YANG Rong-shan, WANG Jie, JIANG Heng-chang, CHEN Shuai, DU Jin-xin. Effects of post-pouring belt void of base slab on track structure and train operation of CRTSⅡ slab track[J]. Journal of Traffic and Transportation Engineering, 2019, 19(3): 71-78. doi: 10.19818/j.cnki.1671-1637.2019.03.008
Citation: YANG Rong-shan, WANG Jie, JIANG Heng-chang, CHEN Shuai, DU Jin-xin. Effects of post-pouring belt void of base slab on track structure and train operation of CRTSⅡ slab track[J]. Journal of Traffic and Transportation Engineering, 2019, 19(3): 71-78. doi: 10.19818/j.cnki.1671-1637.2019.03.008

Effects of post-pouring belt void of base slab on track structure and train operation of CRTSⅡ slab track

doi: 10.19818/j.cnki.1671-1637.2019.03.008
More Information
  • Author Bio:

    YANG Rong-shan(1975-), male, professor, PhD, swjtu-yrs@qq.com

  • Received Date: 2019-01-19
  • Publish Date: 2019-06-25
  • Under the uninterrupted train running condition, the post-pouring belt of CRTSⅡ slab track base slab on the bridge was repaired by using the ultra-high pressure water jet method. The statics calculation model of CRTSⅡ slab track structure was established, and the effects of post-pouring belt with different void length on the vertical displacements of rail and track slab and the tensile stress of track slab were analyzed. The vehicle-track coupling dynamics calculation model was established, and the influences of normal running on track structure, running safety and comfort were analyzed when the complete void length of the post-pouring belt of base slab was 1.0 m. Calculation result shows that under the action of 1.5 times static wheel load, the vertical displacements of rail and track slab increase with the increase of the void length of post-pouring belt. When the complete void length of post-pouring belt is 1.0 m, the vertical displacements of rail and track slab both increase by 0.03 mm, so the complete void has less effect on vertical displacements. When the void length of post-pouring belt is 0.7, 0.8, 0.9 and 1.0 m, respectively, the maximum tensile stress of track slab is 0.96, 1.12, 1.18 and 1.22 MPa, respectively. When the post-pouring belt completely voids, the maximum tensile stress is less than the designed tensile strength of 1.96 MPa, and the track slab will not crack. When the train speed is 300 km·h-1 and the complete void length of post-pouring belt is 1.0 m, the maximum vertical displacements of rail and track slab are 0.91 and 0.32 mm, and less than the reference values of 1.5 and 0.4 mm in Technical Regulations for Dynamic Acceptance for High-Speed Railways Construction (TB 10761—2013), which shows that the normal running after post-pouring belt voids can not cause great influence on the track structure. When the complete void of post-pouring belt occures, the vertical acceleration of track slab is about 3 times of the value under the normal condition, which indicates that normal running will increase the vibration intensity of the lower foundation. The statics and dynamics analysis results show that using the ultra-high pressure water jet method to repair the post-pouring belt of base slab can allow the train travel at normal speeds.

     

