Citation: | GAN Feng, DAI Huan-yun, GAO Hao. Calculation method of accurate wheel-rail contact relationship of worn wheel tread[J]. Journal of Traffic and Transportation Engineering, 2014, 14(3): 43-51. |
[1] |
金学松, 沈志云. 轮轨滚动接触疲劳问题研究的最新进展[J]. 铁道学报, 2001, 23 (2): 92-108. doi: 10.3321/j.issn:1001-8360.2001.02.019
JIN Xue-song, SHEN Zhi-yun. Rolling contact fatigue of wheel/rail and its advanced research progress[J]. Journal of the China Railway Society, 2001, 23 (2): 92-108. (in Chinese). doi: 10.3321/j.issn:1001-8360.2001.02.019
|
[2] |
金学松, 张雪珊, 张剑, 等. 轮轨关系研究中的力学问题[J]. 机械强度, 2005, 27 (4): 408-418. doi: 10.3321/j.issn:1001-9669.2005.04.002
JIN Xue-song, ZHANG Xue-shan, ZHANG Jian, et al. Mechanics in performance of wheel-rail[J]. Journal of Mechanical Strength, 2005, 27 (4): 408-418. (in Chinese). doi: 10.3321/j.issn:1001-9669.2005.04.002
|
[3] |
ZAKHAROV S, GORYACHEVA I, BOGDANOV V, et al. Problems with wheel and rail profiles selection and optimization[J]. Wear, 2008, 265 (9/10): 1266-1272.
|
[4] |
李艳, 张卫华, 池茂儒, 等. 车轮踏面外形及轮径差对车辆动力学性能的影响[J]. 铁道学报, 2010, 32 (1): 104-108. doi: 10.3969/j.issn.1001-8360.2010.01.018
LI Yan, ZHANG Wei-hua, CHI Mao-ru, et al. Influence of wheel tread profile and rolling diameter difference on dynamic performance of vehicles[J]. Journal of the China Railway Society, 2010, 32 (1): 104-108. (in Chinese). doi: 10.3969/j.issn.1001-8360.2010.01.018
|
[5] |
POLACH O, Characteristic parameters of nonlinear wheel/rail contact geometry[J]. Vehicle System Dynamics: International Journal of Vehicle Mechanics and Mobility, 2010, 48 (S): 19-36.
|
[6] |
ARNOLD M, NETTER H. Approximation of contact geometry in the dynamical simulation of wheel/rail systems[J]. Mathematical Modelling of Systems, 1997, 3 (2): 1-24.
|
[7] |
ARNOLD M, NETTER H. Wear profiles and the dynamical simulation of wheel-rail systems[C]∥ECMI. Proceeding of the9th Conference of the European Consortium for Methematics in Industry: Progress in Industrial Mathematics. Stuttgart: B. G. Teubner Stuttgart Leipzig, 1997: 77-84.
|
[8] |
ARNOLD M. The geometry of wheel-rail contact[C]∥FRISCHMUTH K. Proceedings of the First Workshop on Dynamics of Wheel-Rail Systems. Rostock: University of Rostock, 1994: 1-6.
|
[9] |
SCHUPP G, WEIDEMANN C, MAUER L. Modelling the contact between wheel and rail within multibody system simulation[J]. Vehicle System Dynamics, 2004, 41 (5): 349-364. doi: 10.1080/00423110412331300326
|
[10] |
NETTER H, SCHUPP G, RULKA W, et al. New aspects of contact modelling and validation within multibody system simulation of railway vehicles[J]. Vehicle System Dynamics, 1998, 29 (S): 246-269.
|
[11] |
BS EN 13715∶2006, railway applications—wheelsets and bogies—wheels—wheels tread[S].
