Rapid analysis method of weight-reduced orifice plate structure based on stiffness equivalence model

NEI Jing-xin; REN Jun-ming; TAN Wei; CHEN Li-jun

doi:10.19818/j.cnki.1671-1637.2019.03.010

Volume 19 Issue 3

Turn off MathJax

Article Contents

Article Navigation > Journal of Traffic and Transportation Engineering > 2019 > 19(3): 89-99

Next Previous

NEI Jing-xin, REN Jun-ming, TAN Wei, CHEN Li-jun. Rapid analysis method of weight-reduced orifice plate structure based on stiffness equivalence model[J]. Journal of Traffic and Transportation Engineering, 2019, 19(3): 89-99. doi: 10.19818/j.cnki.1671-1637.2019.03.010

Citation:

NEI Jing-xin, REN Jun-ming, TAN Wei, CHEN Li-jun. Rapid analysis method of weight-reduced orifice plate structure based on stiffness equivalence model[J]. Journal of Traffic and Transportation Engineering, 2019, 19(3): 89-99. doi: 10.19818/j.cnki.1671-1637.2019.03.010

Citation:

PDF( 8697 KB)

Rapid analysis method of weight-reduced orifice plate structure based on stiffness equivalence model

doi: 10.19818/j.cnki.1671-1637.2019.03.010

State Key Laboratory of Automotive Simulation and Control, Jilin University, Changchun 130022, Jilin, China

More Information

Author Bio:
NA Jing-xin(1957-), male, professor, najx@jlu.edu.cn
Corresponding author: CHENLi-jun(1960-), male, associate professor, chenlijun@jlu.edu.cn
Received Date: 2019-01-07
Publish Date: 2019-06-25

Abstract

Abstract

In order to calculate and analyze the structure of weight-reduced orifice plate more efficiently, a rapid analysis method was proposed. The general stiffness equivalence relationship between weight-reduced orifice plate structure model and planar plate structure model was researched. The relational expressions were established between the aperture, hole distance of weight-reduced orifice plate, the equivalent Young's modulus, and thickness of corresponding planar plate. The orifice plate structure model was replaced with equivalent planar plate structure model for deformation analysis. The local node displacement was applied to corresponding target hole model, and the stress distribution of target hole area was calculated. The accuracy of proposed method was verified by experiments and simulations. The stability of stiffness equivalence relationship was verified by applying different loads to an actual weight-reduced orifice plate structure. The effectiveness of the method in practical engineering was verified by an example of a car body chasis with orifice plate. Analysis result shows that compared with experimental results, the maximum error of deformation of rapid analysis method is about 3%, and the maximum error of strain is about 5%. Under different loads, the deviation of equivalent Young's modulus is about 2.5%, and the deviation of equivalent plate thickness is about 1.3%. The average calculation error of deformation and local stress of rapid analysis method is less than 6.7%, and the calculation time is shortened by about 50%. So, the rapid analysis method can replace the traditional method to analyze the performance of weight-reduced orifice plate structure.
- vehicle engineering,
- urban rail passenger coach,
- weight-reduced orifice plate structure,
- structure lightweight,
- finite element analysis,
- stiffness equivalence model

FullText(HTML)

References(30)