  • loading
  • [1]
    HE Hua-wu. Science and technology innovations on Beijing-Tianjin Inter-City Railway[J]. Railway Construction Technology, 2009 (2): 1-12. (in Chinese). doi: 10.3969/j.issn.1009-4539.2009.02.002
    [2]
    ZHANG Peng-fei, GUI Hao, GAO Liang, et al. Analysis of influencing factors of braking force of CRTSⅡ slab track on bridge[J]. Journal of Railway Engineering Society, 2018 (7): 30-35, 108. (in Chinese). doi: 10.3969/j.issn.1006-2106.2018.07.006
    [3]
    WEI Qiang, ZHAO Guo-tang, CAI Xiao-pei. Study on anchor structure behind the abutment for slab track CRTSⅡ[J]. Journal of the China Railway Society, 2013, 35 (7): 90-95. (in Chinese). doi: 10.3969/j.issn.1001-8360.2013.07.015
    [4]
    JIANG Zi-qing, WANG Ji-jun, JIANG Cheng. Research of CRTSⅡ slab ballastless track damage on bridge[J]. Railway Engineering, 2014 (6): 117-121. (in Chinese). doi: 10.3969/j.issn.1003-1995.2014.06.35
    [5]
    DONG Wei, ZHOU Xiang-ming, WU Zhi-min. A fracture mechanics-based method for prediction of cracking of circular and elliptical concrete rings under restrained shrinkage[J]. Engineering Fracture Mechanics, 2014, 131: 687-701. doi: 10.1016/j.engfracmech.2014.10.015
    [6]
    ZHU Qian-kun. Interaction between simply supported beams and CRTSⅡslab ballastless track[D]. Changsha: Central South University, 2013. (in Chinese).
    [7]
    ZHENG Xian-qi. Construction technology of base board of CRTSⅡ slab ballastless track upon long bridge on Beijing-Shanghai High-Speed Railway[J]. Railway Standard Design, 2013 (2): 38-43. (in Chinese). https://www.cnki.com.cn/Article/CJFDTOTAL-TDBS201302012.htm
    [8]
    HOSSAIN A B, WEISS J. Assessing residual stress development and stress relaxation in restrained concrete ring specimens[J]. Cement and Concrete Composites, 2004, 26 (5): 531-540. doi: 10.1016/S0958-9465(03)00069-6
    [9]
    LIU Quan-qing. Key technology of CRTSⅡ slab ballastless track base plate construction[J]. Journal of Shijiazhuang Tiedao University (Natural Science), 2013, 26 (S): 229-232, 235. (in Chinese). https://www.cnki.com.cn/Article/CJFDTOTAL-SJZT2013S1073.htm
    [10]
    ZHANG Ya-shuang. Mechanic analysis for the concrete roadded of CRTSⅡ slab track during construction on the long bridge of simply supported beam[D]. Chengdu: Southwest Jiaotong University. (in Chinese).
    [11]
    ZHAO Ping-rui, HU Jia, LIU Guan. Optimization calculation of construction technology of CRTSⅡ slab track base plate on long bridge[J]. Railway Engineering, 2014 (6): 142-145. (in Chinese). doi: 10.3969/j.issn.1003-1995.2014.06.41
    [12]
    LIU Wei. Research on the influence and repairing effect of hydraulically bounded layer fracture of CRTSⅡ slab track[D]. Beijing: Beijing Jiaotong University, 2014. (in Chinese).
    [13]
    HUANG Chuan-yue. Repairing method of supporting layer inclined crack damage of CRTSⅡ slab ballastless track[J]. Railway Engineering, 2018, 58 (11): 139-141. (in Chinese). doi: 10.3969/j.issn.1003-1995.2018.11.31
    [14]
    WU Shao-li, WANG Xin, WU Zhi-qiang, et al. High-speed railway ballastless track structure disease type and rapid maintenance method[J]. Chinese Railways, 2013 (1): 42-44. (in Chinese). doi: 10.3969/j.issn.1001-683X.2013.01.009
    [15]
    JING Pu, LI Fei. Study on patching scheme of CRTSⅡ slab ballastless track diseases[J]. Railway Quality Control, 2017, 45 (11): 22-29. (in Chinese). doi: 10.3969/j.issn.1006-9178.2017.11.008
    [16]
    ZHAO Jing, SONG Ting. Fiber-reinforced rapid repair material for concrete pavement[J]. Advanced Materials Research, 2010, 168-170: 870-874. doi: 10.4028/www.scientific.net/AMR.168-170.870
    [17]
    WANG Li-yuan. Repair technologies for the base plate fracture of CRTSⅡ slab ballastless track in the operation of high-speed railway[J]. Railway Construction Technology, 2014 (7): 44-47, 74. (in Chinese). doi: 10.3969/j.issn.1009-4539.2014.07.011
    [18]
    LYU Jian-hua, YANG Ji-chao, JIA Jin-min, et al. High-speed railway CRTSⅡ ballastless track base plate repair technology[J]. Chinese Railways, 2014 (4): 77-80. (in Chinese). https://www.cnki.com.cn/Article/CJFDTOTAL-TLZG201404018.htm
    [19]
    CHAI Qiang. Research on maintenance techniques of CRTSⅡ slab ballastless track system on high speed railway[D]. Beijing: China Academy of Railway Sciences, 2014. (in Chinese).
    [20]
    ZHOU Ming-yan. Study on maintenance and repair technology of slab track of high speed railway in cold area[D]. Beijing: China Academy of Railway Sciences, 2017. (in Chinese).
    [21]
    BODNÁROVÁ L, SITEK L, HELA R, et al. New potential of highspeed water jet technology for renovating concrete structures[J]. Slovak Journal of Civil Engineering, 2011, 19 (2): 1-7. doi: 10.2478/v10189-011-0006-z
    [22]
    MOMBER A, LOUIS H. On the behaviour of concrete under water jet impingement[J]. Materials and Structures, 1994, 27 (167): 153-156.
    [23]
    WU Gang, SONG Jia-hui, HOU Ke-bang, et al. Application of high-pressure water jet in mine[J]. Advanced Materials Research, 2014, 1033/1034: 1323-1326. doi: 10.4028/www.scientific.net/AMR.1033-1034.1323
    [24]
    TIAN Chang-liu, CHENG Xue-li, WANG Wei. Experimental study on rock breaking with impacting water jet by modulation of chaos[J]. Advanced Materials Research, 2012, 535-537: 1751-1754.
    [25]
    HAM Y B, KWON S K, NOH J H, et al. Development of road stripe removing equipment using high-pressure water jet[J]. Automation in Construction, 2006, 15 (5): 578-588.
    [26]
    CHEN Hai-long, LI Zhao-min, GAO Zhi-han, et al. Numerical investigation of rock breaking mechanisms by high pressure water jet[J]. Procedia Engineering, 2015, 126: 295-299.
    [27]
    CHEN Jun. Research on artificial chiseling with high pressure water jet and repair materials of ultra-high performance concrete[D]. Changsha: Hunan University, 2015. (in Chinese).
    [28]
    ZHAI Wan-ming, WANG Kai-yun, CAI Cheng -biao. Fundamentals of vehicle-track coupled dynamics[J]. Vehicle System Dynamics, 2009, 47 (11): 1349-1376.
    [29]
    CAI Cheng-biao. Dynamics of ballastless track and its application[J]. Journal of Southwest Jiaotong University, 2007, 42 (3): 255-261. (in Chinese). https://www.cnki.com.cn/Article/CJFDTOTAL-XNJT200703000.htm
    [30]
    ZHU Sheng-yang. Damage behavior of high-speed railway ballastless track and its effect on structure dynamic performance[D]. Chengdu: Southwest Jiaotong University, 2015. (in Chinese).
    [31]
    REN Juan-juan, XU Jia-duo, TIAN Gen-yuan, et al. Field test and statistical characteristics of wheel-rail force for slab track with passenger and freight traffic[J]. Engineering Mechanics, 2018, 35 (2): 239-248. (in Chinese). https://www.cnki.com.cn/Article/CJFDTOTAL-GCLX201802029.htm

Catalog

    Article Metrics

    Article views (1028) PDF downloads(376) Cited by()
    Related

    /

    DownLoad:  Full-Size Img  PowerPoint
    Return
    Return