Review on key technologies of 400 km·h<sup>-1</sup> variable gauge EMUs bogies

HUANG Zhi-hui; HU Fei-fei; LI Guo-dong; ZHOU Dian-mai

doi:10.19818/j.cnki.1671-1637.2021.01.017

Volume 21 Issue 1

Aug. 2021

Turn off MathJax

Article Contents

Article Navigation > Journal of Traffic and Transportation Engineering > 2021 > 21(1): 358-368

HUANG Zhi-hui, HU Fei-fei, LI Guo-dong, ZHOU Dian-mai. Review on key technologies of 400 km·h-1 variable gauge EMUs bogies[J]. Journal of Traffic and Transportation Engineering, 2021, 21(1): 358-368. doi: 10.19818/j.cnki.1671-1637.2021.01.017

Citation:

HUANG Zhi-hui, HU Fei-fei, LI Guo-dong, ZHOU Dian-mai. Review on key technologies of 400 km·h^-1 variable gauge EMUs bogies[J]. Journal of Traffic and Transportation Engineering, 2021, 21(1): 358-368. doi: 10.19818/j.cnki.1671-1637.2021.01.017

Citation:

PDF( 11088 KB)

Review on key technologies of 400 km·h^-1 variable gauge EMUs bogies

doi: 10.19818/j.cnki.1671-1637.2021.01.017

1.
State Key Laboratory of Traction Power, Southwest Jiaotong University, Chengdu 610031, Sichuan, China
2.
National Engineering Technology and Research Center for System Integration of Railway Vehicle, CRRC Changchun Railway Vehicles Co., Ltd., Changchun 130062, Jilin, China

Funds:

National Natural Science Foundation of China U19A20109

National Key Research and Development Program of China 2016YFB1200501

More Information

Author Bio:
HUANG Zhi-hui(1966-), male, professor, PhD, hzh_95@163.com
Received Date: 2020-08-27
Publish Date: 2021-08-27

Abstract

Abstract

To address the problems in the development and design of 400 km·h^-1 variable gauge EMUs bogies in China, five important problems for Chinese high-speed variable gauge EMUs bogies (i.e., traction motor mounting, type of wheel set drive, axle box bearing, track changing mechanism, foundation brake, and sanding device) were studied based on the mature variable gauge bogie technologies developed in other countries. Corresponding solutions to the problems discovered in this study were also proposed. Research result shows that both the electric motor suspension and body suspension can make room for the installation of brake disc, but those will be relative displacements between the motor and the driven axles, which requires motion compensation measures. To meet the requirements of axle size and rotating speed of 400 km·h^-1 variable gauge EMUs, it is necessary to develop new axle box bearings. The existence of track changing mechanism will increase the unsprung mass of bogie, so the developed variable gauge bogie should adopt a lightweight design as much as possible. Considering the effects of braking efficiency and caliper follow-up on the braking effect of variable gauge bogie, the basic braking should be given priority to the axle disc braking, followed by the wheel disc braking. Sanding device shall not be used for bogie of EMU, if it is absolutely necessary, considering using a hose connection between the sandbox and the sandblasting nozzle to adapt to the motion compensation when the gauge changes. While researching and developing the variable gauge bogie, attention should be paid to the wide use of ground track changing device, so that they can also meet the requirements of simplicity and standardization. The development of variable gauge bogie must consider the clearance requirements of different gauge railways, the greater the gauge difference, the higher the clearance requirement. On the rolling vibration test-bed of Southwest Jiaotong University, the maximum running speed of the developed EMU reaches 602 km·h^-1 under the condition of applying line spectrum excitation of Chinese passenger dedicated line and it was successfully launched in October 21, 2020. 2 tabs, 10 figs, 36 refs.
- EMUs,
- variable gauge bogie,
- axle box bearing,
- ground track changing device,
- motor suspension mode,
- clearance

FullText(HTML)

References(36)

