Volume 11 Issue 4
. 
Turn off MathJax
Article Contents
Article Navigation >  Journal of Traffic and Transportation Engineering  > 2011  >  11(4): 114-122
GOU Chen-xi, CAI Bo-gen, TANG Tao, SHANGGUAN Wei. Test case generation method of radio block center[J]. Journal of Traffic and Transportation Engineering, 2011, 11(4): 114-122. doi: 10.19818/j.cnki.1671-1637.2011.04.018
Citation: GOU Chen-xi, CAI Bo-gen, TANG Tao, SHANGGUAN Wei. Test case generation method of radio block center[J]. Journal of Traffic and Transportation Engineering, 2011, 11(4): 114-122. doi: 10.19818/j.cnki.1671-1637.2011.04.018
shu

Test case generation method of radio block center

doi: 10.19818/j.cnki.1671-1637.2011.04.018
  • 1.

    School of Electronic and Information Engineering, Beijing Jiaotong University, Beijing 100044, China

  • 2.

    State Key Laboratory of Rail Traffic Control and Safety, Beijing Jiaotong University, Beijing 100044, China

More Information
  • Author Bio:

    GOU Chen-xi(1987-), female, doctoral student, +86-10-51687111, gouchenxi@gmail.com

    TANG Tao(1963-), male, professor, PhD, +86-10-51684228, ttang@bjtu.edu.cn

  • Received Date: 2011-03-20
  • Publish Date: 2011-08-25
    Abstract
  • Test case generation method based on function features was used, the function structure of radio block center (RBC) was studied, the function features of RBC were extracted, and the feature list of RBC was obtained. Aiming at the each feature of RBC, test cases were compiled and serially combined to electronic test sequence. On the basis of standards and requirements of running control system for China high-speed train, RBC test platform was established, and test step and XML program document was written. With RBC test platform, the three test sequences of five running features containing registration and start-up, driving permission, parking and cancellation, communication network fault and RBC switching. Test result shows that under room temperature and atmospheric pressure, while there is only one train and its speed is less than 350 km·h-1, the uninterrupted working time of RBC is more than 90 min, and the function can be kept well. So, the proposed method is effective.

     

    • FullText(HTML)
  • loading
    • References(18)
  • [1]
    季学胜, 李开成, 张勇, 等. CTCS-3级列控系统测试案例生成方法的研究[J]. 铁道通信信号, 2009, 45 (10): 1-5. https://www.cnki.com.cn/Article/CJFDTOTAL-TDTH200910001.htm

    JI Xue-sheng, LI Kai-cheng, ZHANG Yong, et al. Research on test case generation method of CTCS-3 train control system[J]. Railway Signalling and Communication, 2009, 45 (10): 1-5. (in Chinese) https://www.cnki.com.cn/Article/CJFDTOTAL-TDTH200910001.htm
    [2]
    张新明, 禹志阳, 袁焕靖. 基于运营场景的CTCS-3级列控系统功能需求分析[J]. 铁道通信信号, 2010, 46 (4): 17-21. https://www.cnki.com.cn/Article/CJFDTOTAL-TDTH201004005.htm

    ZHANG Xin-ming, YU Zhi-yang, YUAN Huan-jing. CTCS-3 train control systemfunction requirements analysis based on operational scenarios[J]. Railway Signalling and Communication, 2010, 46 (4): 17-21. (in Chinese) https://www.cnki.com.cn/Article/CJFDTOTAL-TDTH201004005.htm
    [3]
    HEI MDAHL M P E, RAYADURGAM S, VISSER W. Specification centered testing[C]//TRACEY N, PENIX J, VISSER W. The Second International Workshop on Automated Program Analysis, Testing and Verification. Toronto: ICSE, 2001: 1-5.
    [4]
    TOMMASO P D, FLAMMI NI F, LAZZARO A, et al. The simulation of anomalies in the functional testing of the ERTMS/ETCS trackside system[C]//IEEE. Proceedings of the Ninth IEEE International Symposiumon High-Assurance Systems Engineering. Heidelberg: IEEE, 2005: 131-139.
    [5]
    TILIERE G D, LAPERROUZA M. Developing and deploying innovative technologies in a liberalized European railway system[C]//STRC. Proceedings of 9th Swiss Transport Research Conference. Monte Verita: STRC, 2009: 1-22.
    [6]
    NICOLA G D, TOMMASO P D, ESPOSITO R, et al. A hybrid testing methodology for railway control systems[C]//MARITTA H, PETER L, STEFAN W. Computer Safety, Reliability, and Security. Potsdam: Springer Berlin/Heidelberg, 2004: 116-129.
    [7]
    ERTMS/ETCS SUBSET076-3, methodology of testing[S].
    [8]
    ERTMS/ETCS SUBSET 076-2, methodology to prepare features[S].
    [9]
    ERTMS/ETCS SUBSET 076-4-1, test sequence generation: methodology and rules[S].
    [10]
    ERTMS/ETCS SUBSET076-5-1, ERTMS ETCSclass 1 feature list[S].
    [11]
    禹志阳, 赵阳. 基于黑盒测试技术的CTCS-3级列控系统联调联试研究[J]. 铁道通信信号, 2010, 46 (5): 1-5. https://www.cnki.com.cn/Article/CJFDTOTAL-TDTH201005000.htm

