Research on viscosity property of asphalt mortar

LI Ping; ZHANG Zheng-qi; SUN Hong-wei; WANG Bing-gang

Volume 8 Issue 2

Turn off MathJax

Article Contents

Article Navigation > Journal of Traffic and Transportation Engineering > 2008 > 8(2): 49-52

Next Previous

LI Ping, ZHANG Zheng-qi, SUN Hong-wei, WANG Bing-gang. Research on viscosity property of asphalt mortar[J]. Journal of Traffic and Transportation Engineering, 2008, 8(2): 49-52.

Citation:

LI Ping, ZHANG Zheng-qi, SUN Hong-wei, WANG Bing-gang. Research on viscosity property of asphalt mortar[J]. Journal of Traffic and Transportation Engineering, 2008, 8(2): 49-52.

LI Ping, ZHANG Zheng-qi, SUN Hong-wei, WANG Bing-gang. Research on viscosity property of asphalt mortar[J]. Journal of Traffic and Transportation Engineering, 2008, 8(2): 49-52.

Citation:

LI Ping, ZHANG Zheng-qi, SUN Hong-wei, WANG Bing-gang. Research on viscosity property of asphalt mortar[J]. Journal of Traffic and Transportation Engineering, 2008, 8(2): 49-52.

PDF( 497 KB)

Research on viscosity property of asphalt mortar

1.
School of Highway Engineering, Changsha University of Science and Technology, Changsha 410076, Hunan, China
2.
Key Laboratory for Special Area Highway Engineering of Ministry of Education, Chang'an University, Xi'an 710064, Shaanxi, China

More Information

Author Bio:
Li Ping(1978-), male, PhD, lecturer, +86-731-2309573, lipingchd@126.com
Received Date: 2007-08-18
Publish Date: 2008-04-25

Abstract

Abstract

In order to analyze the influence of mineral power on asphalt mortar viscosity, Brookfield viscometer was used to test the viscosities of asphalt mortars with different filler types and filler bitumen ratios, and the influencing factors were studied.Test result shows that there is 4.7 times gap among the viscosities of different mortars, and the gap is bigger with the increase of filler bitumen ratio; adding mineral power can reduce the temperature sensitivity of the mortar, but which is affected by mineral power type and dosage; the difference of construction temperatures among different asphalt mortars can reach about 30 ℃.So it is necessary to filtrate the mineral power type according to mineral power character for reducing the bad effect on asphalt mixture performance, and modify the determination method of active mixture construction temperature for considering the function of mineral power.
- pavement engineering,
- asphalt mortar,
- viscosity,
- construction temperature

FullText(HTML)

References(10)

References

[1]	Zhang Zheng-qi, Wang Yong-cai. Influence of asphalt mortar onhot mix asphalt performance at high and low temperature[J]. Journal of Chang'an University: Natural Science Edition, 2006, 26(2): 1-5. (in Chinese)
[2]	Szydlo A, Mackiewicz P. Asphalt mixes deformation sensitivity to change in rheological parameters[J]. Journal of Materials in Civil Engineering, 2005, 17(1): 1-9.
[3]	Du Shun-cheng, Dai Jing-liang. Permanent deformation evaluation index of asphalt mixture[J]. China Journal of Highway and Transport, 2006, 19(5): 18-22. (in Chinese)
[4]	Wang Peng, Zeng Fan-qi, Huang Xiao-ming. Grey relation degree analysis of high-temperature performance indexes of asphalt[J]. Journal of Traffic and Transportation Engineering, 2006, 6(3): 32-36. (in Chinese)
[5]	Yildirim Y, Ideker J, Hazlett D. Evaluation of viscosity valuesfor mixing and compaction temperatures[J]. Journal of Materials in Civil Engineering, 2006, 18(4): 545-553.
[6]	Yao Ai-ling, Xu De-long, Sun Zhi-jun. Performance test on asphalt mixture of slag powder as filling[J]. China Journal of Highway and Transport, 2006, 19(6): 25-29. (in Chinese)
[7]	Zeng Fan-qi, Huang Xiao-ming, Li Hai-jun. Evaluation method of differential scanning calorimetry for asphalt performance[J]. Journal of Traffic and Transportation Engineering, 2005, 5(4): 37-42. (in Chinese)
[8]	Chen Hua-xin, Li Ning-li, Zhang Zheng-qi, et al. Temperature susceptibility analysis of asphalt binders[J]. Journal of Chang'an University: Natural Science Edition, 2006, 26(1): 8-11. (in Chinese)
[9]	Peng Bo, Ding Zhi-yong, Dai Jing-liang. Road performance comparison of different asphalt mastics[J]. Journal of Traffic and Transportation Engineering, 2007, 7(3): 61-65. (in Chinese)
[10]	Rasmussen R O, Lytton R L, Chang G K. Methodto predict temperature susceptibility of an asphalt binder[J]. Journal of Materials in Civil Engineering, 2002, 14(3): 246-252.