Volume 17 Issue 5
. 
Turn off MathJax
Article Contents
Article Navigation >  Journal of Traffic and Transportation Engineering  > 2017  >  17(5): 138-148
WANG Ya-xiong, CAI Yu-meng, WANG Jian, YAO Ming, CHEN Shi-an. Design method of active suspension LQG controller for rolling motion safety of vehicle[J]. Journal of Traffic and Transportation Engineering, 2017, 17(5): 138-148.
Citation: WANG Ya-xiong, CAI Yu-meng, WANG Jian, YAO Ming, CHEN Shi-an. Design method of active suspension LQG controller for rolling motion safety of vehicle[J]. Journal of Traffic and Transportation Engineering, 2017, 17(5): 138-148.
shu

Design method of active suspension LQG controller for rolling motion safety of vehicle

  • 1.

    School of Mechanical Engineering and Automation, Fuzhou University, Fuzhou 350116, Fujian, China

  • 2.

    School of Automotive and Traffic Engineering, Jiangsu University, Zhenjiang 212013, Jiangsu, China

More Information
  • Author Bio:

    WANG Ya-xiong(1988-), male, associate professor, PhD, yxwang@fzu.edu.cn

  • Corresponding author: CHEN Shi-an(1973-), male, professor, PhD, chenshian73@ujs.edu.cn
  • Received Date: 2017-05-29
  • Publish Date: 2017-10-25
    Abstract
  • To improve the steering-rolling motion safety of vehicle, a LQG controller for active suspension was developed.A dynamics model with 3 degrees of freedom depicting vehicle steering-rolling motion was established.Lateral-load transfer ratio (LTR), rolling angle and its acceleration were chosen to construct the evaluating indexes of comprehensive performance for vehicle rolling motion safety.In order to solve the problem that the general design approachs couldn't track the system disturbance term, namely the steered angle of front axle, and the control vector couldn't be solved because the determinant of weighted control coefficient matrix equaled to zero, the new method was scheduled as follows: the steered angle of front axle was introduced into a differential equation in accord with the minimum phase system, the differential equation was combined with the original system equation into an augmented system equation, andthe infinitely small terms including control terms were added to the evaluating indexes of comprehensive performance to meet the design condition of LQG controller.Based on the analytic hierarchy process (AHP) and normalization method, the statistical data of automotive steering-rolling motion were obtained by simulation under fish-hook working condition, and then the weighted coefficients of LQG controller were determined.The working effects of LQG controller of active suspension for steering-rolling motion safety of vehicle were verified by numerical simulation under multiple working conditions.Simulation result shows that the developed LQG controller does not interfere with the steering operation of driver.Compared with the passive suspension, when the active suspension is regulated by the developed LQG controller under fish-hook working condition, slalom working condition and double-lane change working condition, the variances of LTR, namely the most important evaluating index of rolling motion safety, decrease by 32.08%, 32.82%, and 29.24%, respectively, the variances of rolling angle reduce by 47.74%, 44.19%, and 63.41%, respectively, and the variances of rolling angle acceleration reduce by 87.30%, 60.00%, and 86.39%, respectively.So, adopting the active suspension with the new developed LQG controller can significantly improve the rolling motion safety of vehicle and achieve good steering condition adaptability.

     

    • FullText(HTML)
  • loading
    • References(25)
  • [1]
    FARMER C M, LUND A K. Rollover risk of cars and light trucks after accounting for driver and environmental factors[J]. Accident Analysis and Prevention, 2002, 34 (2): 163-173. doi: 10.1016/S0001-4575(01)00010-0
    [2]
    CHENG C, CEBON D. Improving roll stability of articulated heavy vehicles using active semi-trailer steering[J]. Vehicle System Dynamics, 2008, 46 (S1): 373-388.
    [3]
    YOON J, CHO W, KANG Ju-yong, et al. Design and evaluation of a unified chassis control system for rollover prevention and vehicle stability improvement on a virtual test track[J]. Control Engineering Practice, 2010, 18 (6): 585-597. doi: 10.1016/j.conengprac.2010.02.012
    [4]
    VAN DER WESTHUIZEN S F, ELS P S. Slow active suspension control for rollover prevention[J]. Journal of Terramechanics, 2013, 50 (1): 29-36. doi: 10.1016/j.jterra.2012.10.001
    [5]
    CHEN Shi-an, WANG Jun-cheng, YAO Ming, et al. Improved optimal sliding mode control for a non-linear vehicle active suspension system[J]. Journal of Sound and Vibration, 2017, 395: 1-25. doi: 10.1016/j.jsv.2017.02.017
    [6]
    JIN Xian-jian, YIN Guo-dong, BIAN Cheng-tong, et al. Gain-scheduled vehicle handling stability control via integration of active front steering and suspension systems[J]. Journal of Dynamic Systems, Measurement, and Control, 2016, 138 (1): 1-12.
    [7]
    黄志刚, 毛恩荣, 梁新成, 等. 汽车悬架发展的研究[J]. 机械设计与制造, 2006 (11): 168-169. doi: 10.3969/j.issn.1001-3997.2006.11.071