    YU Zhi-yang, ZHAO Yang. Study on CTCS-3 train control systemdynamic test based on black-boxtest[J]. Rail way Signalling and Communication, 2010, 46 (5): 1-5. (in Chinese) https://www.cnki.com.cn/Article/CJFDTOTAL-TDTH201005000.htm
    [12]
    李伟, 王海峰. CTCS-3级列控系统车载设备测试序列的优化[J]. 北京交通大学学报, 2010, 34 (2): 75-78. https://www.cnki.com.cn/Article/CJFDTOTAL-BFJT201002019.htm

    LI Wei, WANG Hai-feng. Optimization test sequence of CTCS-3 on-board equipment[J]. Journal of Beijing Jiaotong University, 2010, 34 (2): 75-78. (in Chinese) https://www.cnki.com.cn/Article/CJFDTOTAL-BFJT201002019.htm
    [13]
    ZHANG Yan, ZHU Li, CHEN Li-jie, et al. A method for simulation and analysis of trackside data communication systemin CBTC[C]//IEEE. 2009 WRI International Conference on Communications and Mobile Computing. Kunming: IEEE, 2009: 529-533.
    [14]
    曾洁毅, 赵会兵. 应答器传输模块测试系统的研究[J]. 北京交通大学学报, 2008, 32 (2): 80-83. https://www.cnki.com.cn/Article/CJFDTOTAL-BFJT200802019.htm

    ZENG Jie-yi, ZHAO Hui-bing. Research on balise transmission module test system[J]. Journal of Beijing Jiaotong University, 2008, 32 (2): 80-83. (in Chinese) https://www.cnki.com.cn/Article/CJFDTOTAL-BFJT200802019.htm
    [15]
    DONG Hai-rong, NING Bin, CAI Bai-gen, et al. Automatic train control system development and simulation for highspeed railways[J]. IEEE Circuits and Systems Magazine, 2010, 10 (2): 6-18.
    [16]
    牛儒, 曹源, 唐涛. ETCS-2级列控系统RBC交接协议的形式化分析[J]. 铁道学报, 2009, 31 (4): 52-58. https://www.cnki.com.cn/Article/CJFDTOTAL-TDXB200904012.htm

    NIU Ru, CAO Yuan, TANG Tao. Formal modelling and analysis of RBC handover protocol for ETCS level 2 using stochastic petri nets[J]. Journal of the China Railway Society, 2009, 31 (4): 52-58. (in Chinese) https://www.cnki.com.cn/Article/CJFDTOTAL-TDXB200904012.htm
    [17]
    梁楠, 王海峰. 基于SPN的CTCS-3级列控系统RBC实时性能分析[J]. 铁道学报, 2011, 33 (2): 67-71. https://www.cnki.com.cn/Article/CJFDTOTAL-TDXB201102017.htm

    LIANG Nan, WANG Hai-feng. Real-time performance analysis of RBC system for CTCS lever 3 using stochastic petri networks[J]. Journal of the China Railway Society, 2011, 33 (2): 67-71. (in Chinese) https://www.cnki.com.cn/Article/CJFDTOTAL-TDXB201102017.htm
    [18]
    吕继东, 唐涛, 贾昊. 客运专线CTCS-3级列控系统无线闭塞中心的建模与验证[J]. 铁道学报, 2010, 32 (6): 34-42. https://www.cnki.com.cn/Article/CJFDTOTAL-TDXB201006009.htm

    LUJi-dong, TANG Tao, JIA Hao. Modeling and verification of Radio Block Center of CTCS-3 train control system for dedicated passengers lines[J]. Journal of the China Railway Society, 2010, 32 (6): 34-42. (in Chinese) https://www.cnki.com.cn/Article/CJFDTOTAL-TDXB201006009.htm
    • Relative Articles
    • Supplements(0)
    • Cited By
  • 加载中

Catalog

    通讯作者: 陈斌, bchen63@163.com
    • 1. 

      沈阳化工大学材料科学与工程学院 沈阳 110142

    1. 本站搜索
    2. 百度学术搜索
    3. 万方数据库搜索
    4. CNKI搜索
    Get Citation
    PDF
    XML

    Article Metrics

    Article views (917) PDF downloads(600) Cited by()
    Proportional views
    Related

    Copyright《Journal of Traffic and Transportation Engineering》编辑部陕ICP备05001904号-1

    Address ：Editorial Department of Journal of Traffic and Transportation Engineering, Chang 'an University, Middle Section of South Second Ring Road, Xi 'an, Shaanxi（710064） Tel：029-82334388 Email：jygc@chd.edu.cn

    All visit:Today's visit:

    Supported by: Beijing Renhe Information Technology Co. Ltd    

    /

    DownLoad:  Full-Size Img  PowerPoint
    Return
    Return