References

[1]	HONG Qiu-cai, LIU Wei-guo, ZHOU Da-yong. A study on body structure lightweighting in the transfiguration development of a sedan[J]. Automotive Engineering, 2017, 39 (2): 232-236. (in Chinese). https://www.cnki.com.cn/Article/CJFDTOTAL-QCGC201702018.htm
[2]	MAO Ai-hua. Multi-objective optimization design for electric bus body skeleton structure lightweight[D]. Changchun: Jilin University, 2015. (in Chinese).
[3]	XU Li, LIU Rong-gui, WEI Fang-fang. Analysis of plates with openings by finite element method[J]. Journal of Jiangsu University (Natural Science), 2002, 23 (5): 28-30. (in Chinese). doi: 10.3969/j.issn.1671-7775.2002.05.007
[4]	WANG Deng-feng, LU Fang. Body-in-white lightweight based on multidisciplinary design optimization[J]. Journal of Jilin University (Engineering and Technology Edition), 2015, 45 (1): 29-37. (in Chinese). https://www.cnki.com.cn/Article/CJFDTOTAL-JLGY201501005.htm
[5]	LAN Feng-chong, ZHUANG Liang-piao, ZHONG Yang, et al. Study and practice of car body structure lightweight design[J]. Automotive Engineering, 2010, 32 (9): 763-768, 773. (in Chinese). https://www.cnki.com.cn/Article/CJFDTOTAL-QCGC201009005.htm
[6]	TAN Zu-long. Finite element analysis of circular orifice plate[J]. Modern Manufacturing Technology and Equipment, 2017 (3): 78, 83. (in Chinese). https://www.cnki.com.cn/Article/CJFDTOTAL-SDJI201703039.htm
[7]	TANG Hui-min, WU Si, ZHANG Hui-min. Topology optimization geometry cleanup and meshing techniques[J]. China Strategic Emerging Industry, 2017 (16): 116. (in Chinese). https://www.cnki.com.cn/Article/CJFDTOTAL-ZLXC201716092.htm
[8]	LI Huan, DENG Jie, ZHANG Qi, et al. Study on structural optimization and mass reduction of a shaped nozzle based on DOE[J]. Journal of Nanjing University of Aeronautics and Astronautics, 2017, 49 (S): 40-44. (in Chinese). https://www.cnki.com.cn/Article/CJFDTOTAL-NJHK2017S1008.htm
[9]	LI Bai-jian, ZHU Liang-sheng, FU Xin-sha. Numerical analysis of corrugated steel plate-composite beam structure based on equivalent stiffness method[J]. Journal of South China University of Technology (Natural Science Edition), 2018, 46 (12): 111-120. (in Chinese). doi: 10.3969/j.issn.1000-565X.2018.12.014
[10]	FENG Yan, DU Guo-jun, ZHAO Wei-dong. Equivalent stiffness research of the construction orthogonal anisotropy truss core panel[J]. Chinese Journal of Applied Mechanics, 2018, 35 (4): 900-905. (in Chinese). https://www.cnki.com.cn/Article/CJFDTOTAL-YYLX201804034.htm
[11]	LI Bai-jian, FU Xin-sha, ZHU Liang-sheng. Research on mechanical properties of corrugated steel plate with relieving slab based on equivalent stiffness[J]. Journal of South China University of Technology (Natural Science Edition), 2018, 46 (9): 131-139. (in Chinese). https://www.cnki.com.cn/Article/CJFDTOTAL-HNLG201809019.htm
[12]	TANAKA S, YANAGIHARA D, YASUOKA A, et al. Evaluation of ultimate strength of stiffened panels under longitudinal thrust[J]. Marine Structures, 2014, 36: 21-50. doi: 10.1016/j.marstruc.2013.11.002
[13]	LI Yan, LI Xin-fu, MA Shi-wang. Groundstates for Kirchhoff-type equations with Hartree-type nonlinearities[J]. Results in Mathematics, 2019, 74 (1): 1-26. doi: 10.1007/s00025-018-0927-1
[14]	SUN Ling-yu, LENG Ding-xin, SUN Juan-juan, et al. An equivalent stiffness (ES) method for initial design of tube-based energy absorbers under lateral quasi-static compression[J]. Journal of Mechanical Science and Technology, 2015, 29 (2): 637-646. doi: 10.1007/s12206-015-0123-0
[15]	DUAN Zun-yi, YAN Jun, LEE I, et al. A two-step optimization scheme based on equivalent stiffness parameters for forcing convexity of fiber winding angle in composite frames[J]. Structural and Multidisciplinary Optimization, 2019, 59 (2): 2111-2129.
