Volume 13 Issue 3
. 
Turn off MathJax
Article Contents
Article Navigation >  Journal of Traffic and Transportation Engineering  > 2013  >  13(3): 9-14
KIM Yongjoo, CHO Dongwoo, YANG Sunglin, KIM Yeongmin, KWON Sooahn, HWANG Sungdo. Evaluation of plant-produced porous warm-mix asphalt mixture using LEADCAP additive[J]. Journal of Traffic and Transportation Engineering, 2013, 13(3): 9-14. doi: 10.19818/j.cnki.1671-1637.2013.03.002
Citation: KIM Yongjoo, CHO Dongwoo, YANG Sunglin, KIM Yeongmin, KWON Sooahn, HWANG Sungdo. Evaluation of plant-produced porous warm-mix asphalt mixture using LEADCAP additive[J]. Journal of Traffic and Transportation Engineering, 2013, 13(3): 9-14. doi: 10.19818/j.cnki.1671-1637.2013.03.002
shu

Evaluation of plant-produced porous warm-mix asphalt mixture using LEADCAP additive

doi: 10.19818/j.cnki.1671-1637.2013.03.002

  • Korea Institute of Construction Technology, Goyang-Si 411-712, Gyeonggi-Do, Korea

Funds:  Strategic Rescarch Project(Development of Low-Carbon and Low-Cost Asphalt Pavements) Funded by Korca Institute ofConstruction Tcchnology
More Information
  • Author Bio:

    KIM Yongjoo, Male, Senior Researcher of Korea Institutce of Construction Technology, PhD, yongjook@kict.re.kr

  • Received Date: 2013-01-12
  • Publish Date: 2013-06-25
    Abstract
  • Warm-mix asphalt(WMA) technology was applied for asphalt mixture, plant-produced porous WMA using LEADCAP additive(porous WMA-LEADCAP) test section was built and compacted at 30℃ lower than porous hot-mix asphalt(porous HMA) test section.Marshall mix designs were conducted for porous WMA-LEADCAP mixture and porous HMA mixture in terms of Marshall stability, Cantabro loss and dynamic stability. The workability, compactablity and surface quality of porous WMA-LEADCAP pavement were investigated, and the engineering properties of plant-produced porous WMA-LEADCAP mixture and plant-produced porous HMA mixture were evaluated based on indirect tensile strength test and dynamic immersion test. Analysis result shows that LEADCAP additive does not affect polymermodified asphalt in terms of penetration, softening point, viscosity, ductility, toughness and tenacity. Porous WMA-LEADCAP pavement has similar field density, permeability and smoothness compared with standard porous HMA pavement. Plant-produced porous WMA-LEADCAP mixture is equivalent to plantproduced porous HMA mixture in indirect tensile strength, toughness and stripping resistance.

     

    • FullText(HTML)
  • loading
    • References(9)
  • [1]
    YOKOYAMA N, NAKAJIMA H, MURAKAMI H. The field study of the conformed porous HMA at heavy snow region[C]//ISAP. Proceedings of the 11th International Conference on Asphalt Pavements. Nagoya: ISAP, 2010: 254-263.
    [2]
    DANGELO J, HARM E, BARTOSZEK J, et al. Warm-mix asphalt: European practice[R]. Alexandria: FHWA, 2008.
    [3]
    KIM Y, HWANG S, KWON S, et al. Laboratory and field experiences of low energy and low carbon-dioxide asphalt pavement in Korea[C]//ASCE. GeoHunan International Conference. Changsha: ASCE, 2011: 131-138.
    [4]
    KIM Y, YANG S, CHO D, et al. Evaluation of moisture susceptibility and stripping resistance for warm-mix asphalt mixtures containing adhesion promoter[C]//Chulalongkorn University. 7th International Conference on Road & amp; amp; Airfield Pavement Technology. Bangkok: Chulalongkorn University, 2011: 1-6.
    [5]
    LEE J, KIM Y, CHO D, et al. Evaluation of moisture susceptibility of warm-mix asphalt with MMLS[C]//World Road Association. XXIV World Road Congress. Mexico City: World Road Association, 2011: 1-6.
    [6]
    KIM Y, LEE J, CHO D, et al. Building sustainable pavements with wax-based compound using a warm-mix asphalt technology in Korea[C]//EASTS. Eastern Asia Society for Transportation Studies(EASTS)Conference. Jeju: EASTS, 2011: 1-11.
    [7]
    OLIVEIRA J, SILVA H, FONSECA P, et al. Laboratory and field study of a WMA mixture produced with a new temperature reduction additive[C]//FHWA. 2nd International Conference on Warm Mix Asphalt. Saint Louis: FHWA, 2011: 6-12.
    [8]
    ASTM D4123-82, standard test method for indirect tension test for resilient modulus of bituminous mixtures[S].
    [9]
    BS EN 12697-11: 2003, bituminous mixtures—test methods for hot mix asphalt—part 11 determination of the affinity between aggregate and bitumen[S].
    • Relative Articles
    • Supplements(0)
    • Cited By
  • 加载中

Catalog

    通讯作者: 陈斌, bchen63@163.com
    • 1. 

      沈阳化工大学材料科学与工程学院 沈阳 110142

    1. 本站搜索
    2. 百度学术搜索
    3. 万方数据库搜索
    4. CNKI搜索
    Get Citation
    PDF
    XML

    Article Metrics

    Article views (610) PDF downloads(626) Cited by()
    Proportional views
    Related

    Copyright《Journal of Traffic and Transportation Engineering》编辑部陕ICP备05001904号-1

    Address ：Editorial Department of Journal of Traffic and Transportation Engineering, Chang 'an University, Middle Section of South Second Ring Road, Xi 'an, Shaanxi（710064） Tel：029-82334388 Email：jygc@chd.edu.cn

    All visit:Today's visit:

    Supported by: Beijing Renhe Information Technology Co. Ltd    

    /

    DownLoad:  Full-Size Img  PowerPoint
    Return
    Return