References

[1]	金万建. 我国铁路开展国际联运及国际通道的发展[J]. 铁道运输与经济, 2003, 25(3): 4-8. doi: 10.3969/j.issn.1003-1421.2003.03.003 JIN Wan-jian. The international corridor transportation implemented by Chinese railway and the development of international corridor[J]. Railway Transport and Economy, 2003, 25(3): 4-8. (in Chinese) doi: 10.3969/j.issn.1003-1421.2003.03.003
[2]	徐彬, 黄志辉, 舒友, 等. 变轨距转向架研制与应用思考[J]. 机车电传动, 2018, 262(3): 14-17. https://www.cnki.com.cn/Article/CJFDTOTAL-JCDC201803002.htm XU Bin, HUANG Zhi-hui, SHU You, et al. Development and application strategy of gauge-changeable bogies[J]. Electric Drive for Locomotives, 2018, 262(3): 14-17. (in Chinese) https://www.cnki.com.cn/Article/CJFDTOTAL-JCDC201803002.htm
[3]	李芾, 邵亚堂, 黄运华, 等. 国外变轨距列车及其转向架的发展与研究[J]. 机车电传动, 2018, 262(3): 1-13. https://www.cnki.com.cn/Article/CJFDTOTAL-JCDC201803001.htm LI Fu, SHAO Ya-tang, HUANG Yun-hua, et al. Development and research of foreign gauge-changeable train and bogie[J]. Electric Drive for Locomotives, 2018, 262(3): 1-13. (in Chinese) https://www.cnki.com.cn/Article/CJFDTOTAL-JCDC201803001.htm
[4]	NETZEL A. Derautomatisch umspurbare HGV-Triebzug Talgo 250[J]. ZEV Rail Glasers Annalen, 2008, 132: 170-171. http://cat.inist.fr/?aModele=afficheN&cpsidt=20940983
[5]	SALIGER W. Gauge-adjustable wheelsets[J]. Rail Internation, 2000, 31(5): 7-13. http://www.researchgate.net/publication/294098812_Gauge-adjustable_wheelsets
[6]	WILHELM S. 可调轨距轮对[J]. 国外内燃机车, 2002, 362(2): 28-33. https://www.cnki.com.cn/Article/CJFDTOTAL-GWMJ200202009.htm WILHELM S. Adjustable gauge wheelset[J]. Foreign Diesel Locomotives, 2002, 362(2): 28-33. (in Chinese) https://www.cnki.com.cn/Article/CJFDTOTAL-GWMJ200202009.htm
[7]	范燕. 可变轨距货车轮对[J]. 国外铁道车辆, 2000, 37(4): 45. https://www.cnki.com.cn/Article/CJFDTOTAL-GWTD200004016.htm FAN Yan. Variable gauge freight wheelsets[J]. Foreign Rolling Stock, 2000, 37(4): 45. (in Chinese) https://www.cnki.com.cn/Article/CJFDTOTAL-GWTD200004016.htm
[8]	NORIAKI T, 周贤全. 可变轨距转向架的开发[J]. 国外铁道车辆, 2006, 43(1): 27-31. doi: 10.3969/j.issn.1002-7610.2006.01.006 NORIAKI T, ZHOU Xian-quan. Development of variable gauge bogies[J]. Foreign Rolling Stock, 2006, 43(1): 27-31. (in Chinese) doi: 10.3969/j.issn.1002-7610.2006.01.006
[9]	GYR C, DEISS C, FORCLAZ J M. Development of a gauge-changing trailer bogie (type EV09)[J]. Research Gate, 2011, 135: 130-139. http://www.researchgate.net/publication/292907541_Development_of_a_gauge-changing_trailer_bogie_type_EV09
[10]	CHRISTOPH G, CHRISTOPH D, JEAN M F. Entwicklung eines spurwechselfähigen Laufdrehgestells (type EV09)[J]. ZEV Rail Glasers Annalen, 2011, 135: 130-139. http://cat.inist.fr/?amodele=affichen&cpsidt=24766617