[16]	SUN Hong-lei, YANG Yi-min, SHI Li, et al. The equivalent stiffness of a saturated poroelastic halfspace interacting with an infinite beam under a moving point load[J]. Soil Dynamics and Earthquake Engineering, 2018, 107: 83-95. doi: 10.1016/j.soildyn.2018.01.022
[17]	SUN J D, TIAN E, LEI H, et al. The impact of helical gear parameters based on axial meshing transmission on Swash plate pulse CVT characteristics[J]. Applied Mechanics and Materials, 2012, 101/102: 224-227.
[18]	FENG Xiong, WANG Deng-feng, CHEN Shu-ming, et al. Multi-objective lightweight and crashworthiness optimization for the side structure of an automobile body[J]. Structural and Multidisciplinary Optimization, 2018, 58 (4): 1823-1843. doi: 10.1007/s00158-018-1986-3
[19]	SAKUNDARINI N, TAHA Z, ABDUL-RASHID S H, et al. Optimal multi-material selection for lightweight design of automotive body assembly incorporating recyclability[J]. Materials and Design, 2013, 50: 846-857.
[20]	CHENG Z Q, THACKER J G, PILKEY W D, et al. Experiences in reverse-engineering of a finite element automobile crash model[J]. Finite Elements in Analysis and Design, 2001, 37 (11): 843-860. doi: 10.1016/S0168-874X(01)00071-3
[21]	WANG Wen-wei, ZHOU Cheng-jun, LIN Cheng, et al. Electric bus body lightweight design based on multiple constrains[J]. Advanced Materials Research, 2012, 538-541: 3137-3144. doi: 10.4028/www.scientific.net/AMR.538-541.3137
[22]	PIERCE A A, PARKER B L, INGLETON R, et al. Novel well completions in small diameter coreholes created using portable rock drills[J]. Groundwater Monitoring and Remediation, 2018, 38 (1): 42-55. doi: 10.1111/gwmr.12257
[23]	ISMAIL N, EL-HASSAN H. Development and characterization of fly ash-slag blended geopolymer mortar and lightweight concrete[J]. Journal of Materials in Civil Engineering, 2018, 30 (4): 1-14.
[24]	BRANCATI R, MASSA G D, PAGANO S, et al. A magneto-rheological elastomer vibration isolator for lightweight structures[J]. Meccanica, 2019, 54 (4): 333-349.
[25]	WU Jian-ping, NUSHOLTZ G S, BILKHU S. Optimization of vehicle crash pulses in relative displacement domain[J]. International Journal of Crashworthiness, 2012, 7 (4): 397-414.
[26]	CHENG Xing-lei, YANG Ai-wu, LI Guang-ning. Model tests and finite element analysis for the cyclic deformation process of suction anchors in soft clays[J]. Ocean Engineering, 2018, 151: 329-341.
[27]	MUCCILLO M, GIMELLI A, SANNINO R. Multi-objective optimization and sensitivity analysis of a cogeneration system for a hospital facility[J]. Energy Procedia, 2015, 81: 585-596.
[28]	EGE K, ROOZEN N B, LECLÈRE Q, et al. Assessment of the apparent bending stiffness and damping of multilayer plates; modelling and experiment[J]. Journal of Sound and Vibration, 2018, 426: 129-149.
[29]	FENDER J, DUDDECK F, ZIMMERMANN M. On the calibration of simplified vehicle crash models[J]. Structural and Multidisciplinary Optimization, 2014, 49 (3): 455-469.
[30]	SIGMUND O, MAUTE K. Topology optimization approaches[J]. Structural and Multidisciplinary Optimization, 2013, 48 (6): 1031-1055.

Relative Articles

Supplements(0)

Cited By

Get Citation

PDF

XML

Article Metrics

Article views (795) PDF downloads(295)

Rapid analysis method of weight-reduced orifice plate structure based on stiffness equivalence model

doi: 10.19818/j.cnki.1671-1637.2019.03.010

Abstract

References

Catalog

Article Metrics

Related

Rapid analysis method of weight-reduced orifice plate structure based on stiffness equivalence model

doi: 10.19818/j.cnki.1671-1637.2019.03.010

Abstract

References

Catalog

Article Metrics

Related

Export File

Citation

Format

Content