Volume 22 Issue 5
Oct.  2022
Turn off MathJax
Article Contents
Article Navigation >  Journal of Traffic and Transportation Engineering  > 2022  >  22(5): 184-199
ZHU Wei-qing, SHI Hao-hui, ZHANG Guan-hua, LIU Yong-jian, LIU Jia-tong. Flexural performance and capacity of embedded H-shaped steel pile-abutment joint[J]. Journal of Traffic and Transportation Engineering, 2022, 22(5): 184-199. doi: 10.19818/j.cnki.1671-1637.2022.05.011
Citation: ZHU Wei-qing, SHI Hao-hui, ZHANG Guan-hua, LIU Yong-jian, LIU Jia-tong. Flexural performance and capacity of embedded H-shaped steel pile-abutment joint[J]. Journal of Traffic and Transportation Engineering, 2022, 22(5): 184-199. doi: 10.19818/j.cnki.1671-1637.2022.05.011
shu

Flexural performance and capacity of embedded H-shaped steel pile-abutment joint

doi: 10.19818/j.cnki.1671-1637.2022.05.011
  • 1.

    School of Highway, Chang'an University, Xi'an 710064, Shaanxi, China

  • 2.

    Shanxi Transportation Planning Survey and Design Institute Co. Ltd., Taiyuan 030032, Shanxi, China

  • 3.

    Research and Development Center on Road and Bridge Diagnosis and Maintenance Technology of Ministry of Transport, Shenyang 110166, Liaoning, China

Funds:

National Key Research and Development Program of China 2021YFB2601000

Young Talent Foundation of University Association for Science and Technology in Shaanxi 20180409

Opening Foundation of Research and Development Center on Road and Bridge Diagnosis and Maintenance Technology of Ministry of Transport 2018KFKT-02

Fundamental Research Funds for the Central Universities 300102212912

More Information
    Abstract
  • In order to investigate the flexural performance of embedded H-shaped steel pile-abutment joint for integral abutment bridges, the finite element model of the joint was established, and the effects of abutment thickness, concrete strength, steel pile orientation, buried depth ratio, steel strength, and axial load ratio on the flexural capacity and failure mode of the joint were analyzed. Based on the parameter research, the flexural model and the calculation formulae of bearing capacity were proposed for different failure modes. Analysis results show that the joint where the moment is around the strong axis of steel pile fails as compressive failure of abutment concrete when the buried depth ratio is less than 2.0. Increasing the buried depth ratio of steel pile and the strength of concrete can effectively enhance the flexural capacity of the joint. When the buried depth ratio is more than 2.0 for the joint where the moment is around strong axis of steel pile, or the buried depth ratio is more than 1.0 for the joint where the moment is around weak axis of steel pile, the failure behaves as the yielding of steel pile. Improving the material strength of steel pile will enhance the flexural capacity of the joint. With the increase of axial load ratio, the flexural capacity of the joint failing as the yielding of steel pile around the strong axis decreases significantly. While the effect of axial load ratio on the flexural capacity of the joint behaving as compressive failure or punching failure of abutment concrete can be ignored. The method proposed for calculating the flexural capacity of the joint can predicts the flexural capacity of embedded steel pile-concrete abutment joints with different failure modes accurately, and the average ratio of calculated values to simulated values is 0.981, and the average ratio of calculated values to experimental values is 0.941. So, it can be used to predict the flexural capacity and analyze the failure mode of the joint. It is suggested that the buried depth ratio is larger than 2.0 and the thickness of abutment is greater than 2.4 times the width of pile, so that the adverse compressive failure and punching failure of abutment concrete will be avoided.

     

    • FullText(HTML)
  • loading
    • References(30)
  • [1]
    黄福云, 庄一舟, 付毳, 等. 无伸缩缝梁桥抗震性能与设计计算方法研究[J]. 地震工程与工程振动, 2015, 35(5): 15-22. doi: 10.13197/j.eeev.2015.05.15.huangfy.003

