Volume 10 Issue 2
. 
Turn off MathJax
Article Contents
Article Navigation >  Journal of Traffic and Transportation Engineering  > 2010  >  10(2): 64-68
Next Previous
LIU Rong-xian, MA Ming-xing, YE Fei. Measurement and performance analysis of switch signal for automotive electrical acceleration pedal[J]. Journal of Traffic and Transportation Engineering, 2010, 10(2): 64-68. doi: 10.19818/j.cnki.1671-1637.2010.02.012
Citation: LIU Rong-xian, MA Ming-xing, YE Fei. Measurement and performance analysis of switch signal for automotive electrical acceleration pedal[J]. Journal of Traffic and Transportation Engineering, 2010, 10(2): 64-68. doi: 10.19818/j.cnki.1671-1637.2010.02.012
shu

Measurement and performance analysis of switch signal for automotive electrical acceleration pedal

doi: 10.19818/j.cnki.1671-1637.2010.02.012
  • 1.

    Automotive Engineering Experimental Plant, Yangzhou University, Yangzhou 225009, Jiangsu, China

  • 2.

    School of Mechanical Engineering, Yangzhou University, Yangzhou 225127, Jiangsu, China

More Information
  • Author Bio:

    LIU Rong-xian(1954-), male, senior engineer, +86-514-87858438, yzdfqc@yzcn.net

  • Received Date: 2010-01-21
  • Publish Date: 2010-04-25
    Abstract
  • A test system of automotive electrical acceleration pedal was designed based on non-contact angle replacement sensor and the output characteristics of idle switch due to stampeding speeds and sampling frequencies. With ADLink-PCI911DG acquisition card, PCI-DAQ virtual instrument technology and LabVIEW software, the angle sensor signal was transferred by A/D, was driven by DAQ, and the data acquisition was realized automatically. The key factors that affected the switch signal of electrical acceleration pedal were analyzed under fast press and fast release, fast press and slow release, slow press and fast release, slow press and slow release.The result shows that the speeds and frequencies are main influence factors, and the sampling frequencies are not less than 1 000 Hz to ensure measuring precision. The measuring errors are minimal under slow press and slow release, and the errors are maximal under fast press and fast release. Based on the result, some error reasons and solving measures are proposed.

     

    • FullText(HTML)
  • loading
    • References(10)
  • [1]
    FENG Neng-lian, DONG Chun-bo, BIN Yang, et al. Study on electronic throttle control systems[J]. Automobile Technology, 2004, 35 (1): 1-4. (in Chinese) https://www.cnki.com.cn/Article/CJFDTOTAL-QCJS200903006.htm
    [2]
    LI Meng-liang, SU Mao-hui, QIN Kong-jian, et al. Diesel engine load distribution and exhaust emissions under real-world driving condition[J]. Journal of Jiangsu University: Natural Science Edition, 2007, 28 (3): 213-215. (in Chinese)
    [3]
    YAO Chun-de, YANG Guang-feng, NI Pei-yong, et al. Tests of air heater heated by fuel for gasoline engine of vehicle[J]. China Journal of Highway and Transport, 2009, 22 (1): 116-119, 126. (in Chinese) https://www.cnki.com.cn/Article/CJFDTOTAL-ZGGL200901021.htm
    [4]
    LUO Kai-yu, LI Bo-quan, WANG Xiao-fei, et al. Study on mechanical rotor axis locus based on virtual instrument[J]. Journal of Jiangsu University: Natural Science Edition, 2008, 29 (6): 474-477. (in Chinese)
    [5]
    ZHANG Hong-qun, CAI Guo-ying. Design of signal measuring and analyzing based on virtual instrument technology[J]. Computer Technology and Development, 2008, 18 (2): 244-246, 250. (in Chinese) https://www.cnki.com.cn/Article/CJFDTOTAL-WJFZ200802070.htm
    [6]
    ZHENG Ting, WANG Yong. Application of the virtual instrument technologyinthe automatic testing system[J]. China Measurement Technology, 2006, 32 (1): 42-43. (in Chinese) https://www.cnki.com.cn/Article/CJFDTOTAL-SYCS200601013.htm
    [7]
    ZHANG Hong-guang, HE Hong, LI U Xing-hua, et al. Study of development of the electronically controlled fuel injection system of heavy duty diesel engine for vehicle[J]. China Journal of Highway and Transport, 2003, 16 (2): 103-107. (in Chinese) https://www.cnki.com.cn/Article/CJFDTOTAL-ZGGL200302025.htm
    [8]
    HALIDE, LI Bing, BI AN Yao-zhang. Wavelet analysis method for faults diagnosisin electronic controlled engine[J]. Journal of Chang an University: Natural Science Edition, 2007, 27 (3): 88-92. (in Chinese) https://www.cnki.com.cn/Article/CJFDTOTAL-XAGL200703019.htm
    [9]
    PANG Han, ZHANG Wei-gong, WANG Xia, et al. Terrain trafficability esti mating system of off-road vehicle based on virtue proving ground technology[J]. Journal of Traffic and Transportation Engineering, 2009, 9 (2): 79-82. (in Chinese) http://transport.chd.edu.cn/article/id/200902014
    [10]
    ZHANG Ke-xin, WU Yong-hong, WANG Li-ge, et al. Calibration of angle displacement sensor and analysis of uncertainty[J]. Aviation Metrology and Measurement Technology, 2004, 24 (5): 29-31. (in Chinese) https://www.cnki.com.cn/Article/CJFDTOTAL-HKJC200405011.htm
    • Relative Articles
    • Supplements(0)
    • Cited By

Catalog

    Get Citation
    PDF
    XML

    Article Metrics

    Article views (917) PDF downloads(649) Cited by()
    Related

    Copyright《Journal of Traffic and Transportation Engineering》编辑部陕ICP备05001904号-1

    Address ：Editorial Department of Journal of Traffic and Transportation Engineering, Chang 'an University, Middle Section of South Second Ring Road, Xi 'an, Shaanxi（710064） Tel：029-82334388 Email：jygc@chd.edu.cn

    All visit:Today's visit:

    Supported by: Beijing Renhe Information Technology Co. Ltd    

    /

    DownLoad:  Full-Size Img  PowerPoint
    Return
    Return