[11]	KIM C S, CHANG C S, JANG S H, et al. Structural analysis of locking parts in the gauge-adjustable wheelset[J]. Journal of the Korean Society for Railway, 2008, 11(1): 33-38. http://www.researchgate.net/publication/263999733_Structural_Analysis_of_Locking_Parts_in_the_Gauge_-Adjustable_Wheelset
[12]	黄运华, 李芾. 铁道车辆轮对变轨距技术研究[J]. 铁道车辆, 2002, 40(7): 8-11. doi: 10.3969/j.issn.1002-7602.2002.07.003 HUANG Yun-hua, LI Fu. Research on gauge changing technology of railway vehicle wheelset[J]. Rolling Stock, 2002, 40(7): 8-11. (in Chinese) doi: 10.3969/j.issn.1002-7602.2002.07.003
[13]	刘寅华, 李芾, 黄运华. 铁道货车变轨距轮对结构方案设计[J]. 铁道机车车辆, 2006, 26(6): 13-15. doi: 10.3969/j.issn.1008-7842.2006.06.005 LIU Yin-hua, LI Fu, HUANG Yun-hua. Structure scheme of gauge-changeable wheelsets for freight car[J]. Railway Locomotive and Car, 2006, 26(6): 13-15. (in Chinese) doi: 10.3969/j.issn.1008-7842.2006.06.005
[14]	张良威, 李芾, 黄运华. 变轨距转向架锁紧机构方案设计[J]. 铁道机车车辆, 2007, 27(5): 6-8. doi: 10.3969/j.issn.1008-7842.2007.05.003 ZHANG Liang-wei, LI Fu, HUANG Yun-hua. Scheme design of locking mechanism of gauge-changeable bogie[J]. Railway Locomotive and Car, 2007, 27(5): 6-8. (in Chinese) doi: 10.3969/j.issn.1008-7842.2007.05.003
[15]	崔红伟, 黄志辉, 周殿买, 等. 1 435/1 000 mm变轨距转向架轮对轴箱设计[J]. 机车电传动, 2018, 264(5): 9-12. https://www.cnki.com.cn/Article/CJFDTOTAL-JCDC201805003.htm CUI Hong-wei, HUANG Zhi-hui, ZHOU Dian-mai, et al. Design of wheelset axle box for 1 435/1 000 mm gauge-changeable bogie[J]. Electric Drive for Locomotives, 2018, 264(5): 9-12. (in Chinese) https://www.cnki.com.cn/Article/CJFDTOTAL-JCDC201805003.htm
[16]	邵亚堂, 黄运华, 张隶新, 等. 变轨距列车用地面变轨设施方案设计[J]. 机车电传动, 2018, 263(4): 10-14. https://www.cnki.com.cn/Article/CJFDTOTAL-JCDC201804004.htm SHAO Ya-tang, HUANG Yun-hua, ZHANG Li-xin, et al. Scheme design of ground transformation facility for gauge-changeable trains[J]. Electric Drive for Locomotives, 2018, 263(4): 10-14. (in Chinese) https://www.cnki.com.cn/Article/CJFDTOTAL-JCDC201804004.htm
[17]	史炎, 何健. 钓竿式变轨距转向架动力学研究[J]. 铁道机车车辆, 2018, 38(1): 7-9. doi: 10.3969/j.issn.1008-7842.2018.01.02 SHI Yan, HE Jian. Design and dynamics of fishing rod gauge-changeable bogie[J]. Railway Locomotive and Car, 2018, 38(1): 7-9. (in Chinese) doi: 10.3969/j.issn.1008-7842.2018.01.02
[18]	李涛. 高速变轨距转向架设计及动力学性能研究[D]. 成都: 西南交通大学, 2018. LI Tao. Research on design and dynamics performance of high-speed gauge changeable bogie[D]. Chengdu: Southwest Jiaotong University, 2018. (in Chinese)
[19]	韩光旭, 周殿买, 黄志辉. 高速变轨距转向架轴箱轴承选型及寿命评估[J]. 机车电传动, 2018, 263(4): 6-9. https://www.cnki.com.cn/Article/CJFDTOTAL-JCDC201804003.htm HAN Guang-xu, ZHOU Dian-mai, HUANG Zhi-hui. Type selection and life assessment of high-speed gauge-changeable bogie axle box bearing[J]. Electric Drive for Locomotives, 2018, 263(4): 6-9. (in Chinese) https://www.cnki.com.cn/Article/CJFDTOTAL-JCDC201804003.htm