    HUANG Fu-yun, ZHUANG Yi-zhou, FU Cui, et al. Review on the seismic performance and simplified design method of jointless bridge[J]. Earthquake Engineering and Engineering Dynamics, 2015, 35(5): 15-22. (in Chinese) doi: 10.13197/j.eeev.2015.05.15.huangfy.003
    [2]
    DICLELI M, ERHAN S. Low cycle fatigue effects in integral bridge steel H-piles under seismic displacement reversals[J]. Bridge Structures, 2013, 9(4): 185-190. doi: 10.3233/BRS-130064
    [3]
    WHITE H L. Integral abutment bridges: comparison of current practice between European countries and the United States of America[R]. New York: New York State Department of Transportation, 2007.
    [4]
    HOLLOWAY K P. Illinois integral abutment bridges: behavior under extreme thermal loading and design recommendations[D]. Urbana: University of Illinois at Urbana-Champaign, 2012.
    [5]
    TEGUH M, DUFFIELD C F, MENDIS P, et al. Seismic performance of pile-to-pile cap connections: an investigation of design issues[J]. Electronic Journal of Structural Engineering, 2006, 6(1): 8-18.
    [6]
    IEKEL P P, PHARES B, NOP M. Performance investigation and design of pile-to-pile cap connections subject to uplift[J]. Transportation Research Record, 2018, 2672(52): 278-290. doi: 10.1177/0361198118796733
    [7]
    AHN J H, YOON J H, KIM J H, et al. Evaluation on the behavior of abutment-pile connection in integral abutment bridge[J]. Journal of Constructional Steel Research, 2011, 67(7): 1134-1148. doi: 10.1016/j.jcsr.2011.02.007
    [8]
    MIRREZAEI S S, BARGHIAN M, GHAFFARZADEH H, et al. Retrofitting of steel pile-abutment connections of integral bridges using CFRP[J]. Structural Engineering and Mechanics, 2016, 59(2): 209-226. doi: 10.12989/sem.2016.59.2.209
    [9]
    齐朝阳. 整体式桥台-桩节点抗震性能试验研究[D]. 天津: 天津大学, 2017.

    QI Zhao-yang. Experimental research on seismic behavior of integral abutment-pile joint[D]. Tianjin: Tianjin University, 2017. (in Chinese)
    [10]
    LEE J, KIM W S, KIM K, et al. Strengthened and flexible pile-to-pile cap connections for integral abutment bridges[J]. Steel and Composite Structures, 2016, 20(4): 731-748. doi: 10.12989/scs.2016.20.4.731
    [11]
    黄福云, 陈伟, 徐普, 等. 整体式桥台-H形钢桩-土体系抗震性能试验[J]. 中国公路学报, 2020, 33(9): 180-192. doi: 10.3969/j.issn.1001-7372.2020.09.018

    HUANG Fu-yun, CHEN Wei, XU Pu, et al. Experimental on seismic performance of integral abutment-steel H-pile-soil system[J]. China Journal of Highway and Transport, 2020, 33(9): 180-192. (in Chinese) doi: 10.3969/j.issn.1001-7372.2020.09.018
    [12]
    HUANG Fu-yun, SHAN Yu-lin, CHEN Guo-dong, et al. Experiment on interaction of abutment, steel H-pile and soil in integral abutment jointless bridges (IAJBs) under low-cycle pseudo-static displacement loads[J]. Applied Sciences, 2020, 10(4): 1358. doi: 10.3390/app10041358
    [13]
    黄福云, 林友炜, 程俊峰, 等. 整体式桥台-H形钢桩-土相互作用低周往复拟静力试验[J]. 中国公路学报, 2019, 32(5): 100-114. https://www.cnki.com.cn/Article/CJFDTOTAL-ZGGL201905011.htm

    HUANG Fu-yun, LIN You-wei, CHENG Jun-feng, et al. Interaction of integral abutment-H-shaped steel pile-soil under reciprocating low-cycle pseudo-static test[J]. China Journal of Highway and Transport, 2019, 32(5): 100-114. (in Chinese) https://www.cnki.com.cn/Article/CJFDTOTAL-ZGGL201905011.htm
    [14]
    黄福云, 单玉麟, 薛俊青, 等. 整体式桥台H形钢桩基受力性能试验研究[J]. 东南大学学报(自然科学版), 2021, 51(6): 949-957. https://www.cnki.com.cn/Article/CJFDTOTAL-DNDX202106005.htm

    HUANG Fu-yun, SHAN Yu-lin, XUE Jun-qing, et al. Experimental study on mechanical behaviors of steel H-pile in integral abutment jointless bridges[J]. Journal of Southeast University (Natural Science Edition), 2021, 51(6): 949-957. (in Chinese) https://www.cnki.com.cn/Article/CJFDTOTAL-DNDX202106005.htm
    [15]
    黄福云, 张峰, 单玉麟, 等. 整体式桥台-桩基-土相互作用内力计算方法研究[J]. 中国公路学报, 2021, 34(6): 69-79. doi: 10.3969/j.issn.1001-7372.2021.06.008

    HUANG Fu-yun, ZHANG Feng, SHAN Yu-lin, et al. Calculation method of internal force of integral abutment pile foundation-soil interaction[J]. China Journal of Highway and Transport, 2021, 34(6): 69-79. (in Chinese) doi: 10.3969/j.issn.1001-7372.2021.06.008
    [16]
    黄福云, 单玉麟, 何凌峰, 等. 整体式桥台-H形钢桩基-土相互作用水平变形机理研究[J]. 中国公路学报, 2022, 35(5): 84-94. https://www.cnki.com.cn/Article/CJFDTOTAL-ZGGL202205008.htm