    HUANG Zhi-gang, MAO En-rong, LIANG Xin-cheng, et al. Study of automobile's suspension development[J]. Machinery Design and Manufacture, 2006 (11): 168-169. (in Chinese). doi: 10.3969/j.issn.1001-3997.2006.11.071
    [8]
    ACARMAN T, ÖZGÜNER Ü. Rollover prevention for heavy trucks using frequency shaped sliding mode control[J]. Vehicle System Dynamics, 2006, 44 (10): 737-762. doi: 10.1080/00423110600610402
    [9]
    YIM Seong-jin, PARK Y, YI K. Design of active suspension and electronic stability program for rollover prevention[J]. International Journal of Automotive Technology, 2010, 11 (2): 147-153. doi: 10.1007/s12239-010-0020-6
    [10]
    YIM Seong-jin. Design of a robust controller for rollover prevention with active suspension and differential braking[J]. Journal of Mechanical Science and Technology, 2012, 26 (1): 213-222. doi: 10.1007/s12206-011-0915-9
    [11]
    郭全民, 雷蓓蓓. 半主动悬架PID控制的研究和优化[J]. 国外电子测量技术, 2015, 34 (4): 60-63. doi: 10.3969/j.issn.1002-8978.2015.04.014

    GUO Quan-min, LEI Bei-bei. Research and optimization for semi-active suspension PID control[J]. Foreign Electronic Measurement Technology, 2015, 34 (4): 60-63. (in Chinese). doi: 10.3969/j.issn.1002-8978.2015.04.014
    [12]
    陈杰平, 冯武堂, 郭万山, 等. 整车磁流变减振器半主动悬架变论域模糊控制策略[J]. 农业机械学报, 2011, 42 (5): 7-13, 19. https://www.cnki.com.cn/Article/CJFDTOTAL-NYJX201105001.htm

    CHEN Jie-ping, FENG Wu-tang, GUO Wan-shan, et al. Whole vehicle magneto-rheological fluid damper semi-active suspension variable universe fuzzy control simulation and test[J]. Transactions of the Chinese Society for Agricultural Machinery, 2011, 42 (5): 7-13, 19. (in Chinese). https://www.cnki.com.cn/Article/CJFDTOTAL-NYJX201105001.htm
    [13]
    BALAKRISHNAN B M, RAJARAM M. Investigations on vehicle rollover prevention using LQG regulator[J]. Advances in Mathematical Physics, 2014: 1-11.
    [14]
    廖聪, 吴新烨, 黄红武. 客车半主动悬架防侧翻模糊滑模控制[J]. 厦门大学学报: 自然科学版, 2014, 53 (3): 373-377. https://www.cnki.com.cn/Article/CJFDTOTAL-XDZK201403017.htm

    LIAO Cong, WU Xin-ye, HUANG Hong-wu. Semi-active suspension anti rollover control for bus using fuzzy sliding mode theory[J]. Journal of Xiamen University: Natural Science, 2014, 53 (3): 373-377. (in Chinese). https://www.cnki.com.cn/Article/CJFDTOTAL-XDZK201403017.htm
    [15]
    CHAI Ling-jiang, SUN Tao. The design of LQG controller for active suspension based on analytic hierarchy process[J]. Mathematical problems in Engineering, 2010: 1-19.
    [16]
    MIÈGE A J P, CEBON D. Active roll control of an experimental articulated vehicle[J]. Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering, 2005, 219 (6): 791-806. doi: 10.1243/095440705X28385
    [17]
    周博, 申海龙. 基于ADAMS的汽车侧翻仿真分析[J]. 大连交通大学学报, 2017, 38 (5): 27-32. https://www.cnki.com.cn/Article/CJFDTOTAL-DLTD201705008.htm

    ZHOU Bo, SHEN Hai-long. Analysis and research of vehicle rollover simulation based on ADAMS[J]. Journal of Dalian Jiaotong University, 2017, 38 (5): 27-32. (in Chinese). https://www.cnki.com.cn/Article/CJFDTOTAL-DLTD201705008.htm
    [18]
    靳立强, 石冠男, 于雅静, 等. 基于零力矩点位置和模糊控制的商用车防侧翻控制[J]. 汽车工程, 2017, 39 (9): 1062-1067. https://www.cnki.com.cn/Article/CJFDTOTAL-QCGC201709013.htm