[20]	邹纪操, 傅茂海, 李朝曦, 等. 高速变轨距动车组转向架滑动套配合量影响研究[J]. 机车电传动, 2018, 264(5): 1-4. https://www.cnki.com.cn/Article/CJFDTOTAL-JCDC201805001.htm ZOU Ji-cao, FU Mao-hai, LI Chao-xi, et al. Research on the fit value influence of high-speed gauge-changeable EMUs bogie sleeve[J]. Electric Drive for Locomotives, 2018, 264(5): 1-4. (in Chinese) https://www.cnki.com.cn/Article/CJFDTOTAL-JCDC201805001.htm
[21]	孔瑞晨, 周殿买, 黄志辉, 等. 高速变轨距动车组转向架解锁-锁紧装置设计[J]. 机车电传动, 2018, 264(5): 5-8. https://www.cnki.com.cn/Article/CJFDTOTAL-JCDC201805002.htm KONG Rui-chen, ZHOU Dian-mai, HUANG Zhi-hui, et al. Design of unlocking-locking device for high-speed gauge-changeable EMUs' bogie[J]. Electric Drive for Locomotives, 2018, 264(5): 5-8. (in Chinese) https://www.cnki.com.cn/Article/CJFDTOTAL-JCDC201805002.htm
[22]	刘晓妍, 黄运华, 张隶新, 等. 600/1 067 mm变轨距动车组转向架方案选型分析[J]. 机车电传动, 2018, 265(6): 33-37. https://www.cnki.com.cn/Article/CJFDTOTAL-JCDC201806008.htm LIU Xiao-yan, HUANG Yun-hua, ZHANG Li-xin, et al. Model selection analysis of 600/1 067 mm gauge changeable bogie[J]. Electric Drive for Locomotives, 2018, 265(6): 33-37. (in Chinese) https://www.cnki.com.cn/Article/CJFDTOTAL-JCDC201806008.htm
[23]	CARBALLEIRA J, BAEZA L, ROVIRA A, et al. Technical characteristics and dynamic modelling of Talgo trains[J]. Vehicle System Dynamics, 2008, 46: 301-316. doi: 10.1080/00423110801939170
[24]	LÓPEZ GÓMEZ J L, LACASTA AÍSA J. Talgo automatic gauge change system for freight wagons[J]. Journal of Rail and Rapid Transit, 2001, 215(1): 13-24. doi: 10.1243/0954409011530586
[25]	KAISER I, VINOLAS J, GÓMEZ DELPULGAR D, et al. Contribution of variable gauge freight wheelsets to interoperability[J]. Journal of Rail and Rapid Transit, 2019, 233(5): 489-505. doi: 10.1177/0954409718804960
[26]	小田和裕, 高魁源. 可变轨距电动车的开发与试验[J]. 国外铁道车辆, 2001, 38(5): 31-35. https://www.cnki.com.cn/Article/CJFDTOTAL-GWTD200105009.htm ODA K, GAO Kui-yuan. Development and test of variable gauge electric vehicle[J]. Foreign Rolling Stock, 2001, 38(5): 31-35. (in Chinese) https://www.cnki.com.cn/Article/CJFDTOTAL-GWTD200105009.htm
[27]	HIDEYUKI T, TADAO O. Gauge change equipment in shin-shimonoseki depot[J]. Quarterly Reports of RTRI, 2003, 44(3): 114-116. doi: 10.2219/rtriqr.44.114
[28]	KOICHI M, MINORU K, SHIGETOMO S. Development of traction motor for gauge change train[J]. IEEJ Transaction on Industry Applications, 2001, 121(5): 569-576. doi: 10.1541/ieejias.121.569
[29]	TAKAO K, ISHIGE M. Structure of an independent-wheel- system bogie with a DDM and its performance at high speed[J]. Quarterly Report of RTRI, 2008, 49(4): 199-202. doi: 10.2219/rtriqr.49.199
[30]	WAKIYA H. Development of gauge change train in Japan[J]. Japanese Railway Engineering, 2010, 50(2): 12-15. http://www.researchgate.net/publication/294383929_Development_of_gauge_change_train_in_Japan
