    [86]
    AO Zao-xin. Research on steel slag and graphite conductivity asphalt concrete[D]. Wuhan: Wuhan University of Technology, 2009. (in Chinese).
    [87]
    ZHOU Chao-gang, AI Li-qun, LYU Yan, et al. The influence of temperature characteristic of steel slag for microwave heating[J]. Journal of Hebei Polytechnic University (Natural Science Edition), 2011, 33(3): 25-30. (in Chinese). https://www.cnki.com.cn/Article/CJFDTOTAL-HBLG201103008.htm
    [88]
    GAO Jie, SHA Ai-min, WANG Zhen-jun, et al. Utilization of steel slag as aggregate in asphalt mixtures for microwave deicing[J]. Journal of Cleaner Production, 2017, 152: 429-442. doi: 10.1016/j.jclepro.2017.03.113
    [89]
    PASETTO M, BALDO N. Mix design and performance analysis of asphalt concretes with electric arc furnace slag[J]. Construction and Building Materials, 2011, 25(8): 3458-3468. doi: 10.1016/j.conbuildmat.2011.03.037
    [90]
    CHEN S H, PRAMESTHI T W, PARAMITHA P A, et al. Environmental impact assessment and total cost analysis of BOF and BSSF slag in asphalt concrete[J]. Journal of Performance of Constructed Facilities, 2017, 31(4): 1-5.
    [91]
    FERREIRA V J, VILAPLANA A S D G, GARCIÍA-ARMINGOL T, et al. Evaluation of the steel slag incorporation as coarse aggregate for road construction: technical requirements and environmental impact assessment[J]. Journal of Cleaner Production, 2016, 130: 175-186. doi: 10.1016/j.jclepro.2015.08.094
    [92]
    TAM M P, DAEW P, TRI H M L. Crack healing performance of hot mix asphalt containing steel slagby microwaves heating[J]. Construction and Building Materials, 2018, 180: 503-511. doi: 10.1016/j.conbuildmat.2018.05.278
    [93]
    SUN Yi-han, WU Shao-peng, LIU Quan-tao, et al. Self-healing performance of asphalt mixtures through heating fibers or aggregate[J]. Construction and Building Materials, 2017, 150: 673-680. doi: 10.1016/j.conbuildmat.2017.06.007
    [94]
    HE Liang, LI Guan-nan, XIONG Han-jiang, et al. Induction heating activated self-healing of cracks in SBS modified asphalt concrete adding steel grits[J]. Journal of Traffic and Transportation Engineering, 2018, 18(3): 11-18. (in Chinese). doi: 10.3969/j.issn.1671-1637.2018.03.003
    [95]
    LI Bao-an, LI Chen. Economic benefit analysis of steel slag asphalt mixture based on life cycle[J]. Journal of Highway and Transportation Research and Development, 2017, 34(7): 4-7. (in Chinese). https://www.cnki.com.cn/Article/CJFDTOTAL-GLJJ201707003.htm
    [96]
    SUER P, LINDQVIST J E, ARM M, et al. Reproducing ten years of road ageing—accelerated carbonation and leaching of EAF steel slag[J]. Science of Total Environment, 2009, 407: 5110-5118. doi: 10.1016/j.scitotenv.2009.05.039
    [97]
    STROUP-GARDINER M, WATTENBERG-KOMAS T. Recycled materials and byproducts in highway applications summary report[R]. Washington DC: Transportation Research Board, 2013.
    [98]
    XIE Jun, WU Shao-peng, ZHANG Lin-li, et al. Evaluation the deleterious potential and heating characteristics of basic oxygen furnace slag based on laboratory and in-place investigation during large-scale reutilization[J]. Journal of Cleaner Production, 2016, 133: 78-87. doi: 10.1016/j.jclepro.2016.05.106
    [99]
    NASCIMENTO L P D, OLIVEIRA J R M, VILARINHO C. Use of industrial waste as a substitute for conventional aggregates in asphalt pavements: a review[J]. Lecture Notes in Electrical Engineering, 2019, 505: 690-696.
    [100]
    HUNT L, BOYLE G E. Steel slag in hot mix asphalt concrete[R]. Salem: Oregon Department of Transportation, 2000.
    [101]
    OLUWASOLA E A, HAININ M R, AZIZ M M A. Comparative evaluation of dense-graded and gap-graded asphalt mix incorporating electric arc furnace steel slag and copper mine tailings[J]. Journal of Cleaner Production, 2016, 122: 315-325. doi: 10.1016/j.jclepro.2016.02.051
    • Relative Articles
    • Supplements(0)
    • Cited By

Catalog

    Get Citation
    PDF
    XML

    Article Metrics

    Article views (7350) PDF downloads(1215) Cited by()
    Related

    Website copyright Journal of Traffic and Transportation Engineering Editorial Department陕ICP备05001904号-1

    Address ：Editorial Department of Journal of Traffic and Transportation Engineering, Chang'an University, Middle Section of South 2nd Ring Road, Xi'an, China（710064） Tel：029-82334388 Email：jygc@chd.edu.cn

    All visit:Today's visit:

    Supported by: Beijing Renhe Information Technology Co. Ltd    

    /

    DownLoad:  Full-Size Img  PowerPoint
    Return
    Return