    JIN Li-qiang, SHI Guan-nan, YU Ya-jing, et al. Anti-roll control for commercial vehicles based on zero-moment point position and fuzzy control[J]. Automotive Engineering, 2017, 39 (9): 1062-1067. (in Chinese). https://www.cnki.com.cn/Article/CJFDTOTAL-QCGC201709013.htm
    [19]
    余强, 马建. 主动悬架系统对汽车侧翻稳定性改善分析[J]. 中国公路学报, 2005, 18 (3): 114-117. https://www.cnki.com.cn/Article/CJFDTOTAL-ZGGL200503024.htm

    YU Qiang, MA Jian. Analysis of improvement on automobile side tumbling stability with active suspension system[J]. China Journal of Highway and Transport, 2005, 18 (3): 114-117. (in Chinese). https://www.cnki.com.cn/Article/CJFDTOTAL-ZGGL200503024.htm
    [20]
    YU Jing, CHEN Xiao-qian, CHEN Li-hu. Optimal planning of LEO active debris removal based on hybrid optimal control theory[J]. Advances in Space Research, 2015, 55 (11): 2628-2640. doi: 10.1016/j.asr.2015.02.026
    [21]
    柴陵江, 孙涛, 冯金芝, 等. 基于层次分析法的主动悬架LQG控制器设计[J]. 汽车工程, 2010, 32 (8): 712-718. https://www.cnki.com.cn/Article/CJFDTOTAL-QCGC201008016.htm

    CHAI Ling-jiang, SUN Tao, FENG Jin-zhi, et al. design of the LQG controller for active suspension system based on analytic hierarchy process[J]. Automotive Engineering, 2010, 32 (8): 712-718. (in Chinese). https://www.cnki.com.cn/Article/CJFDTOTAL-QCGC201008016.htm
    [22]
    陈士安, 邱峰, 何仁, 等. 一种确定车辆悬架LQG控制加权系数的方法[J]. 振动与冲击, 2008, 27 (2): 65-68, 176. https://www.cnki.com.cn/Article/CJFDTOTAL-ZDCJ200802013.htm

    CHEN Shi-an, QIU Feng, HE Ren, et al. A method for choosing weights in a suspension LQG control[J]. Journal of Vibration and Shock, 2008, 27 (2): 65-68, 176. (in Chinese). https://www.cnki.com.cn/Article/CJFDTOTAL-ZDCJ200802013.htm
    [23]
    杨益民, 杨旭兵, 景奉杰. 层次分析法中整体一致性判别及校正[J]. 武汉大学学报: 理学版, 2004, 50 (3): 306-310. https://www.cnki.com.cn/Article/CJFDTOTAL-WHDY200403011.htm

    YANG Yi-min, YANG Xu-bing, JING Feng-jie. Judgment and correction of global consistency in AHP[J]. Journal of Wuhan University: Natural Science Edition, 2004, 50 (3): 306-310. (in Chinese). https://www.cnki.com.cn/Article/CJFDTOTAL-WHDY200403011.htm
    [24]
    金智林. 运动型多功能汽车侧翻稳定性及防侧翻控制[D]. 南京: 南京航空航天大学, 2008.

    JIN Zhi-lin. Rollover stability and anti-roll control for sport utility vehicles[D]. Nanjing: Nanjing University of Aeronautics and Astronautics, 2008. (in Chinese).
    [25]
    CAI Yu-meng, JIANG You-liang, ZHANG Shi-jin, et al. Development and optimisation of an articulation system to improve intersection turning speed of bus rapid transit vehicle[J]. International Journal of Heavy Vehicle Systems, 2015, 22 (3): 213-235.
    • Relative Articles
    • Supplements(0)
    • Cited By
  • 加载中

Catalog

    通讯作者: 陈斌, bchen63@163.com
    • 1. 

      沈阳化工大学材料科学与工程学院 沈阳 110142

    1. 本站搜索
    2. 百度学术搜索
    3. 万方数据库搜索
    4. CNKI搜索
    Get Citation
    PDF
    XML

    Article Metrics

    Article views (499) PDF downloads(429) Cited by()
    Proportional views
    Related

    Copyright《Journal of Traffic and Transportation Engineering》编辑部陕ICP备05001904号-1

    Address ：Editorial Department of Journal of Traffic and Transportation Engineering, Chang 'an University, Middle Section of South Second Ring Road, Xi 'an, Shaanxi（710064） Tel：029-82334388 Email：jygc@chd.edu.cn

    All visit:Today's visit:

    Supported by: Beijing Renhe Information Technology Co. Ltd    

    /

    DownLoad:  Full-Size Img  PowerPoint
    Return
    Return