Citation: | JIANG Yang-sheng, HU Lu, LU Guo. Determined method of subway footway width based on queuing theory[J]. Journal of Traffic and Transportation Engineering, 2010, 10(3): 67-71. doi: 10.19818/j.cnki.1671-1637.2010.03.012 |
[1] |
GB50157—2003, code for design of metro[S]. (in Chinese)
|
[2] |
FRUIN J J. Pedestrian planning and design[C]//American Institute of Architects. Metropolitan Association of Urban Designers and Environmental Planners. New York: ASCE, 1971: 4-6.
|
[3] |
TRB. Transit capacity and quality of service manual[R]. Washington DC: TRB, 2003.
|
[4] |
WEN Ya, YAN Ke-fei, YU Chao-wei. Level of service standards for pedestrian facilities in Shanghai metro stations[C]//ASCE. International Conference on Transportation Engineering 2007. Reston: ASCE, 2007: 578-583.
|
[5] |
TAN Fang-tong. The calculation method of the area per customer of the store business hall[J]. Huazhong Architecture, 2006, 24 (10): 100-101. (in Chinese) https://www.cnki.com.cn/Article/CJFDTOTAL-HZJZ200610031.htm
|
[6] |
GB/T10000—1988, body size of Chinese adults[S]. (in Chinese)
|
[7] |
GONG Xiao-lan, WEI Zhong-hua. Research on distribution model of pedestrian traffic[J]. Journal of Beijing University of Technology, 2009, 35 (4): 493-497. (in Chinese) https://www.cnki.com.cn/Article/CJFDTOTAL-BJGD200904014.htm
|
[8] |
XING Xiao-yu, WANG Yong-xue. The integral of the queue length process in a G/G/1 model[J]. Acta Scientiarum Naturalium Universitatis Nankaiensis, 2010, 43 (1): 5-10. (in Chinese) https://www.cnki.com.cn/Article/CJFDTOTAL-NKDZ201001004.htm
|
[9] |
ZHANG Hui-jian, QIU Wen-ge, GAO Yang. Optimization of cross-section design of four-track railway tunnel with MATLAB toolbox[J]. Subgrade Engineering, 2010 (1): 47-49. (in Chinese) https://www.cnki.com.cn/Article/CJFDTOTAL-LJGC201001020.htm
|
[10] |
KE Ting. The modeling and simulation of queuing system GI/GI/c/K/∞ based on MATLAB[J]. Transactions of Shenyang Ligong University, 2007, 26 (1): 87-90. (in Chinese) https://www.cnki.com.cn/Article/CJFDTOTAL-SGXY200701023.htm
|