    HUANG Fu-yun, SHAN Yu-lin, HE Ling-feng, et al. Horizontal deformation mechanism of soil-steel H-pile interaction in integral abutment jointless bridges (IAJBs)[J]. China Journal of Highway and Transport, 2022, 35(5): 84-94. (in Chinese) https://www.cnki.com.cn/Article/CJFDTOTAL-ZGGL202205008.htm
    [17]
    SALMAN N N, ISSA M A. Displacement capacities of H-piles in integral abutment bridges[J]. Journal of Bridge Engineering, 2019, 24(12): 04019122. doi: 10.1061/(ASCE)BE.1943-5592.0001482
    [18]
    VASHEGHANI-FARAHANI R, ZHAO Q, BURDETTE E G. Seismic analysis of integral abutment bridge in Tennessee, including soil-structure interaction[J]. Transportation Research Record, 2010, 2201(1): 70-79. doi: 10.3141/2201-09
    [19]
    王威. 冲刷裸露H型钢桩—混凝土承台边节点抗震性能研究[D]. 徐州: 中国矿业大学, 2016.

    WANG Wei. Seismic performance of scoured steel H-pile to concrete cap edge connections[D]. Xuzhou: China University of Mining and Technology, 2016. (in Chinese)
    [20]
    XIAO Y, WU H, YAPRAK T T, et al. Experimental studies on seismic behavior of steel pile-to-pile-cap connections[J]. Journal of Bridge Engineering, 2006, 11(2): 151-159. doi: 10.1061/(ASCE)1084-0702(2006)11:2(151)
    [21]
    SHAMA A A, MANDER J B, AREF A J. Seismic performance and retrofit of steel pile to concrete cap connections[J]. ACI Structural Journal, 2002, 99(1): 51-61.
    [22]
    SHAMA A A, MANDER J B, CHEN S S. Seismic investigation of steel pile bents: Ⅱ. Retrofit and vulnerability analysis[J]. Earthquake Spectra, 2002, 18(1): 143-160.
    [23]
    陈林. H型钢桩与桩承台连接性能研究[D]. 长沙: 湖南大学, 2010.

    CHEN Lin. Experimentalresearch on steel H-pile-to-pile-cap connections[D]. Changsha: Hunan University, 2010. (in Chinese)
    [24]
    XIAO Y, CHEN L. Behavior of model steel H-pile-to-pile-cap connections[J]. Journal of Constructional Steel Research, 2013, 80: 153-162.
    [25]
    GUNER S, CHILUWAL S. Cyclic load behavior of helical pile-to-pile cap connections subjected to uplift loads[J]. Engineering Structures, 2021, 243(1): 112667.
    [26]
    ABENDROTH R E, GREIMANN L F. Field testing of integral abutments[R]. Ames: Iowa Department of Transportation, 2005.
    [27]
    QUINN B H, CIVJAN S A. Parametric study on effects of pile orientation in integral abutment bridges[J]. Journal of Bridge Engineering, 2017, 22(4): 04016132.
    [28]
    KENT D C, PARK R. Flexural members with confined concrete[J]. Journal of the Structural Division, 1971, 97(7): 1969-1990.
    [29]
    MATTOCK A H, GAAFAR G H. Strength of embedded steel sections as brackets[J]. Journal Proceedings, 1982, 79(2): 83-93.
    [30]
    HAWKINS N M. The bearing strength of concrete for strip loadings[J]. Magazine of Concrete Research, 1970, 22(71): 87-98.
    • Relative Articles
    • Supplements(0)
    • Cited By
  • 加载中

Catalog

    通讯作者: 陈斌, bchen63@163.com
    • 1. 

      沈阳化工大学材料科学与工程学院 沈阳 110142

    1. 本站搜索
    2. 百度学术搜索
    3. 万方数据库搜索
    4. CNKI搜索
    Get Citation
    PDF
    XML

    Article Metrics

    Article views (510) PDF downloads(41) Cited by()
    Proportional views
    Related

    Copyright《Journal of Traffic and Transportation Engineering》编辑部陕ICP备05001904号-1

    Address ：Editorial Department of Journal of Traffic and Transportation Engineering, Chang 'an University, Middle Section of South Second Ring Road, Xi 'an, Shaanxi（710064） Tel：029-82334388 Email：jygc@chd.edu.cn

    All visit:Today's visit:

    Supported by: Beijing Renhe Information Technology Co. Ltd    

    /

    DownLoad:  Full-Size Img  PowerPoint
    Return
    Return