[31]	TOKUDA N, OKAMATO I, FUJITA T, et al. Development of gauge change bogies[J]. Quarterly Report of RTRI, 2003, 44(3): 109-113. http://ci.nii.ac.jp/naid/130004457648
[32]	刘长青, 王雷. 400 km/h跨国互联互通高速动车组[J]. 机车电传动, 2020, 273(2): 1-6. https://www.cnki.com.cn/Article/CJFDTOTAL-JCDC202002001.htm LIU Chang-qing, WANG Lei. 400 km/h international interconnection high speed EMU[J]. Electric Drive for Locomotives, 2020, 273(2): 1-6. (in Chinese) https://www.cnki.com.cn/Article/CJFDTOTAL-JCDC202002001.htm
[33]	冷扬立, 李秋泽, 李庆国, 等. CRH5型动车组万向轴结构及临界转速分析[J]. 铁道车辆, 2010, 48(12): 6-11. https://www.cnki.com.cn/Article/CJFDTOTAL-TDCL201012003.htm LENG Yang-li, LI Qiu-ze, LI Qing-guo, et al. Analysis of the structure and critical rotating speed of the cardan shafts for CRH5 multiple units[J]. Rolling Stock, 2010, 48(12): 6-11. (in Chinese) https://www.cnki.com.cn/Article/CJFDTOTAL-TDCL201012003.htm
[34]	李国栋, 曾京, 李晓峰, 等. 基于变轨距高速动车组适应性的动力学性能分析[J]. 机车电传动, 2019, 270(5): 20-24. https://www.cnki.com.cn/Article/CJFDTOTAL-JCDC201905005.htm LI Guo-dong, ZENG Jing, LI Xiao-feng, et al. Dynamic performance analysis of adaptability of gauge changeable high-speed EMUs[J]. Electric Drive for Locomotives, 2019, 270(5): 20-24. (in Chinese) https://www.cnki.com.cn/Article/CJFDTOTAL-JCDC201905005.htm
[35]	黄志辉, 夏朝国, 胡飞飞, 等. 变轨距轮对轴套式花键的设计[J]. 机车电传动, 2018, 263(4): 1-5. https://www.cnki.com.cn/Article/CJFDTOTAL-JCDC201804001.htm HUANG Zhi-hui, XIA Chao-guo, HU Fei-fei, et al. Design of axle sleeve type spline of gauge-changeable wheelset[J]. Electric Drive for Locomotives, 2018, 263(4): 1-5. (in Chinese) https://www.cnki.com.cn/Article/CJFDTOTAL-JCDC201804001.htm
[36]	胡飞飞, 黄志辉, 郑志伟. 高速变轨距动车组转向架轮轴传动方案设计[J]. 机车电传动, 2020, 274(3): 30-34. https://www.cnki.com.cn/Article/CJFDTOTAL-JCDC202003007.htm HU Fei-fei, HUANG Zhi-hui, ZHENG Zhi-wei. Design of wheel-axle transmission scheme for high-speed variable-gauge EMU bogie[J]. Electric Drive for Locomotives, 2020, 274(3): 30-34. (in Chinese) https://www.cnki.com.cn/Article/CJFDTOTAL-JCDC202003007.htm

Relative Articles

Supplements(0)

Cited By

Proportional views

Proportional views

通讯作者: 陈斌, bchen63@163.com

1.
沈阳化工大学材料科学与工程学院沈阳 110142

Get Citation

PDF

XML

Article Metrics

Article views (1172) PDF downloads(459)

Review on key technologies of 400 km·h^-1 variable gauge EMUs bogies

doi: 10.19818/j.cnki.1671-1637.2021.01.017

Abstract

References

Proportional views

Catalog

通讯作者: 陈斌, bchen63@163.com

Article Metrics

Proportional views

Related

Review on key technologies of 400 km·h-1 variable gauge EMUs bogies

doi: 10.19818/j.cnki.1671-1637.2021.01.017

Abstract

References

Proportional views

Catalog

通讯作者: 陈斌, bchen63@163.com

Article Metrics

Proportional views

Related

Export File

Citation

Format

Content

Review on key technologies of 400 km·h^-1 variable gauge EMUs bogies