|
[12] |
张剑, 王玉艳, 金学松, 等. 改善轮轨接触状态的车轮型面几何设计方法[J]. 交通运输工程学报, 2011, 11 (1): 36-42. doi: 10.3969/j.issn.1671-1637.2011.01.007
ZHANG Jian, WANG Yu-yan, JIN Xue-song, et al. Geometric design method of wheel profile for improving wheel and rail contact status[J]. Journal of Traffic and Transportation Engineering, 2011, 11 (1): 36-42. (in Chinese). doi: 10.3969/j.issn.1671-1637.2011.01.007
|
[13] |
钟晓波, 沈钢. 高速列车车轮踏面外形优化设计[J]. 同济大学学报: 自然科学版, 2011, 39 (5): 710-715. doi: 10.3969/j.issn.0253-374x.2011.05.015
ZHONG Xiao-bo, SHEN Gang. Optimization for high-speed wheel profiles[J]. Journal of Tongji University: Natural Science, 2011, 39 (5): 710-715. (in Chinese). doi: 10.3969/j.issn.0253-374x.2011.05.015
|
[14] |
崔大宾, 李立, 金学松, 等. 基于轮轨法向间隙的车轮踏面优化方法[J]. 机械工程学报, 2009, 45 (12): 205-211. https://www.cnki.com.cn/Article/CJFDTOTAL-JXXB200912038.htm
CUI Da-bin, LI Li, JIN Xue-song, et al. Numerical optimization technique for wheel profile considering the normal gap of the wheel and rail[J]. Journal of Mechanical Engineering, 2009, 45 (12): 205-211. (in Chinese). https://www.cnki.com.cn/Article/CJFDTOTAL-JXXB200912038.htm
|
[15] |
薛弼一, 崔大宾, 李立, 等. 车轮踏面并行反求设计方法[J]. 机械工程学报, 2013, 49 (16): 8-16. https://www.cnki.com.cn/Article/CJFDTOTAL-JXXB201316003.htm
XUE Bi-yi, CUI Da-bin, LI Li, et al. Parallel inverse design method of wheel profile[J]. Journal of Mechanical Engineering, 2013, 49 (16): 8-16. (in Chinese). https://www.cnki.com.cn/Article/CJFDTOTAL-JXXB201316003.htm
|
[16] |
周睿, 罗仁. 地铁车辆轮轨匹配关系研究[J]. 铁道车辆, 2010, 48 (9): 1-3, 12. doi: 10.3969/j.issn.1002-7602.2010.09.001
ZHOU Rui, LUO Ren. Research on wheel-rail matching relation of metro vehicles[J]. Rolling Stock, 2010, 48 (9): 1-3, 12. (in Chinese). doi: 10.3969/j.issn.1002-7602.2010.09.001
|
[17] |
ARSLAN M A, KAYABASI O. 3-D rail-wheel contact analysis using FEA[J]. Advances in Engineering Software, 2012, 45 (1): 325-331. doi: 10.1016/j.advengsoft.2011.10.009
|
[18] |
WEN Ze-feng, JIN Xue-song, ZHANG Wei-hua. Contact-impact stress analysis of rail joint region using the dynamic finite element method[J]. Wear, 2005, 258 (7/8): 1301-1309.
|
[19] |
BS EN 15302∶2008, railway applications—method for determining the equivalent conicity[S].
|
[20] |
POLACH O. Influence of wheel/rail contact geometry on the behavior of a railway vehicle at stability limit[C]∥Eindhoven University of Technology. Proceedings of the ENOC-2005. Eindhoven: Eindhoven University of Technology, 2005: 2203-2210.
|
[21] |
干锋, 戴焕云, 高浩, 等. 铁道车辆不同踏面等效锥度和轮轨接触关系计算[J]. 铁道学报, 2013, 35 (9): 19-24. doi: 10.3969/j.issn.1001-8360.2013.09.004
GAN Feng, DAI Huan-yun, GAO Hao, et al. Calculation of equivalent conicity and wheel-rail contact relationship of different railway vehicle treads[J]. Journal of the China Railway Society, 2013, 35 (9): 19-24. (in Chinese). doi: 10.3969/j.issn.1001-8360.2013.09.004
|